Tow Dolly Parts

Note: Special Handling Fees Apply

This lightweight Breakover Bar from In The Ditch was designed to work with a Speed Dolly and XD Dolly. It has a soft grip handle, and it is the lightest dolly bar on the market.

• Lightweight hollow tubing
• CNC-machined solid steel end
• Soft grip handle
• Length produces leverage

Prolong the life of and prevent maintenance issues on your In The Ditch Speed Dolly with this replacement 4 on 4" cast hub and bearing assembly. 1250-lb. capacity when assembled. This hub is for the SLX (Greaseable) style dollies. These are NOT interchangeable with the XL (Sealed Hub) dollies

This is an all-purpose rubber replacement tire for Dollies, Trailers, Hand Trucks & Carts. This is the tire only.

This is a complete aluminum hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, bolts and dust cover that you will need to complete your hub assembly.

This is a replacement cam lock rebuild kit for the Speed Dolly. This kit includes a roll pin, plunger, and spring.

Camlock assembly for Century Car Carrier from Diversified Products.

This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.

This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.

These Cam Locks have a plunger and spring design that is easier and more reliable to use than the old style locking pins. Allows for one hand operation to open the assembly and put it into the automatic locking positions. The pin will fully engage once the holes in your bar line up. Used on sling arms, stabilizer legs, wheel lift forks and more.

Don't neglect worn or damaged safety ratchets on your Collins SLZ Hi-Speed Dolly Set. Replace them today with new assemblies from Zip's AW Direct. We supply zinc-plated replacement ratchets for the left or right side of your Collins dollies for 2006 and newer models. With spring-assisted lever action, the safety ratchets keep the dolly's pry bar in check in case it slips or if you lose your footing on loose gravel or on slippery surfaces. They also allow for greater mobility in tight spaces and give you peace of mind while towing down the road.

This is a replacement Dolly Pin Kit for the X-Series Dollies by In The Ditch. Requires 2 pins per side frame.

This is a replacement sealed hub bearing kit for the X-Series dollies by In The Ditch.

Camlock assembly with 3/4" plunger pin from Buyers Products.

This is a steel flange bushing.

Replacement 4.80-8 C rated tire. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum load rating capacity.

Replacement tire for In The Ditch's Speed Tow Dolly. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum load rating capacity.

This is a dolly safety lock rebuild kit by Collins Manufacturing. This rebuild kit includes the safety lock grease zerk, safety lock roll pin, safety lock spring, safety lock ball, and safety lock handle.

This is a replacement bolt on spindle kit for the right hand side of the X-Series Standard Duty Dolly by In The Ditch.

This Grease Cap is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This Rubber Plug for ITD-7123 Grease Cap is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

Use this kit to replace damaged, worn or frozen bearings in your dolly wheels. This maintenance set fits most 1 dolly spindles. Buy one kit for each wheel. Replaces old Part No. CD-BEARING.

Zip's Cam Locks have a plunger and spring design that is easier and more reliable to use than the old style locking pins. Allows for one hand operation to open the assembly and put it into the automatic locking positions. The pin will fully engage once the holes in your bar line up. Used on sling arms, stabilizer legs, wheel lift forks and more.

This is a replacement bolt on spindle kit for the left hand side of the X-Series Standard Duty Dolly by In The Ditch.

Use these Twist Lock Plunger Pins on sling arms, stabilizer legs, wheel lift forks and more. Just drill a hole to accept the plunger pin and weld the barrel in place. Rotate the handle and the internal spring-loaded pin releases the held part or locks it into place.

This is a replacement right hand spindle assembly for Collin's Dollies. This spindle works with the "Zinc Plated" SZL Dollies built after February of 2016 with 4.80 or 5.70 tires. It includes a machined shoulder bolt.

This is a replacement dust cover for the wheel assembly on a Collins dolly hub by Collins Manufacturing. This cover keeps all dirt and filth out of the wheel bearing of the dolly wheel.

This cam lock is built to last. With its zinc plates, you can trust it to resist corrosion. Plus the grease zerks make it significantly easier to maintain. Finally, it’s also easy to use. With a spring-loaded pin, the lock is quick and useful.

This is a replacement left hand spindle assembly for Collin's Dollies. This spindle works with the "Zinc Plated" SZL Dollies built after February of 2016 with 4.80 or 5.70 tires. It includes a machined shoulder bolt.

This is a replacement compression spring for the dolly rails.

In The Ditch Towing Products provides a replacement sealed hub assembly.

This is a replacement bolt on spindle kit for the right hand side of the X-Series Standard Duty Dolly by In The Ditch.

1" Grease Seal, used for Speed Dolly, 4 bolt hub.

This Spindle Nut Retainer is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

Replacement 5.70 -8 D rated tire. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum load rating capacity.

This bearing kit is for a trailer hub with a diameter of 1". Bearing kit comes complete with bearings, seals, and cotter pins. Each kit does one wheel.

Note: Special Handling Fees Apply for Specific Items

This is a replacement aluminum dolly axle for Collins Dollies. There are two size options to choose from. The 87" is an extendable axle that measures 87" when fully extended and 61" when collapsed. The 56" is a single axle that measures 56" long and is 25 lbs. It is made from lightweight aluminum.

• Sold as Each
• Just as strong as steel
• Will fit a number of different makes of Collins Dollies
• Choose from 56" or 87"

This machined aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements. Rim comes with a high-pressure valve stem installed.

Note: Special Handling Fees Apply

This is a replacement bolt on spindle kit for the left hand side of the X-Series Standard Duty Dolly by In The Ditch.

This Spindle Jam Nut is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This is a complete steel hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, and dust cover that you will need to complete your hub assembly.

This D-Type Spindle Washer is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This replacement Right Hand Speed Dolly Spindle Assembly from In The Ditch includes a spindle, side plates, pivot axle, and installation manual.

This replacement Right Hand Speed Lube Dolly Spindle comes with the spindle, side plate, pivot axle, and installation guide.

Note: Special Handling Fees Apply for Specific Items

This is a replacement dolly side frame for the SLX Standard Duty X-Series Dolly. This is a complete side frame that includes hubs and 4.80 tires.

• Available in a Tuff Coat Black or Plated Zinc Chromate finish
• One Side Only
• Sold as each

This is a replacement right hand spindle assembly for Collin's Dollies. This spindle works with the SXL Dollies built before February of 2016 with 4.80 or 5.70 tires. It includes a machined shoulder bolt.

This is a replacement aluminum wheel assembly from Collins Manufacturing. This wheel is a 4.80 x 8 tire with a load range of "D" that is rated at 760 lbs. This wheel assembly comes with a diamond-cut aluminum rim. The aluminum rim won't rust and will prolong the life of your wheel. This is a good replacement option for your current Collins Dolly set up.

This replacement Left Handle Speed Dolly Spindle Assembly from In The Ditch includes a spindle, side plates, pivot axle, and installation manual.

Note: Special Handling Fees Apply

When responding to calls, the last thing we want is to spend a lot of time on the shoulder. The In The Ditch® Dollies and the new X-Series 4th Gen Axles are the perfect combination for reliable, durable, long lasting towing. And they keep getting better. The fourth generation of In The Ditch® Dolly Axles is the most advanced dolly axle in the world.

The new X-Series 4th Gen Axle is WIDER than ever. Not only is the Gen 4 Axle wider, but it is also now more CAPABLE at towing mid-sized SUVs and cars with wider stances than ever before. It maintains the same number of adjustment holes using a stainless-steel snap button. With new design changes, the gen 4 axle is more DURABLE to handle the rigors of towing. Our custom extruded aluminum tubing now features a stainless-steel rivet design. The new axle caps feature a more ergonomic design with a built-in handle, while maintaining the positive camber feature that's proven to help dolly tire and bearing longevity. With Almost 20 years of dolly manufacturing experience, you can rest assured you are getting the best axle on the planet.

• 88.75" total Width
• X-Series Design with 5 Adjustment Holes
• Stainless Steel Snap Button Axle Lock
• Positive Camber Axle Caps
• Optional T-Handle accessory for improved grip and also to hang Axles from our Axle Slide Tunnel Mount - Part #ITD-22092
• Custom Extruded Aluminum is lightweight and strong
• 2,000lb Capacity at Full Extension per Axle. 4,000lb Extended Capacity as a set
• ITD Endurance Powder Coated Axle Caps
• Fabricated Tire Plate is Designed to work perfect with our Speed Spacer
• Sold Individually
• DO NOT MIX AND MATCH WITH DIFFERENT GENERATIONS OF AXLES

This replacement Left Hand Speed Lube Dolly Spindle comes with the spindle, side plate, pivot axle, and installation guide.

This is a replacement bolt on spindle kit for the right hand side of the X-Series Extreme Duty Dolly by In The Ditch.

This is a replacement left hand spindle assembly for Collin's Dollies. This spindle works with the SXL Dollies built before February of 2016 with 4.80 or 5.70 tires. It includes a machined shoulder bolt.

This is a replacement rail plunger for aluminum rails from Collins Dolly.

This Chrome Acorn Style Lug Nut from In The Ditch is for both aluminum and steel wheels.

This is a replacement bolt on spindle kit for the left hand side of the X-Series Extreme Duty Dolly by In The Ditch.

This is a "Z" Series zinc plated dolly side frame with aluminum hubs and "NO" wheels & tires from Collins Mfg.

This 5/8" camlock assembly from Diversified Products is designed for many different applications, but its most common use is in the towing and recovery industry. It is used on wheel restraints,tow slings, towbars and many other applications requiring a vertical or horizontal locking device.

This replacement Left Hand XD Dolly Spindle Assembly from In The Ditch includes a spindle, side plate, pivot axle, and installation guide. It is used on XD Dollies from In The Ditch.

This is a replacement bolt on spindle kit for the right hand side of the X-Series Extreme Duty Dolly by In The Ditch.

This is a replacement bolt on spindle kit for the left hand side of the X-Series Extreme Duty Dolly by In The Ditch.