0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Truck-Lite Round License Plate Lamp
This round, push in style light can be used as a license plate light or a control panel light. It is commonly used on the Mounting and Tilt Frame Assembly of several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0300867.
$4.82
Buyers Twist Lock Plunger Pin 3/4" Diameter
Camlock assembly with 3/4" plunger pin from Buyers Products.
$17.39
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
United Safety Tow Light w/ Case and Female Plug
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
$105.99
Amber/Clear Replacement Bulb
Option of amber or clear bulb.The Neutral White, High Intensity 12V, 180 Degree
Illumination Landscape, Park Light, Number, License Plate Light, Trunk Light,
Instrument/Gauge Light, Side Light 35 x Longer Life Time Compared with
Traditional Incandescent Bulbs. Plus Less Heat Output and Extremely Low Power
Consumption.
$2.52
–
$2.85
Zips Pivot Pin Kit Vulcan / Century 01 - 05
This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker
Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and
Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with
a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held
in place with an allen head bolt and washer on the top.
$53.99
B/A Products Wheel Lift Tie-Down Strap Assembly with D-Ring and Ratchet with Finger Hook
This 84" replacement Tie-Down Strap comes with a Ratchet that has a finger hook
attached to it on one end and a D-Ring attached to the other end. This strap is
yellow and comes with "Zip's" printed into the webbing.
$32.99
All-Grip Replacement Hook Latch
This is a replacement latch for All-Grip hooks. Be sure to check below for which one fits your hook.
$3.99
–
$45.99
Century Control Handle Assembly 5 Spool
This is a Miller Industries handle assembly for a 5-Spool Control Assembly.
See features for what is included in this part#
$306.99
Miller Loop Harness 20' and 21' Car Carriers
* (2) hydraulic hoses for the winch* Wiring harness for the light bar* Pre-assembled* 3/8" thick.
$379.99
Century Decal Plate 5 Spool Driver Side Prior '05
This is a Miller Industries Decal Plate for the driver side control box hood.
It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels
all the levers of a 5-spool system.
$47.99
Miller Bed Lock Pad 10 / 15 Series Prior to 2006
This is a Miller Industries bed lock pad for the Century 10 or 15 series prior
to 2005. It has been replaced by a new bed lock weldment 12-0801209.
$39.99
Miller Bed Lift Cylinder Pin For Car Carriers
This is a replacement lift cylinder pin on the bed of most car carriers.
This pin will fit the Century 10, 15, and 20 Series Carriers, the Champion
Aluminum and Steel Carriers, the Challenger Aluminum and Steel Carriers, the
Holmes Aluminum and Steel Carriers, and the Vulcan 10 and 15 Series Carriers
along with the Extreme Angle carriers.
$70.99
Century Decal Plate 5 Spool Passenger Side Prior '05
This is a Miller Industries Decal Plate for the passenger side control box
hood. It is designed for all Century/Vulcan Car Carriers prior to 2005
(Excluding LCG). It labels all the levers of a 5-spool system.
$47.99
Century Bed Pivot Pin 38" x 1.25" Century / Challenger / Champion / Holmes / Vulcan
This is a Bed Pivot Pin from Miller Industries that is used on the bed of car
carriers. It measures 38" long and has a diameter of 1-1/4". This Pivot Pin is
used in the tilt frame assembly of many Century, Challenger, Champion, Holmes,
and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.
$80.99
Related products
Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan
These are the spacer bars of the wheel lift on many light duty wreckers and a
few medium duty wreckers by Miller Industries. They are located on the top,
inside of the outer stinger and the top, outside of the inner stinger. These
spacer bars will fit the following wreckers: Century Modular Express 300
Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes
440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder,
Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold
separately.
$23.09
Chevron Wear Pad 1/2" x 2" x 3" Nylatron
This is an inner tube slide pad for the top side of the auto-grip wheel lift
option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad
sold separately.
$16.89
Miller Wear Pad Wheel Lift Inner Stinger Century 300 Series and Vulcan 800 Series
This is a wheel lift wear pad for the outside, top of the inner stinger on
Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on
the Century Express Modular 300 Series Wreckers by Miller Industries. See
Features for related parts and Brochures for reference charts.
$15.39
Century Bearing Pad 6 3/8" x 4" x 3/8"
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
$43.99
Zips Wheel Lift Wear Pad Kit Vulcan 880 / 890
Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit
includes (1)
$79.99
Mobile Lifts Wheel Lift Wear Pad Jerr-Dan HPL35 and HPL60
This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The
dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used
on the Jerr-Dan HPL-30 and HPL-60 Wreckers.
$12.19
Century Slider Pad 3" x 2 3/8" x 3/16"
This Slider Pad from Miller Industries is an inner tube slide pad for the
bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and
Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and
3/16" wide. Please see the brochure tab for a full list of breakdowns.
$10.89
Century Bearing Pad SF 2010 and Up 10S 96"
Note: Special Handling Fees Apply
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.
- 5/16"x96" Subframe Pad
- 2010 & Newer 10 Series Car Carriers
$124.99
Jerr-Dan Replacement Bed Lock Wear Pad
Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with
one of these new blocks.
$8.69
Century Wear Pad 3" x 3" Challenger Champion and Vulcan
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
$23.99
Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
$10.59
Century Slide Pad 7" x 3" x 3/8"
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
$17.79
Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
$14.19
Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL
This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century
211/300 Series, and Holmes 440SL by Miller Industries. They are located on the
top, inside of the outer stinger. See Brochures for reference chart.
$41.99
Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
$21.19
Century Bearing Pad In / Out Boom LCG
This is an inner & outer tube bearing pad for the wheel lift of a Century or
Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each
equipped wheel lift. See Features for which years/models they are used on.
$18.59
Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan
These are the spacer bars of the wheel lift on many light duty wreckers and a
few medium duty wreckers by Miller Industries. They are located on the top,
inside of the outer stinger and the top, outside of the inner stinger. These
spacer bars will fit the following wreckers: Century Modular Express 300
Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes
440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder,
Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold
separately.
$23.09
Chevron Wear Pad 1/2" x 2" x 3" Nylatron
This is an inner tube slide pad for the top side of the auto-grip wheel lift
option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad
sold separately.
$16.89
Miller Wear Pad Wheel Lift Inner Stinger Century 300 Series and Vulcan 800 Series
This is a wheel lift wear pad for the outside, top of the inner stinger on
Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on
the Century Express Modular 300 Series Wreckers by Miller Industries. See
Features for related parts and Brochures for reference charts.
$15.39
Century Bearing Pad 6 3/8" x 4" x 3/8"
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
$43.99
Zips Wheel Lift Wear Pad Kit Vulcan 880 / 890
Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit
includes (1)
$79.99
Mobile Lifts Wheel Lift Wear Pad Jerr-Dan HPL35 and HPL60
This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The
dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used
on the Jerr-Dan HPL-30 and HPL-60 Wreckers.
$12.19
Century Slider Pad 3" x 2 3/8" x 3/16"
This Slider Pad from Miller Industries is an inner tube slide pad for the
bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and
Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and
3/16" wide. Please see the brochure tab for a full list of breakdowns.
$10.89
Century Bearing Pad SF 2010 and Up 10S 96"
Note: Special Handling Fees Apply
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.
- 5/16"x96" Subframe Pad
- 2010 & Newer 10 Series Car Carriers
$124.99
Jerr-Dan Replacement Bed Lock Wear Pad
Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with
one of these new blocks.
$8.69
Century Wear Pad 3" x 3" Challenger Champion and Vulcan
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
$23.99
Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
$10.59
Century Slide Pad 7" x 3" x 3/8"
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
$17.79
Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
$14.19
Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL
This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century
211/300 Series, and Holmes 440SL by Miller Industries. They are located on the
top, inside of the outer stinger. See Brochures for reference chart.
$41.99
Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
$21.19
Century Bearing Pad In / Out Boom LCG
This is an inner & outer tube bearing pad for the wheel lift of a Century or
Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each
equipped wheel lift. See Features for which years/models they are used on.
$18.59
