0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Buyers Circuit Breakers Hi-Amp
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
$31.09
–
$41.29
3M Acrylic Foam Tape
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
$1.25
Buyers LED Strip Lighting
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
$16.89
–
$67.99
B/A Products G100 Chain Assembly w/ Cradle Grab Hooks
These Grade 100 Chain Assemblies come with a Cradle Grab Hook attached to each
end of each chain. Cradle Grab Hooks are far more superior than standard grab
hooks. Grade 100 chain is made from alloy steel and is extremely strong, 25%
higher work load limit than grade 80, making it ideal for recovery or lifting.
$154.99
–
$578.99
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
Miller Pivot-Style Wheel Lift L-Arm - Formula 6500 Wheel Lift on Century Wreckers
This pivot-style L-Arm from Miller Industries fits Formula 6500 wheel lifts on
Century wreckers. Also known as a tire restraint or wheel retainer, option of
driver or passenger side L-Arm fits 2 x 3 outer crosstubes (Part Nos.
12-0904158 and 12-0904189). This zinc-plated L-Arm also features an alignment
hole on the underside and includes a ratchet tie-down strap.
$544.99
ECCO Torus Lighthead LED 4-Up Center, Module, Amber
This is a replacement 4-up center LED module for a 21TR and 21TRP light bar.This is used on Torus style modules. This module is amber in color.
$98.99
Zip's Special Toolbox Mounting Bracket LR-5
Note: Special Handling Fees Apply for Specific Items
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
- 24"X24" or 24"X30"
- Pre drilled holes
- Sturdy steel angle iron
- Sold as each
Available in the following sizes
Item # Size Finish LR-2G 24" x 24" Galvanized LR-5 24" x 24" Powder Coated Black LR-5TG 24" X 30" Tall Galvanized LR-5T 24" X 30" Tall Powder Coated Black
$178.99
–
$240.99
Zip's LR-6G Galvanized Center Toolbox Mount Bracket
Available in the following sizes
| Item # | Size | Finish |
|---|---|---|
| LR-6G | 20" X 24" | Galvanized |
| LR-6 | 20" X 24" | Powder Coated Black |
| LR-6TG | 24" x 24" | Tall Galvanized |
| LR-6T | 24" x 24" | Tall Powder Coated Black |
$208.99
–
$256.99
Maxxima LED Marker Light 3/4" Round w/ Grommet
Maxxima M09300 Series of P2PC Combination Mini-Clearance Marker Lights. Each
Light Comes With An Attached Grommet For Quick Mounting. 3 LED Diodes Provide
Superior Light Output Meeting PC Requirements.
$5.39
–
$7.49
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Phoenix 12 Position Junction Box
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
$16.19
B/A Products Snatch Blocks w/ Latched Swivel Hook
Note: Special Handling Fees Apply for Specific Items
$43.99
–
$403.99
Whelen Vertex Series Surface Mount Flange Kit
This is a solid state flange assembly and is made of a grey polycarbonate with
a black or chrome-plated finish. A neoprene gasket and mounting hardware will
be included. This flange has the ability to surface mount any Vertex Super-LED
series warning light. The Vertex series warning light sold separately.
$10.49
–
$18.19
All-Grip Steel Core Winch Cable with Self-Locking Swivel Hook
Note: Special Handling Fees Apply for Specific Items
The All-Grip Steel Core Winch Cable with Self-Locking Swivel Hook is very strong. With a working load limit of up to 16,563 pounds and a minimum break strength as high as 58,800 pounds, you can rely on this to get the job done. Check the chart below for more information.
Plus, it’s very durable. With increased longevity, this 6x19 class of wire rope can last a long time as it withstands crushing and abrasion a lot better. Additionally, the steel core only adds to that resistance. Not to mention, the load can’t be dropped unless it’s intentional, thanks to the fact it has a self-locking hook.
Available in the following sizes
The All-Grip Steel Core Winch Cable with Self-Locking Swivel Hook is very strong. With a working load limit of up to 16,563 pounds and a minimum break strength as high as 58,800 pounds, you can rely on this to get the job done. Check the chart below for more information.
Plus, it’s very durable. With increased longevity, this 6x19 class of wire rope can last a long time as it withstands crushing and abrasion a lot better. Additionally, the steel core only adds to that resistance. Not to mention, the load can’t be dropped unless it’s intentional, thanks to the fact it has a self-locking hook.
- Wire Rope Size: 3/8" - 3/4"
- Hook Size: 2.25 Ton - 9 Ton
- Self-Locking hook
- Flemished Eye
- 6X19
- Steel core
Available in the following sizes
| Item # | Size | Length |
|---|---|---|
| WS38050LS-SC | 3/8" - 15,100 MBS | 50' |
| WS38075LS-SC | 3/8" - 15,100 MBS | 75' |
| WS38100LS-SC | 3/8" - 15,100 MBS | 100' |
| WS38125LS-SC | 3/8" - 15,100 MBS | 125' |
| WS38150LS-SC | 3/8" - 15,100 MBS | 150' |
| WS716150LS-SC | 7/16" - 20,400 MBS | 50' |
| WS716075LS-SC | 7/16" - 20,400 MBS | 75' |
| WS716100LS-SC | 7/16" - 20,400 MBS | 100' |
| WS716150LS-SC | 7/16" - 20,400 MBS | 150' |
| WS12050LS-SC | 1/2" - 26,600 MBS | 50' |
| WS12100LS-SC | 1/2" - 26,600 MBS | 100' |
| WS12150LS-SC | 1/2" - 26,600 MBS | 150' |
| WS12200LS-SC | 1/2" - 26,600 MBS | 200' |
| WS916100LS-SC | 9/16" - 33,600 MBS | 100' |
| WS916150LS-SC | 9/16" - 33,600 MBS | 150' |
| WS916200LS-SC | 9/16" - 33,600 MBS | 200' |
| WS916250LS-SC | 9/16" - 33,600 MBS | 250' |
| WS58100LS-SC | 3/4" - 58,800 MBS | 100' |
| WS58150LS-SC | 5/8" - 41,200 MBS | 150' |
| WS58200LS-SC | 5/8" - 41,200 MBS | 200' |
| WS58250LS-SC | 5/8" - 41,200 MBS | 250' |
| WS34200LS-SC | 3/4" - 58,800 MBS | 200' |
| WS34250LS-SC | 3/4" - 58,800 MBS | 250' |
| WS34300LS-SC | 3/4" - 58,800 MBS | 300' |
$105.99
–
$1,630.99
Century / Challenger / Holmes Detent Kit
Includes 12-0301398 ball, 12-0301197 spring, and 12-0708470 spacer
$47.99
Zips Pivot Pin Kit 3" Century F6500 Holmes DFT 650
Pivot Pin Kit, Century Formula 6500 and Holmes DFT-650 wheel lifts. Includes
(1) 12-0802903 Pivot Pin, (1) 12-0306748 Pivot Pin Bushing, (2) 12-0710092
Thrust Washers, (2) 80013 Pivot Pin Retaining Bolts, (1) 83230 Grease Zerk.
$241.99
B/A Products Wheel Lift Tie-Down Strap Assembly with D-Ring and Ratchet with Finger Hook
This 84" replacement Tie-Down Strap comes with a Ratchet that has a finger hook
attached to it on one end and a D-Ring attached to the other end. This strap is
yellow and comes with "Zip's" printed into the webbing.
$32.99
Related products
Vulcan Front Crosstube 3.5" Stop Pin Assembly
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
$37.99
Eagle Wheel Lift Attachment Bronze Bushing
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
$22.41
Century / Champion / Vulcan / LCG Right Crosstube 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
$417.99
Wheel Lift Crossbar Plate Century 300 Series Holmes 440SL and Vulcan 807
This is a centering crossbar plate for wheel lift on the Vulcan 807, Century
300, and Holmes 440SL Series by Miller Industries.
$139.99
Century / Champion / Vulcan / LCG Left 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
$417.99
Miller L-Arm Claw Pivot Pin Weldment Century Modular Midnight Express and Holmes 220 / 440SL
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
$92.99
Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
- Option of driver or passenger position
- Fits 2" x 3" outer crosstubes
- Pivot style receivers
- Alloy construction
- Scoop style tire pan
- 4,000-lb. capacity
- Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
- Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fits: - Century 400 Series
- Century 600 Series
- Challenger 4700 Series
- Challenger 4800 Series
$540.99
Vulcan 800 Series and Carriers - Grid Right 3.5"
Note: Special Handling Fees Apply
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
$773.99
Miller 2" Wheel Lift L-Arm - Century, Champion, Challenger and Vulcan Carriers
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
$209.99
Miller Wheel Lift L-Arms - Vulcan 10 Series Carriers and 800 Series LD Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
- 2 x 2.5 aluminum tube
- Opton of driver or passenger positioning
- Adjustment holes
- Grated scoop tire pan
- Use with 8800900 outer crosstube
- WLL: 4,000 lbs.
Fits: - 2003-Current Vulcan 10 Series Steel & Aluminum Carriers
- 2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
- 2010-Current Vulcan Modular 804 Wreckers
- 2010-Current Vulcan Modular 806 Wreckers
- 2008-Current Vulcan Modular 880/890 Wreckers
- 2002-Current Vulcan 805 Wreckers
- 2000-Current Vulcan 806 Wreckers
- 1999-Current Vulcan 880/890 Wreckers
$258.99
All-Grip Chevron Style T Handle Pin
This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 6" reach
$35.99
–
$54.99
B/A Products T Handle Pin 5/8"
This 5/8" diameter Pin comes with a t-handle and release button. It's for
Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.
$46.99
Miller Replacement L-Arm Pin Assembly
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
$14.89
Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
- Option of driver or passenger position
- Painted steel
- Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
Fits: - 2010 - Current Century Modular Midnight Express
- 2000 - Current Century Midnight Express
- 2007 - Current Century Express 300 Series Modular
- 2009 - Current Holmes 440SL
- 2007 - Current Vulcan Modular 807
- 2000 - Current Vulcan 810 Intruder
$635.99
Miller Rubber Stop Century 300 Series and Vulcan 807 / 810
This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan
810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.
$40.99
Miller Eagle Claw Spring Kit
Spring set for Eagle wheel lifts. This part is used to replace Part Number
AWS-1010-A.
$41.99
Vulcan Front Crosstube 3.5" Stop Pin Assembly
This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w
ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par
t can be used to replace Part Numbers: 8621400 and 880411500.
$37.99
Eagle Wheel Lift Attachment Bronze Bushing
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
$22.41
Century / Champion / Vulcan / LCG Right Crosstube 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
$417.99
Wheel Lift Crossbar Plate Century 300 Series Holmes 440SL and Vulcan 807
This is a centering crossbar plate for wheel lift on the Vulcan 807, Century
300, and Holmes 440SL Series by Miller Industries.
$139.99
Century / Champion / Vulcan / LCG Left 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,
$417.99
Miller L-Arm Claw Pivot Pin Weldment Century Modular Midnight Express and Holmes 220 / 440SL
This is a replacement L-arm claw pivot pin weldment used on the wheel lift of
the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL
light duty wreckers by Miller Industries. This is the pin that allows the L-arm
to pivot on the crossbar which secures the tire of towed vehicle. To view the
part schematics please click on the Brochure tab above.
$92.99
Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
- Option of driver or passenger position
- Fits 2" x 3" outer crosstubes
- Pivot style receivers
- Alloy construction
- Scoop style tire pan
- 4,000-lb. capacity
- Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
- Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fits: - Century 400 Series
- Century 600 Series
- Challenger 4700 Series
- Challenger 4800 Series
$540.99
Vulcan 800 Series and Carriers - Grid Right 3.5"
Note: Special Handling Fees Apply
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.
$773.99
Miller 2" Wheel Lift L-Arm - Century, Champion, Challenger and Vulcan Carriers
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
$209.99
Miller Wheel Lift L-Arms - Vulcan 10 Series Carriers and 800 Series LD Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10 Series car carriers and 800 Series light-duty wheel lifts with option of driver or passenger side fit. Sometimes called a tire restraint or wheel retainer, the 2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900. This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also features adjustment holes for proper tire fitment and a grated pan for improved grip.
- 2 x 2.5 aluminum tube
- Opton of driver or passenger positioning
- Adjustment holes
- Grated scoop tire pan
- Use with 8800900 outer crosstube
- WLL: 4,000 lbs.
Fits: - 2003-Current Vulcan 10 Series Steel & Aluminum Carriers
- 2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
- 2010-Current Vulcan Modular 804 Wreckers
- 2010-Current Vulcan Modular 806 Wreckers
- 2008-Current Vulcan Modular 880/890 Wreckers
- 2002-Current Vulcan 805 Wreckers
- 2000-Current Vulcan 806 Wreckers
- 1999-Current Vulcan 880/890 Wreckers
$258.99
All-Grip Chevron Style T Handle Pin
This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 6" reach
$35.99
–
$54.99
B/A Products T Handle Pin 5/8"
This 5/8" diameter Pin comes with a t-handle and release button. It's for
Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.
$46.99
Miller Replacement L-Arm Pin Assembly
Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.
$14.89
Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
- Option of driver or passenger position
- Painted steel
- Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
Fits: - 2010 - Current Century Modular Midnight Express
- 2000 - Current Century Midnight Express
- 2007 - Current Century Express 300 Series Modular
- 2009 - Current Holmes 440SL
- 2007 - Current Vulcan Modular 807
- 2000 - Current Vulcan 810 Intruder
$635.99
Miller Rubber Stop Century 300 Series and Vulcan 807 / 810
This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan
810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.
$40.99
Miller Eagle Claw Spring Kit
Spring set for Eagle wheel lifts. This part is used to replace Part Number
AWS-1010-A.
$41.99
