Bearing Pads and Kits

Note: Special Handling Fees Apply

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 10 and 12 Series Steel LCG Car Carrier. See Features for a list of parts that are included. This kit is for the Gen1 series beds 

• (2) 12-0308927-16 5/16"x16" LCG Subframe Bearing Pads
• (2) 12-0308927-66 5/16"x66" LCG Subframe Bearing Pads
• (2) 12-0308927-96 5/16"x96" LCG Subframe Bearing Pads
• (38) 12-0403114 1/4-20x1"x82 Deg Torx Scres
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21'6" & 22'2" Stee l Car Carrier. See Features for a list of parts that are included.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 26', 28', & 30' 20 Series Steel Car Carrier. See Features for a list of parts that are included.

This is a 16" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit

This is a 16" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 19'6" Steel Car Carrier prior to 2010. See Features for a list of parts that are included.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 20'2" Steel Car Carrier Prior to 2010. See Features for a list of parts that are included.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 17'6" Steel Car Carrier. See Features for a list of parts that are included.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 24' 20 Series Steel Car Carrier. See Features for a list of parts that are included.

• Pads: (10)12-0306021
• Screws: (50)12-0400071

Fits Century Right Approach and Vucan Extreme Angle

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 20'2" Right Approach and Vulcan Extreme Angle Car Carriers. See Features for a list of parts that are included.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 22'2" Right Approach Car Carrier. See Features for a list of parts that are included.

These are the spacer bars of the wheel lift on many light duty wreckers and a few medium duty wreckers by Miller Industries. They are located on the top, inside of the outer stinger and the top, outside of the inner stinger. These spacer bars will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold separately.

This is the outer tube slide pad for the bottom, inside of the wheel lift on the Vulcan 810 Intruders & Century Midnight Express. See Brochures for reference chart. Each pad sold separately.

This 2-1/4" Slide Pad from Miller Industries is used on the outer tube Boom/Wheel Lift Assembly of Several Miller Wreckers.

This Boom Bottom Slide Pad from Miller Industries is 15" long and 3" wide. It is used on the Boom and Outrigger Assembly of Century and Challenger Wreckers from Miller Industries. Please see the features below for a list of Wreckers and see the brochure tab for breakdowns.

Note: Special Handling Fees Apply

This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.

• 5/16"x96" Subframe Pad
• 2010 & Newer 10 Series Car Carriers

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.

• (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
• (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
• (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
• (44) 12-0400367 1/4-20 Nylon Lock Nuts
• (44) 12-0403009 1/4-20x1" Hold Down Screws
• (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws

Note: Special Handling Fees Apply

This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit 12-0940277.

• 5/16"x96" LCG Subframe Pad
• 2010 & Newer 10 Series Car Carriers

This is a replacement landing pad for a Century Subframe. This is sold as the pad only and does not include the hardware.

This is a 66" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit

This is a 76" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a Steel 16 Series LCG Car Carrier.