Free Shipping!
Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
0 Item(s)
You have no items in your shopping cart.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Tools and Equipment
- Lighting
- Straps, Chains and Slings
-
Auto and Truck Accessories
- Tire and Wheel Supply
-
Exterior Accessories
- Suspension Upgrades
- Truck Fenders and Mounts
- Decals
- Horns and Sirens
- Backup Alarms
- Truck Body Trim and Hand Rails
- Mud Flaps
- Truck and Headache Racks
- Trailer Hitches and Receivers
- Push Bumpers and Hardware
- Truck Steps, Ladders and Handles
- Side View Mirrors
- Replacement Fuel Tanks
- Mico Brake Locks
- Throttle Controls
- Sunvisors
- Truck Service Lines and Accessories
- Interior Accessories
- Cargo Accessories
- Business Forms and Manuals
- Snow Plows and Parts
- Salt and Sand Spreaders and Parts
- Dump Bodies and Parts
- Diesel Particulate Filters and Gaskets
- Lift Gates and Parts
- Winches and Cables
- Toolboxes and Storage
- Battery Service
- Safety
-
Equipment and Trailer Parts
- Cylinder and Pin Replacements
- Control Handle Assemblies and Hardware
- Control Valve Bodies and Assemblies
- Control Cables
- Wheel Lift Parts
- Pivot Pins and Kits
- Wear Pads and Kits
- Bearing Pads and Kits
- Boom End Sheaves, Guides and Hardware
- Winch Cable Tie Backs
- Bed Lock Kits and Hardware
- Light Pylons
- Underlift Parts
- Fender Flares
- Car Hauler Trailer Parts
- Hose Trays
- Trailer Jacks and Plates
- Hydraulics
- Electrical
- Merchandise
-
Shop Parts by Schematic
Skip the search. Order parts faster right from our diagrams here.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Tools and Equipment
- Lighting
- Straps, Chains and Slings
-
Auto and Truck Accessories
- Tire and Wheel Supply
-
Exterior Accessories
- Suspension Upgrades
- Truck Fenders and Mounts
- Decals
- Horns and Sirens
- Backup Alarms
- Truck Body Trim and Hand Rails
- Mud Flaps
- Truck and Headache Racks
- Trailer Hitches and Receivers
- Push Bumpers and Hardware
- Truck Steps, Ladders and Handles
- Side View Mirrors
- Replacement Fuel Tanks
- Mico Brake Locks
- Throttle Controls
- Sunvisors
- Truck Service Lines and Accessories
- Interior Accessories
- Cargo Accessories
- Business Forms and Manuals
- Snow Plows and Parts
- Salt and Sand Spreaders and Parts
- Dump Bodies and Parts
- Diesel Particulate Filters and Gaskets
- Lift Gates and Parts
- Winches and Cables
- Toolboxes and Storage
- Battery Service
- Safety
-
Equipment and Trailer Parts
- Cylinder and Pin Replacements
- Control Handle Assemblies and Hardware
- Control Valve Bodies and Assemblies
- Control Cables
- Wheel Lift Parts
- Pivot Pins and Kits
- Wear Pads and Kits
- Bearing Pads and Kits
- Boom End Sheaves, Guides and Hardware
- Winch Cable Tie Backs
- Bed Lock Kits and Hardware
- Light Pylons
- Underlift Parts
- Fender Flares
- Car Hauler Trailer Parts
- Hose Trays
- Trailer Jacks and Plates
- Hydraulics
- Electrical
- Merchandise
-
Shop Parts by Schematic
Skip the search. Order parts faster right from our diagrams here.
Looking for apparel? Shop Zip's Outfitters
0 Item(s)
You have no items in your shopping cart.
Crossbars
Menu
Showing 34 items item
Clear all filters- Price
-
-
-
-
- Brand
-
-
-
-
-
- Wheel Lift Components
-
- Wheel Lift Components HD
-
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Miller Century / Champion / Vulcan Crossbar 3.5"
Note: Special Handling Fees Apply
This 3.5" Crossbar from Miller Industries is used in the wheel lift and slide-in tire restraint assembly of Century, Century LCG, Champion, and Vulcan Car Carriers. The crossbar uses a 3.5" x 3.5" square tube and has a built in trailer ball plate. Please see the brochure tab for a list of breakdowns.
Fits:
2005-Current Century 10 Series Steel & Aluminum Carriers
2005-Current Century 15 Series Steel & Aluminum Carriers
2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
2005-Current Champion Steel & Aluminum 19'-21' Carriers
2005-Current Vulcan 10 Series Steel & Aluminum Carriers
2005-Current Vulcan 10 Series Extreme Angle Steel Carriers
This 3.5" Crossbar from Miller Industries is used in the wheel lift and slide-in tire restraint assembly of Century, Century LCG, Champion, and Vulcan Car Carriers. The crossbar uses a 3.5" x 3.5" square tube and has a built in trailer ball plate. Please see the brochure tab for a list of breakdowns.
Fits:
$1,092.99
Century 300 Series / Holmes 440SL / Vulcan 807 Crossbar
This is a crossbar for the Vulcan 807 Intruder, Century 300 Series, & Holmes 440SL by Miller Industries. See Features for related parts and brochures for reference chart. This part can be used to replace Part Number 12-0803917.
$2,740.99
Vulcan Crossbar 3.5"
Note: Special Handling Fees Apply
This is a 3.5" square crossbar by Miller Industries designed for Vulcan 804, 806, 860, 870, and 880 series wheel lifts and Vulcan car carrier wheel lifts. It uses VUL-880K1 pivot pin kit. See Features for related parts and brochures for reference chart. This part can be used to replace Part Number 8700150.
This is a 3.5" square crossbar by Miller Industries designed for Vulcan 804, 806, 860, 870, and 880 series wheel lifts and Vulcan car carrier wheel lifts. It uses VUL-880K1 pivot pin kit. See Features for related parts and brochures for reference chart. This part can be used to replace Part Number 8700150.
$935.99
Miller Century and Chevron Crossbar w/ 2" Center Pin
Note: Special Handling Fees Apply
This crossbar from Miller Industries can be used on Chevron Series 16, Series 20, Series 14, and Series 10 Carriers, as well as Chevron 408V/408T Renegade, 408, 408A, 410, 410A, and 512 Wreckers. It can also be used on Century LCG Generation II 16 Series Steel and Aluminum Carriers made from 2014 until now.
This crossbar from Miller Industries can be used on Chevron Series 16, Series 20, Series 14, and Series 10 Carriers, as well as Chevron 408V/408T Renegade, 408, 408A, 410, 410A, and 512 Wreckers. It can also be used on Century LCG Generation II 16 Series Steel and Aluminum Carriers made from 2014 until now.
- 2" Center Pin (Not Included)
- Used with Century and Chevron Wheel Lifts
- Length: 56.2"
- Width: 3.5"
- Height: 9"
Fits:
- Chevron 10, 14, 16, and 20 Series Carriers
- Chevron 408V/408T Renegade Wreckers
- Chevron 408, 408A, 410, 410A, and 512 Series Wreckers
- 2014-Current Century LCG Generation II 16 Series Steel & Aluminum Carriers
$1,719.99
Vulcan 850 and 890 Crossbar 4" x 4"
Note: Special Handling Fees Apply
Crossbar, Vulcan 850 and 890 series wheel lifts, uses the VUL-890K1 pivot pin kit. This part can be used to replace Part Number 850020300.
Crossbar, Vulcan 850 and 890 series wheel lifts, uses the VUL-890K1 pivot pin kit. This part can be used to replace Part Number 850020300.
$1,050.99
Century and Vulcan Crossbar 3"
This Inner Crosstube Weldment from Miller Industries uses a 3" x 3" square tube and has a built in trailer ball plate. It is used in the wheel lift and slide-in tire restraint assembly on Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See the brochure tab for a list of breakdowns.
$1,154.99
Zacklift Grid Bar Screw w/ Tapered End 1/2" x 13" x 1 1/2"
This is a replacement Zacklift grid bar screw w/ tapered end 1/2" x 13" x
1-1/2".
$51.99
Miller Century Wreckers w/ Formula III Wheel Lift Crossbar 4" x 4"
This is a Miller Industries Crossbar for Century Model Wreckers. This is a 4" x
4" crossbar. It is part of the Formula III Wheel Lift Assembly.
$2,349.99
Zacklift Z303 and Z30 Dog Bone
This is a Zacklift dog bone. It is for Zacklift Z303 and Z30.
$418.99
Zacklift Grid Crossbar 4" x 4" x 43"
This is a Zacklift grid crossbar 4" X 4" X 43" All Mod. It fits Z18, Z30, Z303,
Z403.
$368.99
Century 1624 Tacom MR-30 and FIII Crossbar Assembly
Miller Industries medium duty wheel lift crossbar assembly.
$2,803.99
Century Formula I 1996 and Newer Crossbar 3" x 3"
Note: Special Handling Fees Apply
This is a crossbar for a Century Formula I Wheel Lift Assembly. It will fit Formula I Wheel Lifts that were built in 1996 or newer. It uses a WL-300K3 pivot pin kit.
This is a crossbar for a Century Formula I Wheel Lift Assembly. It will fit Formula I Wheel Lifts that were built in 1996 or newer. It uses a WL-300K3 pivot pin kit.
- 3" x 3" square tube
- Used on Formula I wheel lifts after March 1996
- Accepts 12-0902456 & 12-0902457 standard l-arm outer crosst ubes
- Also accepts 12-0904152 & 12-0904153 pivot l-arm outer crosstubes
- Uses WL-300DK1 detent ball kit
- Length: 53"
- Width: 4"
- H eight: 9.25"
$743.99
Miller Century Crossbar 3.5"
This 3.5" x 3.5" square tube Crossbar from Miller Industries is used in the wheel lift assembly of Century 20 Series Car Carriers. I
t can also be used on Century Formula 6000 and Formula II Wheel Lifts with one piece pivot pins. See the brochure tab for a list of
breakdowns.
$986.99
Miller Century Crossbar Assembly EB4 / Express
Miller Industries light duty wheel lift crossbar.
$9,347.99
Miller Crossbar 5" x 5" Vulcan V100 V90 V70 V60 V50 and V40
Vulcan heavy duty V40, V50, V60, V70, V90 and V100 5" x 5" crossbar.
$2,384.99
Vulcan 880 / 890 Crossbar 3.5" x 3.5"
This is a complete crossbar assembly less the wheel retainers by Miller
Industries for the Vulcan 880/890 Series.
$3,249.99
Century Crossbar 3.5"
This 3.5" x 3.5" square tube Crossbar from Miller Industries is used in the wheel lift assembly of Century 20 Series Car Carriers. It can also be used on Century Formula 6000 and Formula II Wheel Lifts with one piece pivot pins. See the brochure tab for a list of breakdowns.
$935.99
Miller Century HDU Crossbar
This is a replacment crossbar for Century from Miller Industries.
$1,064.99
Miller Century 400 / 600 and 411 / 412 Crossbar Assembly 3" x 3"
Miller Industries light duty wrecker wheel lift crossbar. This 3" x 3"
crossbar is commonly used on Century Modular 400/600 & 411/412 wreckers.
$1,169.99
Miller Century EB-4 and 6500 Crossbar Assembly 56"
Miller Industries light duty wheel lift crossbar assembly.
$1,191.99
Miller Century Crossbar
This is a replacment crossbar for Century 3224 wreckers from Miller Industries.
$1,236.99
Miller Century 6500 Crossbar Assembly 61"
Miller Industries light duty wheel lift crossbar.
$1,293.99
Miller Century 211 Crossbar
This is a crossbar for the Century 211 by Miller Industries. See Features for
related parts and brochures for reference chart.
$1,595.99
Miller Century F6500 / Holmes DFT-650 Crossbar 3.5" x 3.5" Early Style
Note: Special Handling Fees Apply
Note: Due to size of product, additional handling charges may apply.
Note: Due to size of product, additional handling charges may apply.
- 3.5" x 3.5" Crossbar for Century F6500 Wheel Lift & Holmes DFT 650 Wheel Lift
- Accepts 12-0901406 & 12-0901407 standard 3500lbs l-arm cross tubes
- Also accepts 12-0904690 & 12-0904691 medium duty 6000lbs l-arm cross tubes
- Also accepts 12-0904158 & 12-0901459 pivot style cross tubes
- Uses WL-6500DK1 detent ball kit
$1,678.99
Miller Crossbar Assembly 56" w/ Center Bore
Miller Industries 56" light duty crossbar assembly with center bore
$1,768.99
Miller Formula 1 Crossbar Assembly w/ Cam Lock
Miller Industries light duty wheel lift crossbar.
$1,886.99
Filter
1 - 34 of 34 items
Newsletter
Information
Product Support
Customer service
Copyright © 2025 Zip's. All Rights Reserved. Seller reserves the right to adjust prices or correct errors. Privacy Policy