Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This Black Knob from Chevron is used on several Chevron Wreckers. These include
408V, 408T, 512, and 1014 Wreckers. The knob has a threaded hole that can be
twisted onto a screw or handle. Please see the features below for a list of
wreckers and the brochure tab for breakdowns.
This 2-1/2" Internal Snap Ring is used on the Auto Grip II assembly of Century
and Vulcan Car Carriers Please see the features below for a list of carriers
and see the brochure tab for a breakdown.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Update worn and tired straps on your In The Ditch Speed Tow dolly with this replacement strap. The black strap includes a ratchet and coated S-hooks for proper securement of a tire to the tow dolly.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Use the Phoenix 10 Pole Junction Box as a central junction block for trailers and
utility truck bodies. Mounting hardware included. Get better protection for
your vehicle. Fused junction boxes act as an added security blanket, making
them a definite upgrade from old-fashioned, hardwired junction boxes.
Make your recoveries easier with The RimSling! This synthetic rope sling is
designed slimmer yet has a higher . The RimSling has a protective Cordura
Sleeve over the entire sling giving it maximum protection. Also, it has a
special braid guard at the center of the sling providing extended life. A 6"
sling eye is located on either end of the sling. The RimSling is also Made in
the USA!
AmSteel-Blue Synthetic Rope is a proven alternative to steel cables and steel
winch lines. Size-for-size, AmSteel-Blue is the same strength as steel wire
rope - yet it floats! These 12-strand, single braid winch lines yield the
maximum in strength-to-weight ratio and are torque free. Meaning attachment
hardware with a swivel is not necessary. AmSteel-Blue has extremely limited
stretching - only 1% at full WLL (4:1). Also, AmSteel-Blue Rope has superior flex fatigue and
is abrasion resistant.
When compared to steel cables, AmSteel-Blue Winch Lines are a fraction of the
weight. For example, a 3/4 " x 100' steel cable weighs 100 lbs while an
AmSteel-Blue rope with the same dimensions only weighs 13.3 lbs - almost 8
times lighter! Just think about how much easier the handling of the synthetic
Amsteel-Blue is for your operators verses a steel cable. Also, it drastically
cuts down on the overall weight of your truck - especially heavy duty rotator
wreckers which have up to 5 to 6 winches!
Option of amber or clear bulb.The Neutral White, High Intensity 12V, 180 Degree
Illumination Landscape, Park Light, Number, License Plate Light, Trunk Light,
Instrument/Gauge Light, Side Light 35 x Longer Life Time Compared with
Traditional Incandescent Bulbs. Plus Less Heat Output and Extremely Low Power
Consumption.
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.
The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series
Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.
This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.
This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and
Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference
charts and Features for related parts and wrecker models this shaft will fit.
This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP
Wrecker by Miller Industries. It will also fit on the Modular Midnight Express.
This boom sheave yoke holds the sheave which helps guide your cable from the
winch to the boom. See Brochures for reference charts and Features for related
parts and models this part will fit.
This is the Boom Sheave Yoke Shaft for Century Midnight Express and Holmes 440
HP Wreckers by Miller Industries. It will also fit the Century Modular Midnight
Express. This is the Shaft that holds the sheave in the boom end yoke. See
Brochures for reference charts and Features for related parts and what models
this shaft will work with.
This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing
cable guides will help guide the winch cable from the boom end back to the
winch without it hanging down and scratching up your boom. This kit consists of
2 boom wings, one measures 27" and the other measures 32" long.
This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.
The Revolution Boom Head from In The Ditch is a direct replacement for the
Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This
wire rope guide cover comes off with one hand, allowing for easy wire rope
installation.
This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.
This is the boom end cable guide for many light duty wreckers by Miller
Industries. This cable guide replaces part number 12-0800735. See Brochures for
a reference chart and Features for related parts and wrecker models this cable
guide will fit.
This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2".
This sheave is used on the Boom Assembly of many Century, Challenger, Holmes,
and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies
and parts schematics.
This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 -
Current), and it will also fit on the Modular Midnight Express (2010 - Current)
as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480
Wreckers.
This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes
Light Duty Wreckers by Miller Industries. See Brochures for part schematics and
Features for related parts and to see what models this boom end sheave will
fit.
Miller Cast Iron D-ring commonly used with small wreckers including Century
311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin
for Installation (Part #BA0259).
Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.
The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series
Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.
This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.
This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and
Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference
charts and Features for related parts and wrecker models this shaft will fit.
This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP
Wrecker by Miller Industries. It will also fit on the Modular Midnight Express.
This boom sheave yoke holds the sheave which helps guide your cable from the
winch to the boom. See Brochures for reference charts and Features for related
parts and models this part will fit.
This is the Boom Sheave Yoke Shaft for Century Midnight Express and Holmes 440
HP Wreckers by Miller Industries. It will also fit the Century Modular Midnight
Express. This is the Shaft that holds the sheave in the boom end yoke. See
Brochures for reference charts and Features for related parts and what models
this shaft will work with.
This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing
cable guides will help guide the winch cable from the boom end back to the
winch without it hanging down and scratching up your boom. This kit consists of
2 boom wings, one measures 27" and the other measures 32" long.
This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.
The Revolution Boom Head from In The Ditch is a direct replacement for the
Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This
wire rope guide cover comes off with one hand, allowing for easy wire rope
installation.
This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.
This is the boom end cable guide for many light duty wreckers by Miller
Industries. This cable guide replaces part number 12-0800735. See Brochures for
a reference chart and Features for related parts and wrecker models this cable
guide will fit.
This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2".
This sheave is used on the Boom Assembly of many Century, Challenger, Holmes,
and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies
and parts schematics.
This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 -
Current), and it will also fit on the Modular Midnight Express (2010 - Current)
as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480
Wreckers.
This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes
Light Duty Wreckers by Miller Industries. See Brochures for part schematics and
Features for related parts and to see what models this boom end sheave will
fit.
Miller Cast Iron D-ring commonly used with small wreckers including Century
311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin
for Installation (Part #BA0259).