Toolboxes & Storage

These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car carrier beds. Sold as a pair.

Zip's Custom Toolbox Sliding Drawer System is a great way to maximize the dead space in your toolboxes on your Tow Trucks, Wreckers, and Car Carriers. These Sliding Aluminum Drawer Systems are a great way to store tools that you use on a regular basis at a recovery scene. These Aluminum Drawer Systems are bolt in ready and include mounting brackets. However this system doesn't include any mounting hardware (nuts and bolts). The mount angles are made from high quality .125" thick steel. These sliding aluminum drawer systems not only maximize your toolbox storage space, but also offer a custom look to the inside of your toolbox while on a recovery scene.

RC Industries Aluminum Toolboxes provide superior security, convenience, and protection for whatever you want to store. Heavy Duty Aluminum Toolbox.

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by square foot. Also available in 3'x4' Sheets and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

Note: Special Handling Fees Apply for Specific Items<br //><br //>Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds. <br //> <br //>

• 24"X24" or 24"X30"
• Pre drilled holes
• Sturdy steel angle iron
• Sold as each <br //> <br //> <span style="font-size: 18px;"/>Available in the following sizes <br //> <br //> <table style="undefined;table-layout: fixed; width: 434px;"/> <colgroup/> <col style="width: 65.88889px;" //> <col style="width: 72.88889px;" //> <col style="width: 186.88889px;" //> </colgroup/> <thead/> <tr/> <th/>Item #</th/> <th/>Size</th/> <th/>Finish</th/> </tr/> </thead/> <tbody/> <tr/> <td/>LR-2G</td/> <td/>24" x 24"</td/> <td/>Galvanized</td/> </tr/> <tr/> <td/>LR-5</td/> <td/>24" x 24"</td/> <td/>Powder Coated Black</td/> </tr/> <tr/> <td/>LR-5TG</td/> <td/>24" X 30"</td/> <td/>Tall Galvanized</td/> </tr/> <tr/> <td/>LR-5T</td/> <td/>24" X 30"</td/> <td/>Tall Powder Coated Black</td/> </tr/> </tbody/> </table/> <style/> th, td { padding-right: 20px; } .product-table-top { display: block; max-width: -moz-fit-content; max-width: fit-content; overflow-x: auto; white-space: nowrap; } </style/>

Easily mount toolboxes on rollbacks or carriers. Used for underbody toolboxes on car carrier beds.

In The Ditch Trash Can Mounts are made from aluminum and can be easily mounted to any carrier or vertical surface. These mounts are made from 1/8" aluminum and they come with pre-drilled mounting holes that will fit on their Pro Series Tool Boxes for easy installation. You can choose from a mount that will hold either a 4 gallon trash can or a 6 gallon trash can. The trash can and bungee cords are not included with these mounts. Shop for a

Note: Special Handling Fees Apply for Specific Items

Zip's Custom Broom or Shovel Holders are constructed of Steel and can be painted black or galvanized. These brackets are designed to be installed along side the control compartments of a Miller Industries LCG 12 & 16 Series or 10 Series Car Carriers. They simply bolt to the bottom side of the car carrier sub-frame. A threaded T-handle screws down to hold the broom or shovel securely in place. The 12 & 16 Series custom holder measures 37.5" between the brackets. The 10 Series custom holder measures 33.5" between the brackets. These holders require you to drill through the subframe to install the brackets.

• Custom built by Zip's
• Choose between the 12 & 16 Series or 10 Series Car Carrier
• Available in Galvanized or Painted finish
• Single or Dual square tubing
• Underside mount
• Subframe drilling required
• Additional Aluminum Mounting Plate not included in kit

Available in the following sizes

Item #	Size	Finish
ZP-CBSH-HOLDER	Single - 10 Series	Painted
ZP-CBSH-10S-DUAL-G	Dual - 10 Series	Galvanized
ZP-CBSH-10S-DUAL	Dual - 10 Series	Painted
ZP-CBSH-LCG-G	Single - 12 and 16 Series	Galvanized
ZP-CBSH-LCG	Single - 12 and 16 Series	Painted
ZP-CBSH-LCG-DUAL-G	Dual - 12 and 16 Series	Galvanized
ZP-CBSH-LCG-DUAL	Dual - 12 and 16 Series	Painted

RC Industries Heavy Duty Black Powder Coated Steel Toolboxes provide superior security, convenience, and protection for whatever your storage needs are. RC Toolboxes are proudly built in the Elkhart, IN for the American Working man. Each box features our pan formed door with automotive door seal ensuring that your valuables stay dry regardless of the road conditions. Our anchor compression latch is the most durable theft deterrent handle in the market, keeping tools safe.

In The Ditch's Trash Can Mounts are made from aluminum and can be easily mounted to the deck of a wrecker or any flat surface. You can choose from either a 4 gallon trash can mount or a 6 gallon trash can mount. Both are made from 1/8" thick aluminum and are easy to install with pre-drilled mounting holes. These mounts do not include a trash can or the bungee cords. Shop for your new

In the Ditch Pro Series Underbody Toolbox. The door on these boxes have a 400 lb rating so you can use it as a step. This series of boxes come with a single latch but has two internal rotary door strikers to keep the door securely closed and sealed from the weather. The In The Ditch Boxes come with pre-drilled holes just pop the plastic plug out of the pre-drilled hole to be able to us all the In The Ditch accessories.

<font size=4/>Available in the following sizes</font/>




<table style="undefined;table-layout: fixed; width: 435px"/>
<colgroup/>
<col style="width: 73.88889px"/>
<col style="width: 72.88889px"/>
<col style="width: 187.88889px"/>
</colgroup/>
<thead/>
  <tr/>
    <th/>Item #</th/>
    <th/>Size</th/>
    <th/>Finish</th/>
  </tr/>
</thead/>
<tbody/>
  <tr/>
    <td/>LR-6G</td/>
    <td/>20" X 24"</td/>
    <td/>Galvanized</td/>
  </tr/>
  <tr/>
    <td/>LR-6</td/>
    <td/>20" X 24"</td/>
    <td/>Powder Coated Black</td/>
  </tr/>
  <tr/>
    <td/>LR-6TG</td/>
    <td/>24" x 24"</td/>
    <td/>Tall Galvanized</td/>
  </tr/>
  <tr/>
    <td/>LR-6T</td/>
    <td/>24" x 24"</td/>
    <td/>Tall Powder Coated Black</td/>
  </tr/>
</tbody/>
</table/>
<style/>
    th, td {
    padding-right: 20px;
    }
    .product-table-top {
    display: block;
    max-width: -moz-fit-content;
    max-width: fit-content;
    overflow-x: auto;
    white-space: nowrap;
    }
</style/>
 

These Rubber Clamps from Buyers Products will clamp to objects 1/2" to 2-1/2" in diameter. Clamps are made to easily adjust to different size objects. The rubber is made from heavy duty transportation grade rubber that will not be affected by the hot or cold climates. Each of these clamps will support approximately 22 lbs.

Note: Special Handling Fees Apply for Specific Items<br //><br //>Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish. <br //> <br //> Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes <br //> <br //>

• The Ditch Tool Box Quick Mounts Only (Brackets sold separately)
• Works well with new Low Profile Car Carrier Beds
• Made from steel with a tuff coat black finish
• Sold as each (Not a pair)
<br //> <br //> Dimensions For Mounts:
• ITD-1581- Height: 14 9/16" Width: 7 1/8" Length: 27 3/4"
• ITD-1584- Height: 16 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1588 and ITD-1588-GLV- Height: 18 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1580 and ITD-1850-GLV- Height: 20 1/2" Width: 5 1/2" Length: 32 1/2"
Please see photos above for extra dimensions <br //> <br //> Following Parts Sold Separately:

<a href="https://zips.com/parts-detail/in-the-ditch-quick-mount-replacement-itd-6268" target="_blank"/><span style="text-decoration: underline;"/>In In The Ditch Quick Mount Bracket - #ITD-6268</a/><br //> <a href="https://zips.com/parts-detail/in-the-ditch-mount-spacer-(only)-itd-6340" target="_blank"/><span style="text-decoration: underline;"/>In The Ditch Mount Spacer (Only) - #ITD-6340</a/><br //>

Zip's Gas & Garbage Can Holder Kit includes a built-in step. To be installed on the front end of an underbody toolbox. Gas Can and Garbage Can NOT included.

This Stellar (formerly American Eagle) heavy duty steel drawer system has a flat top shelf. Has a .5" or a 2.5" high riser. All drawer widths in the product line utilize our unique key locking T handle. This feature provides a one-handed operation and conceals the latch mechanism for heavy-duty protection and an attractive appearance. Drawer systems are custom-made to your specifications. Each drawer system is engineered to fit your truck s compartment and configured with the drawer sizes that will work best for you.

This is Bawer's 100% polished stainless steel single door toolbox. Installed with polished lockable t-handles and gas shock door openers to assist with smooth opening and closing. The boxes have a weather tight seal to protect against harsh weather. These have a single main piece structure with no unnecessary welds which means a stronger box.

In The Ditch designed their XD "Extreme Duty" Trash Can Mounts to hold up to 60 lbs. of weight. Not only will these mounts hold up to 60 lbs. of weight, but they look good and will last for years. You can choose from either a 6 gallon can XD mount or 4 gallon can XD mount. These mounts are made from 1/8" thick aluminum and they have a bungee cord already installed. Both of these mounts can easily be mounted to any vertical surface such as tool boxes, truck frames, or garage walls. There is no trash can included with these mounts but we do offer those too. Shop for your new

This Stellar (formerly American Eagle) heavy duty steel drawer system has a flat top shelf. Has a .5" or a 2.5" high riser. All drawer widths in the product line utilize our unique key locking T handle. This feature provides a one-handed operation and conceals the latch mechanism for heavy-duty protection and an attractive appearance. Drawer systems are custom-made to your specifications. Each drawer system is engineered to fit your truck s compartment and configured with the drawer sizes that will work best for you.

These completely redesigned Lumber Baskets from In The Ditch are available in three different lengths: 48", 60, and 70". All of these baskets are 11" tall and 8" deep. Mounting is a snap; just bolt the basket to the back of your tool box with six 5/16" bolts using the pre-drilled holes. In minutes you will have a great place to store extra lumber, tire chains or anything else that you can think of. These Lumber Baskets are made from aluminum and they have drain holes in the bottom that will help them last for decades.

This Stellar (formerly American Eagle) heavy duty steel drawer system has a standard top shelf, 2.5" or .5" high riser. All drawer widths in the product line utilize our unique key locking T handle. This feature provides a one-handed operation and conceals the latch mechanism for heavy-duty protection and an attractive appearance. Drawer systems are custom-made to your specifications. Each drawer system is engineered to fit your truck s compartment and configured with the drawer sizes that will work best for you.

Zip's Custom Premium Toolbox Shelf Kits are an easy way to optimize the dead space in your toolbox on your Tow Truck, Wrecker, or Car Carrier. One of the many benefits of the premium shelf kits are you get dividers for your shelf to help keep all of your tools organized. These premium shelf kits get bolted to the inside of the toolbox. All necessary mounting hardware is included with these premium shelf kits. They are made from high quality .080" thick aluminum. These premium shelf kits not only maximize your toolbox storage space, but also offer a custom look to the inside of your toolbox while on a recovery scene.

The Handlelok provides an adjustable positive locking method to secure axes, hammers, bars and many other tools and equipment. The STRETCHLOK strap allows instant release. The Handlelok is a adjustable mounting bracket that provides secure mounting for tools, handles, poles, and other equipment. Grip range from 1/8" to 1-3/4".

Add some flash to your Zip's Custom Toolboxes with these custom trim piece. These trim pieces will give your toolbox a custom appearance with a professional finish. These stainless steel Zip's Custom trim pieces get mounted to outside of the Zip's Custom toolbox with double sided 3M tape.

This Broom and Shovel Rack is the perfect way to store your brooms and shovels. Mount this rack to the deck, wall, or roof for easy access. The angle of the mount can be adjusted to the angle that is most convenient for you. Come pre-drilled for bungee cords to make securing your brooms and shovels easy. The rack also comes with a bolt-on bracket that keeps your broom head or shovel head flat.