Free Shipping!
Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
0 Item(s)
You have no items in your shopping cart.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Tools and Equipment
- Lighting
- Straps, Chains and Slings
-
Auto and Truck Accessories
- Tire and Wheel Supply
-
Exterior Accessories
- Suspension Upgrades
- Truck Fenders and Mounts
- Decals
- Horns and Sirens
- Backup Alarms
- Truck Body Trim and Hand Rails
- Mud Flaps
- Truck and Headache Racks
- Trailer Hitches and Receivers
- Push Bumpers and Hardware
- Truck Steps, Ladders and Handles
- Side View Mirrors
- Replacement Fuel Tanks
- Mico Brake Locks
- Throttle Controls
- Sunvisors
- Truck Service Lines and Accessories
- Interior Accessories
- Cargo Accessories
- Business Forms and Manuals
- Snow Plows and Parts
- Salt and Sand Spreaders and Parts
- Dump Bodies and Parts
- Diesel Particulate Filters and Gaskets
- Lift Gates and Parts
- Winches and Cables
- Toolboxes and Storage
- Battery Service
- Safety
-
Equipment and Trailer Parts
- Cylinder and Pin Replacements
- Control Handle Assemblies and Hardware
- Control Valve Bodies and Assemblies
- Control Cables
- Wheel Lift Parts
- Pivot Pins and Kits
- Wear Pads and Kits
- Bearing Pads and Kits
- Boom End Sheaves, Guides and Hardware
- Winch Cable Tie Backs
- Bed Lock Kits and Hardware
- Light Pylons
- Underlift Parts
- Fender Flares
- Car Hauler Trailer Parts
- Hose Trays
- Trailer Jacks and Plates
- Hydraulics
- Electrical
- Merchandise
-
Shop Parts by Schematic
Skip the search. Order parts faster right from our diagrams here.
-
- Shop Trucks & Trailers
- Shop Apparel
-
Shop Products
- Tools and Equipment
- Lighting
- Straps, Chains and Slings
-
Auto and Truck Accessories
- Tire and Wheel Supply
-
Exterior Accessories
- Suspension Upgrades
- Truck Fenders and Mounts
- Decals
- Horns and Sirens
- Backup Alarms
- Truck Body Trim and Hand Rails
- Mud Flaps
- Truck and Headache Racks
- Trailer Hitches and Receivers
- Push Bumpers and Hardware
- Truck Steps, Ladders and Handles
- Side View Mirrors
- Replacement Fuel Tanks
- Mico Brake Locks
- Throttle Controls
- Sunvisors
- Truck Service Lines and Accessories
- Interior Accessories
- Cargo Accessories
- Business Forms and Manuals
- Snow Plows and Parts
- Salt and Sand Spreaders and Parts
- Dump Bodies and Parts
- Diesel Particulate Filters and Gaskets
- Lift Gates and Parts
- Winches and Cables
- Toolboxes and Storage
- Battery Service
- Safety
-
Equipment and Trailer Parts
- Cylinder and Pin Replacements
- Control Handle Assemblies and Hardware
- Control Valve Bodies and Assemblies
- Control Cables
- Wheel Lift Parts
- Pivot Pins and Kits
- Wear Pads and Kits
- Bearing Pads and Kits
- Boom End Sheaves, Guides and Hardware
- Winch Cable Tie Backs
- Bed Lock Kits and Hardware
- Light Pylons
- Underlift Parts
- Fender Flares
- Car Hauler Trailer Parts
- Hose Trays
- Trailer Jacks and Plates
- Hydraulics
- Electrical
- Merchandise
-
Shop Parts by Schematic
Skip the search. Order parts faster right from our diagrams here.
Looking for apparel? Shop Zip's Outfitters
0 Item(s)
You have no items in your shopping cart.
- Products
- Equipment and Trailer Parts
- Boom End Sheaves, Guides and Hardware
- Miscellaneous Cable Guide Parts
Miscellaneous Cable Guide Parts
Menu
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Miller Cable Tie Back Spring Chevron 408 / 410
Chevron cable tie back spring for Chevron 408/410 wreckers.
$87.99
Miller Cable Follower w/ 1" Hole Chevron 410 and LMD 510 / 512
Chevron replacement cable follower with a 1" hole for the Chevron 410 and LMD
510/512 wreckers.
$231.99
Blue Steel Mounting Pin Holmes HD Delta Ring 750 and 850 Wreckers
Holmes Mounting Pin for the Heavy Duty D-Ring on 750 & 850 Wreckers. Designed
to be used with D-Ring (Part #MM-12B). Cold rolled shaft with Dimensions of 8
1/2" x 1 3/8".
$76.36
Miller Weldment Century and Vulcan Wreckers
This Cable Guide from Miller Industries is used on the Boom
Swivel Assembly of several Miller Wreckers. These include Century, Challenger
and Vulcan Wreckers. Please see the features below for a list of wreckers and
see the brochure tab for breakdowns.
$342.99
Miller Delta Ring Small Wreckers
Miller Cast Iron D-ring commonly used with small wreckers including Century
311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin
for Installation (Part #BA0259).
$118.99
Miller Mounting Pin Miller Small Wrecker Delta Rings
Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.
$26.39
Miller Hose Pulley Century 300 EB4 Express Challenger 4300
This is the hydraulic hose tension pulley on the Century 300 Express, EB4
Express, and Challenger 4300 Express Series by Miller Industries. See Brochures
for part schematics and Features for related parts and to see what models this
fits.
$69.99
Miller Mounting Pin HD Wrecker Delta Rings
Miller Industries Mounting Pin for the Heavy Duty D-Ring (Part #12-0719585) Used On
Century, Vulcan, & Challenger Integrated and Rotator Heavy Duty Wreckers.
$81.99
Swivel Boom Assembly Century 1140 1130 5030T35 and 7035 Either Side
Note: Special Handling Fees Apply
This is a swivel boom assembly for Century 1140, 1130, 5030T35, and 7035 fits either side from Miller Industries.
This is a swivel boom assembly for Century 1140, 1130, 5030T35, and 7035 fits either side from Miller Industries.
- Fits Century 1140 & 1130/ SDU4 & LDU, 5030T35, 7035 2-speed wreckers either side
$2,094.99
Miller Delta Ring Heavy Duty Wreckers
Miller Industries D-Ring for Heavy Duty Wreckers. Designed for use with Century, Vulcan, & Challenger Heavy Duty Integrated and Rotator Wreckers. Requires But Does Not Include Mounting Pin (Part #GA0215). This part can be used to replace Part Number MM12B.
$413.99
Zip's Boom Lock Kit Holmes 600 and 750
This is a Boom Lock Kit for a Holmes 600 & 750 Wrecker. This Pin is used to
hold the 2 booms together. You can pull this pin to unlock the 2 booms and
rotate the booms to the side if you have a side pull situation. This kit
includes a plunger pin, spring, and pull grip handle assembly.
$256.99
Miller Inner Stinger Weldment Vulcan 880 / 890 and Modular 880 / 890
Note: Special Handling Fees Apply
This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.
Fits: Vulcan 880 / 890 (03/2008 - Current)
Vulcan Modular 880 / 890 (06/1999 - Current)
This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.
Fits:
$1,689.99
Miller Hose Track Cover Century 300 EB4 Express Challenger 4300
This is the hydraulic hose tension track cover on the Century 300 Express, EB4
Express, and Challenger 4300 Express Series by Miller Industries. See Brochures
for part schematics and Features for related parts and to see what models this
fits.
$65.99
Boom Lock Standard Kit Holmes 600
This is the Standard Boom Lock Kit for a Holmes 600 Wrecker. This pin is used
to hold the 2 booms together. You can pull this pin to unlock the 2 booms and
rotate the booms to the side if you have a side pull situation. This kit
includes a plunger pin, spring, and pull grip handle assembly.
$253.99
Roll Pin, 3/16" x 2"
These are the roll pins for the sheave boom yoke shaft on the Midnight Express
by Miller Industries. Click on the brochure tab for a reference chart.
$0.19
Miller Plunger Pin, Holmes Wrecker
This Plunger Pin from Miller Industries is used on the Subframe Assembly of
Holmes DTU Generation II Wreckers. See the brochure tab for a breakdown.
$36.49
Miller Tensioner Mounting Angle, Century Midnight Express
This is a mounting angle for a cable tensioner on the Century Midnight Express
by Miller Industries. See Brochures for a part schematic.
$143.99
Holmes HD Delta Ring 750 and 850 Wreckers
Holmes Heavy-Duty D-Ring, Cast Iron. Typically used on Holmes 850's and 750's and some
of the larger Century hydraulic wreckers. Requires Mounting Pin (Part
#MM-8B) - Not Included.
$332.73
Miller Tensioner Cover, 810 P/T Boom
This is a replacement tensioner cover for 810 P/T boom from Miller Industries.
$148.99
Miller Hose Pulley Bracket Century 300 Series EB4 Express Challenger 4300
This is the hydraulic hose tension track bracket on the Century 300 Express,
EB4 Express, and Challenger 4300 Express Series by Miller Industries. See
Brochures for part schematics and Features for related parts and to see what
models this fits.
$418.99
Miller Angle Indicator Century 1060
This Boom Angle Indicator from Miller Industries provides the operator with an
exact reading of his boom elevation with only a glance. A standard features on
all Miller Industries Rotators, the Boom Angle Indicator is available as an
option on both integrated and fixed boom heavy duty towing and recovery units.
Mounting hardware is included for easy installation on integrated models, fixed
boom models will require your to drill and tap for proper installation.
$742.99
Miller Angle Indicator
This Miller Boom Angle Indicator is standard on all rotators with an Integrated
wheel lift.
$984.99
Filter
1 - 27 of 27 items
Newsletter
Information
Product Support
Customer service
Copyright © 2025 Zip's. All Rights Reserved. Seller reserves the right to adjust prices or correct errors. Privacy Policy