Equipment & Trailer Parts | Replacement Parts

Sort by

Century Control Handle 8" Blue

This is a replacement control handle for the new Miller Car Carriers. It is blue in color, and measures 8" long. 1/2-13 thread.

$41.09

Century Control Handle 8" Gray

This is a replacement control handle for the new Miller Car Carriers. It is Gray in color, and measures 8" long.

$41.09

Rub-A-Fender Fenderette Fender Flare 2-1/4" Wide

Special high grade weather-resistant industrial rubber fender for trucks, busses, tankers and trailers. After a brush against a wall, loading dock, or another vehicle, rub-a-fenders return to original shape. Solve legal width problem - easily installed - always attractive. Approved for use by leading truck and bus body fabricators. They are commonly used in applications where there is no inner fender lip on which to fasten the fenderette.

$4.90

Century Control Handle 8" Red

This is a replacement control handle for the new Miller Car Carriers. It is Red in color, and measures 8" long.

$41.09

All-Grip Chevron Style T Handle Pin

This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 3" reach

$35.99 – $75.99

Jerr-Dan Replacement Bed Lock Wear Pad

Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with one of these new blocks.

$9.39

Chevron Left Body Lock Hold Down Bracket Kit

This is a replacement body lock hold down bracket kit for the driver side of a Chevron Car Carrier. This kit includes the left hold down bracket, the roller bearing, the thrust washer, and a nylon lock nut. To view the models this hold down kit fits see Features below.

$121.99

Chevron Body Lock Hold Down Bracket Kit

This is a replacement body lock hold down bracket kit for the passenger side of a Chevron Car Carrier. This kit includes the right hold down bracket, the roller bearing, the thrust washer, and a nylon lock nut. To view the models this hold down kit fits see Features below. To view the part schematics, see the Brochure tab.

$121.99

Miller 2" Wheel Lift L-Arm - Century, Champion, Challenger and Vulcan Carriers

This zinc-plated slide-in L-Arm fits the wheel lifts on various models of Century, Holmes and Challenger wreckers and Century, Champion, Challenger and Vulcan car carriers.

$209.99

Century Cable Tie Back HD Wreckers

This spring secures winch cable hook on large wreckers. This spring is used on Vulcans and late model Century units as a cable tie-back. This spring links to the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting tube. Compatible with 2004 Units and Newer.

$30.39

B/A Products T Handle Pin 5/8"

This 5/8" diameter Pin comes with a t-handle and release button. It's for Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.

$64.99

Miller 6.5" Thrust Washer Century / Challenger / Holmes

This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many different Miller Wrecker assemblies. These assemblies include the boom, wheel lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes Wreckers. Please see the brochure for a full list of breakdowns.

$12.99

Miller Control Long Knobs

These are Miller Industries Control Handle Knobs. They are offered in Blue (12-0311699), Red (12-0311700), Green (12-0311701) and Gray (12-0311702).

$18.49

Century Seal Kit Bed Slide or Bed Tilt

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0304219, 12-0304190, and 12-0306388.

$130.99

Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

$12.69

Century Slide Pad 7" x 3" x 3/8"

This Slide Pad from Miller Industries is used in the wheel lift, underlift, and tower assemblies of several Century, Challenger, and Holmes wreckers. This slide pad measures 7" long, 3" tall, and 3/8" wide.

$21.29

In The Ditch Removable Wire Rope Guide Cover

The Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This wire rope guide cover comes off with one hand, allowing for easy wire rope installation.

$30.49

Miller Bottom Cable Guide Heavy Duty Wreckers

This is a replacement cable guide bottom assembly for heavy duty wreckers by Miller Industries. This bottom assembly will fit Century 1040S, 1060S, 1075S, 1130/1140, 9055, Challenger 6807/T-50, CH-45, 9909/8808 Rotators, and Vulcan V-100.

$35.89

Miller Replacement L-Arm Pin Assembly

Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.

$17.89

Miller Bed Lock Roller Wheel LCG Gen II

This is a Miller Industries bed lock roller on Century/Vulcan Generation II car carriers. Refer to bed lock assembly 12-364220K. Each assembly includes 2 rollers.

$58.99

Century Control Handle Assembly 5 Spool

This is a Miller Industries handle assembly for a 5-Spool Control Assembly. See features for what is included in this part#

$331.99

Miller Drivers Side Bed Lock Hold Down LCG Gen II

This is a Miller Industries bed lock hold-down for the driver side on Century/Vulcan Generation II car carriers. Refer to bed lock assembly 15-364220K.

$73.99

Miller L-Arm Claw Pivot Pin Weldment Century Modular Midnight Express and Holmes 220 / 440SL

This is a replacement L-arm claw pivot pin weldment used on the wheel lift of the Century Modular Midnight Express and the Holmes 220 Snatcher and 440SL light duty wreckers by Miller Industries. This is the pin that allows the L-arm to pivot on the crossbar which secures the tire of towed vehicle. To view the part schematics please click on the Brochure tab above.

$100.99

Miller Steel Wheel Lift L-Arm - Century, Champion, Holmes and Vulcan Carriers

Note: Special Handling Fees Apply

This zinc-plated mild steel L-Arm from Miller Industries fits both sides of the wheel lift on Century, Champion, Holmes and Vulcan car carriers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm slides into the outer crosstube for a secure tire rest.

Driver or passenger position
Zinc-plated mild steel
Adjustment holes
2" x 2" x 31.86"

Fits:
2001-Current Century 10 Series Steel & Aluminum Carriers
2009-Current Century LCG 12 Series Steel & Aluminum Carriers
2002-Current Century 15 Series Steel & Aluminum Carriers
2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
2006-Current Century 20 Series Steel & Aluminum Carriers
2001-Current Champion Steel & Aluminum 19'-21' Carriers
2001-Current Holmes 10 Series Steel & Aluminum Carriers
2005-Current Vulcan 10 Series Steel & Aluminum Carriers

$265.99

In The Ditch Replacement Spring

Replacement spring for Spring Tube.

$24.59

Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan

This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload wreckers by Miller Industries. This cylinder will fit Century Express 300 Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL, Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part schematics click the Brochures tab.

$860.99

Chevron Wear Pad 1/2" x 2" x 3" Nylatron

This is an inner tube slide pad for the top side of the auto-grip wheel lift option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.

$20.29

Jerr-Dan thrust Washer, BIC

pivot pin kit use 1001171010

$19.99

Miller Control Cable 84" Century and Vulcan Light Duty Wreckers

This replacement control cable from Miller Industries is for Century and Vulcan Light Duty Wreckers. This is a marine grade cable th at measures 84" long and has a 1" stroke. This cable replaces part numbers: 12-0311724 and 518-1007200.

$211.99

Zips Pivot Pin Kit Heavy Duty Century 5030 and Larger

Pivot Pin Kit for Century 5030, 5130, 5230, 7035, 9055 and SDU underlifts with the 5" x 5" crossbar.

$1,041.99

Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers

Note: Special Handling Fees Apply for Specific Items

This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.

Option of driver or passenger position
Painted steel
Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and 12-0803911

Fits:
2010 - Current Century Modular Midnight Express
2000 - Current Century Midnight Express
2007 - Current Century Express 300 Series Modular
2009 - Current Holmes 440SL
2007 - Current Vulcan Modular 807
2000 - Current Vulcan 810 Intruder

$706.99

Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL

This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century 211/300 Series, and Holmes 440SL by Miller Industries. They are located on the top, inside of the outer stinger. See Brochures for reference chart.

$45.09

Century / Champion / Vulcan / LCG Right Crosstube 3.5"

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,

$463.99

In The Ditch Boom Head

This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.

$374.99

Miller Thrust Washer, 1/16"

This Thrust Washer from Miller Industries has a diameter of 10" and a thickness of 1/16". It is used on many different Miller wrecker assemblies, including, SDU, LDU, Underlift, and Tower assemblies on Century, Challenger, and Holmes wreckers. Please see the brochure tab for a list of breakdowns.

$56.99

Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan

These are the spacer bars of the wheel lift on many light duty wreckers and a few medium duty wreckers by Miller Industries. They are located on the top, inside of the outer stinger and the top, outside of the inner stinger. These spacer bars will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold separately.

$26.49

Miller Bed Lock Pad 10 / 15 Series Prior to 2006

This is a Miller Industries bed lock pad for the Century 10 or 15 series prior to 2005. It has been replaced by a new bed lock weldment 12-0801209.

$43.19

20% OFF

Zip's Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers

Note: Special Handling Fees Apply for Specific Items

L-shaped Wheel Lift Arms from Zip's are made from welded steel tube and are designed to replace either the driver side or passenger side of an auto-loading wheel lift on light-duty wreckers from Miller Industries. Powder-coated black for corrosion resistance, the steel composition ensures the arms can withstand the weight and stress of lifting heavy vehicles without compromising their structural integrity.

The design and construction of these wheel lift arms offer stability and leverage during the lifting process. The pivoting end is reinforced to eliminate any sag while clamping the tire, and the L-shape design creates a tight and secure hold on the tires. A locking mechanism prevents accidental release and ensures the safety of the towed vehicle.

Sold individually, these wheel lift arms are designed to fit various tow truck models, including Century Modular, Century Express, Holmes and Vulcan.This compatibility ensures a seamless integration into different towing setups. See the fitment list below to find the specific models of auto-loading wreckers for these wheel lift arms.

Steel tube construction
Reinforce pivot point
Powder-coated black for corrosion resistance
Passenger or driver side positioning
L-shape design
Locking mechanism
Sold individually

Fitment:

2010 - Current Century Modular Midnight Express
2000 - Current Century Midnight Express
2007 - Current Century Express 300 Series Modular
2009 - Current Holmes 440SL
2007 - Current Vulcan Modular 807
2000 - Current Vulcan 810 Intruder

$569.99

Century Wear Pad 3" x 3" Challenger Champion and Vulcan

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

$27.19

Miller Cable Tie Back Spring Chevron 408 / 410

Chevron cable tie back spring for Chevron 408/410 wreckers.

$87.99

Miller Control Cable 114" Century and Challenger Heavy Wreckers

This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 114" long and has a 1" stroke. Please see Features for what models this control cable will fit.

$161.99

Miller Roll Pin 1/4" x 1 3/4"

This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.

$0.29

Zips Pivot Pin Kit Wrecker / Carrier 01 and Older Formula I

This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts ('01 and older). This kit includes one

$190.99

Miller Thrust Washer, 1/8"

This Thrust Washer from Miller Industries has a diameter of 10" and a thickness of 1/8". It is used on many different Miller wrecker assemblies, including, SDU, LDU, Underlift, and Tower assemblies on Century, Challenger, and Holmes wreckers. Please see the brochure tab for a list of breakdowns.

$90.99

Miller Cable Follower w/ 1" Hole Chevron 410 and LMD 510 / 512

Chevron replacement cable follower with a 1" hole for the Chevron 410 and LMD 510/512 wreckers.

$231.99

Century / Champion / Vulcan / LCG Left 3.5"

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,

$463.99

Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

$93.99

Jerr-Dan Wheel Lift Wear Pad

This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. This wear pad is used on the Jerr-Dan HPL-30 and HPL-60 Wreckers.

$13.29

Miller Weldless Chain Link 5/8" Used w/ Cable Tie Back

This welded link is commonly used in conjunction with the cable tie-back springs on Miller Century, Vulcan and Challenger Heavy Duty Wreckers See part numbers:

$24.59

Century Clevis Pin Carrier Control Handles 5/16" x 1"

This clevis pin measures 5/16" x 1". To view part schematics click on the Brochure tab.

$6.89

Miller Control Knob Old No Label

This is an older style Miller Industries Control Handle Knob. It is black in color, no markings, and is used for multiple functions on a light duty wrecker. See Features for related wreckers and Brochures for reference charts. This part can be used to replace Part Number 9032106.

$15.59

Century Spacer Pad Underlift Heavy Duty Wreckers

This is a replacement spacer pad that bolts to the underside of the underlift boom to help the boom slide in and out efficiently. This pad is used on Century and Challenger heavy duty wreckers by Miller Industries. To view specific models this pad fits see Features below. To view the part schematics click on the Brochure tab.

$48.79

Vulcan 807 Aluminum Bronze Wheel Lift Bushing

This is an aluminum bronze bushing for a wheel lift pivot pin on a Vulcan 807 by Miller Industries.

$90.99

Miller 4 Spool Control Valve

This 4 Spool Hydraulic Control Valve from Miller Industries fits on Miller 10 Series Car Carriers (Prior to 2001) and Miller 30 Seri es Car Carriers (2005-Current). It is also used on most twin line Century/Vulcan Wreckers. See the attached brochures for related pa rts data. This part can be used to replace Part Number 12-0303093.

$1,080.99

Miller Deck Mount Pylons 10 12 15 16 Series

These Car Carrier Pylons are used with Miller Century, Champion, Challenger, Holmes, and Vulcan Rollbacks. They fit 10, 12, 15, and 16 Series beds. These deck mounted pylons come in a variety of heights from 38" to 68". Car Carrier Pylons are commonly used as cab protectors. See application chart under the brochures tab. 38" does not have middle bars. 42"-68" has the middle bars.

$1,086.99 – $1,899.99

Jerr-Dan L-Arm Weldment

$192.99

Century and Challenger Underlift Spacer Pad 2nd Stage for Heavy Duty Wreckers

This is a replacement spacer pad for the second stage of the underlift boom on Century and Challenger heavy duty wreckers by Miller Industries. This pad bolts to the underside of the underlift boom. It helps slide the boom in and out efficiently. It also catches on the wear pad mounting bracket of the next stage of the underlift boom to slide that section out. To view specific models this spacer pad fits see Features below. To view the part schematics click on the Brochure tab.

$54.99

Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts

Note: Special Handling Fees Apply for Specific Items

This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.

Option of driver or passenger position
Fits 2" x 3" outer crosstubes
Pivot style receivers
Alloy construction
Scoop style tire pan
4,000-lb. capacity
Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490

Fits:
Century 400 Series
Century 600 Series
Challenger 4700 Series
Challenger 4800 Series

$648.99

Zip's Locking Pin Weldment w/ Chain

This is a Lock Pin Weldment with chain that is used on Vulcan Wreckers. It is used on the crossbar assembly with the wheel retainers. It locks the wheel retainer into the crosstube. This part can be used to replace Part Number, 9046566.

$15.61

Vulcan Front Crosstube 3.5" Stop Pin Assembly

This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par t can be used to replace Part Numbers: 8621400 and 880411500.

$43.09

1 - 60 of 1145 items

Equipment and Trailer Parts