Reel and Hose Accessories

The Whip Hose Assemblies increases longevity of the main hose while reducing the user fatigue by eliminating weight of coupler/plug as well as increases the mobility in tight spaces and improves air tool ergonomics. The Flexzilla Whip Air Hose is a short length of hose with a swivel coupler on one end to increase longevity of the main hose and reduces user fatigue by eliminating the weight of the coupler/plug. Plus, select Flexzilla Whip Air Hose features a 1/4" MNPT ball swivel. With a 30 degree tilt and 360 degree swivel action, the ball increases mobility in tight work spaces. Overall you get improved air tool ergonomics.

Flexzilla Pro Reusable Fittings allow you to quickly repair Flexzilla hoses on the job site or create a custom length hose in just three easy steps.

In a cramped workspace, sometimes you have to pull hoses from an angle that puts pressure on the hose, eventually wearing it down and damaging it. However, with the Reelcraft Hose Roller Guide, this is a problem of the past. Designed to help guide the hose in and out of the reel from any angle, the roller guide helps your hose live a longer life. Additionally, this bracket should fit on just about any reel we sell.

Adjustable bumpers are solid molded rubber assuring a long life and nonslip grip. Bumpers allow the desired length of hose or cord to be permanently stored outside the reel. Bumpers are included on the reels purchased with hose or cord. When ordering, advise the part number, reel model and the hose I.D. and O.D or the cord AWG and number of conductors.

The Flexzilla Pro Water Nozzles adds more power to your spraying job, attaching the hose inline with the spray nozzle gives up to 30% more water flow, pressure and power. These heavy-duty nozzles are built to last in the toughest work environments.

This 360 degree swivel connector is all about versatility and is easy to use. A 3/4 in. inlet and outlet allows the connector to interface with a wide range of nozzles and hoses, giving it fantastic versatility.

Reels can't work without allowing a hose or cord to unwind and retract freely. That's what the swivel is for. Allowing the hose or cord to do what it needs to, you extend the life of the hose or cord. Plus, you prevent twists and tangles by allowing it to seamlessly retract.

On many reels, the hose comes flying back onto the reel without any sign of stopping and sometimes this even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

On many reels, the hose comes flying back onto the reel without any sign of stopping, and sometimes, this may even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

On many reels, the hose comes flying back onto the reel without any sign of stopping and sometimes this even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

On many reels, the hose comes flying back onto the reel without any sign of stopping, and sometimes, this may even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

This is a Zip's Custom 4 piece bracket that has a wide variety of uses. This bracket can store your extention cords or your air hoses. They can be used to customize your toolbox with the set up that is perfect for you.

On many reels, the hose comes flying back onto the reel without any sign of stopping and sometimes this even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that's a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

What do you do when you have multiple reels for multiple different jobs? You don’t need each one for every job, but you only have room for one. Well, you get yourself the Reelcraft Pivot Base Bracket. With it, you can mount a variety of different Reelcraft reels to it so you’re ready for any job.

Too many reels yet not enough space? Listen, we’ve got you covered. With the Reelcraft 340 Degree Pivot Base, you can mount different reels with ease. It also eliminates the need for expensive custom mounts or installation services. You just do it yourself.

This hose reel support panel welds to the front of RSB body for more stability.

These reusable fittings can customize hoses on the jobsite, in just a few simple steps you can easily create a custom length hose assembly for your specific needs.

****For Hose Outside Dia. Range

1.06 to 1.38 in

          On many reels, the hose comes flying back onto the reel without any sign of stopping, and sometimes, this may even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

It’s also super easy to attach. The adjustable bumper stop comes in two parts, which you place over the hose, and screw in. Since it’s also compatible with many reel series, you should be able to confidently buy a bump stop for your specific product and have it work.

This particular bump stop is used with a 3/4" inner hose diameter.

• Rubber
• Lightweight
• Accessory for reels
• Used with 3/4" inner hose diameter
• .32 lbs
• Compatible with many reel series

On many reels, the hose comes flying back onto the reel without any sign of stopping, and sometimes, this may even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.