0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Maxxima LED Light Reflector 2 1/2" Round
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
$5.79
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Eagle Wheel Lift Attachment Bronze Bushing
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
$22.41
Howes Lubricator and Penetrating Oil 12 oz.
Howes Lubricator heavy-duty, multi-purpose Lubricator and Penetrating Oil is guaranteed to loosen rusted nuts and bolts. The lubricant can be sprayed on wires, leads and distributor caps and is safe to use on almost any surface.
$16.99
Miller Steel Wheel Lift L-Arm - Century, Holmes and Vulcan Wreckers
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
This painted steel L-Arm from Miller Industries fits the wheel lifts on various models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side. This part can be used to replace Driver Side Part Nos. 12-00803911 and 12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
- Option of driver or passenger position
- Painted steel
- Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
Fits: - 2010 - Current Century Modular Midnight Express
- 2000 - Current Century Midnight Express
- 2007 - Current Century Express 300 Series Modular
- 2009 - Current Holmes 440SL
- 2007 - Current Vulcan Modular 807
- 2000 - Current Vulcan 810 Intruder
$635.99
United Safety Tow Light w/ Case and Female Plug
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
$105.99
Truck Star Back Up Alarm
This self-grounding Back-Up Alarm from Truck Star by Buyers has 97 decibels. It
also comes with 12-24 DC.
$25.79
Amber/Clear Replacement Bulb
Option of amber or clear bulb.The Neutral White, High Intensity 12V, 180 Degree
Illumination Landscape, Park Light, Number, License Plate Light, Trunk Light,
Instrument/Gauge Light, Side Light 35 x Longer Life Time Compared with
Traditional Incandescent Bulbs. Plus Less Heat Output and Extremely Low Power
Consumption.
$2.52
–
$2.85
Zips Pivot Pin Kit Century Express 300 Series
This Pivot Pin Kit so for a Century Express 300 Series Wheel Lift. The kit
includes one 12-0803916 Pivot Pin, one 12-0306748 Pivot Pin Bushing, two
12-0710092 Thrust Washers, two 12-0400637 Pivot Pin Retaining Bolts, two
12-0400428 Lock Nuts and one 80013 Grease Zerk.
$315.99
Zips Pivot Pin Kit Century 301 / 312 Express
Pivot Pin Kit for new style Century 300 series Express wheel lift with recessed
pivot pin top plate.
$264.99
All-Grip Replacement Hook Latch
This is a replacement latch for All-Grip hooks. Be sure to check below for which one fits your hook.
$3.99
–
$45.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Century Wear Pad 3" x 3" Challenger Champion and Vulcan
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
$23.99
Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
$14.19
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Seal Kit for 12-0303911
This is a replacement seal kit for cylinder part number 12-0303911, which is
the crossbar assembly cylinder for the Century EB4 Express.
$62.99
Screw, Heavy Duty Flat Socket, 3/8"-16 x 3/4"
This Heavy Duty Flat Socket Screw has replaced part number 12-0400349. This
screw is used in the assembly of many Miller Industries products, such as:
Century Wheel Lift Boom Assemblies, Crossbar Assemblies, Subframe Assemblies,
and Stage Extension System Assemblies. It is also used on a Holmes 440 SL Wheel
Lift Assembly and a 440 SL Wheel Lift Crossbar Assembly. To see the breakdowns
go to the Brochures tab, open the one of the documents, then search for 0400349
to see the breakdowns.
$0.39
Tork Advanced ShopMax Centerfeed Shop Towels
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
$21.99
Related products
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Lower Parrallel Arm Pin 411 / 412
This is the weldment pin that connects the outer stinger to the parallel arms
on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.
$199.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Lower Parrallel Arm Pin 411 / 412
This is the weldment pin that connects the outer stinger to the parallel arms
on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.
$199.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
