Century

This is a replacement control handle for the new Miller Car Carriers. It is blue in color, and measures 8" long.

This is a replacement control handle for the new Miller Car Carriers. It is Gray in color, and measures 8" long.

This 5 Spool Control Valve from Miller Industries is used on the Hydraulics Assembly of many Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This is a Miller Industries handle assembly for a 5-Spool Control Assembly. See features for what is included in this part#

This is a replacement control handle for the new Miller Car Carriers. It is Red in color, and measures 8" long.

This is a replacement control light used on the LCG Generation 2 Car Carriers.

This is a Miller Industries Decal Plate for the driver side control box hood. It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels all the levers of a 5-spool system.

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0304219, 12-0304190, and 12-0306388.

This is a Miller Industries Decal Plate for the passenger side control box hood. It is designed for all Century/Vulcan Car Carriers prior to 2005 (Excluding LCG). It labels all the levers of a 5-spool system.

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

This Rubber Stop from Miller Industries is used on the boom assembly of Vulcan 810 Intruders, Vulcan 807R and Century 301, 301M, 311 and 312 Wreckers.

This Bronze Bushing from Miller Industries is used on the Inner Boom of the Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has a 3" inner diameter. See the features below for a full list of carriers. This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.

This Slide Pad from Miller Industries is used in the wheel lift, underlift, and tower assemblies of several Century, Challenger, and Holmes wreckers. This slide pad measures 7" long, 3" tall, and 3/8" wide.

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,

Miller Tail Light, Corner Wraparound, RH or LH, Century & Vulcan

This is a Miller Industries license plate light. It is designed to fit any Century or Vulcan LCG Series Car Carrier. Fits into the Tail Light.

This replacement control cable from Miller Industries is for Century and Vulcan Light Duty Wreckers. This is a marine grade cable th at measures 84" long and has a 1" stroke. This cable replaces part numbers: 12-0311724 and 518-1007200.

This T-Handle from Miller Industries is used on the Crosstube and 3-way Pivot Tire Restraint Assembly of Century Formula 6500 600 Series Wreckers, 15 Series 2 and 3 Car Carriers, and Champion Aluminum and Steel Car Carriers. It is also used on the Crosstube Assembly of Century Modular 211 Wreckers. The roll pin used with this T-handle is part number 14795.

This Miller Industries Winch Cable Tie-Back Spring secures your winch cable hook on heavy wreckers. This spring is used on Century units up to 2004. The spring links to the cable hook using an oblong master link #9048800. It measures 13" long and has a diameter of 1-3/4".

This 4 Spool Hydraulic Control Valve from Miller Industries fits on Miller 10 Series Car Carriers (Prior to 2001) and Miller 30 Seri es Car Carriers (2005-Current). It is also used on most twin line Century/Vulcan Wreckers. See the attached brochures for related pa rts data. This part can be used to replace Part Number 12-0303093.

This 6-inch LED light.

This is a Miller Industries Control Handle Knob. It is red in color and is labeled Cable "In/Out" for winch operations. This knob is used on many light duty wreckers as well as car carriers. See Features below to view specific models or click on the Brochure tab to view the part schematics.

This Rubber T Mount from Miller Industries is used on the Subframe Assembly of many Century, Eagle, Holmes, and Vulcan Wreckers. Please see the brochure tab for a full list of breakdowns.

This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 114" long and has a 1" stroke. Please see Features for what models this control cable will fit.

These Miller Industries door hinges are for the toolbox door on the wrecker body. These hinges fit on light duty Century and Challenger wreckers.

This is a Miller Industries Control Box hood for the driver side of any Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool system and is a steel finish.

This is the rear extend cylinder pin for many light duty wreckers by Miller Industries. This pin will work with most Century, Challenger, Champion, Holmes and Vulcan light duty wreckers. This pin measure 6" long with a diamter of 7/8". To view specific wrecker models this pin fits see Features below.

This is a replacement 21" LED Vista Light. This part can be used to replace Part Number 12-0310217.

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

This is a Miller Industries Control Box hood for the passenger side of any Century/Vulcan Car Carrier prior to 2005 (Excluding LCG). It houses a 5-spool system and is a steel finish.

This is an inner & outer tube bearing pad for the wheel lift of a Century or Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each equipped wheel lift. See Features for which years/models they are used on.

This Latch Paddle from Miller Industries comes with a rubber gasket. It is used on the toolbox that is used on the body assembly of several Miller Wreckers. These include Century, Holmes, Eagles and Vulcan Wreckers. Please see the features below for a list of Wreckers, and see the brochure tab for breakdowns.

This Spring from Miller Industries is used on a Crossbar.

Miller Industries' winch loop harness assembly for 17', 16' and 19' Century, Champion and Vulcan carrier beds.

This is a Hose Tray used on 21' bed car carriers by Miller Industries. This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is 2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan. See Features Below to see which models it will fit. This part can be used to replace Part Number 12-0720283. This part will be cut into three sections in all cases for economical shipment.

This Air Cylinder from Miller Industries has a 1.5" Bore and a 1.71" Stroke. This cylinder is used on the assembly of many Century Wreckers, including 11075S/SDU4 Wreckers, 1140/1130/SDU4/LDU Wreckers and 1040B/SDU3 Wreckers. It is also used on the assembly on Challenger 9909 and 8808 Rotators.

This 1-3/16" steel Detent Ball from Miller Industries is used on the assembly of Century Car Carriers and Wreckers.

This is a Miller Industries Control Handle Knob. It is black in color and it is labeled Boom "Up/Down" for the wrecker boom operation. This control knob will work on most light duty wreckers by Miller Industries. To see which specific models this knob will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

This is a Miller Industries Control Handle Knob. It is black in color and is used on a 2005 or older Series car carriers.

This Thrust Washer from Miller Industries has a diameter of 10" and a thickness of 1/8". It is used on many different Miller wrecker assemblies, including, SDU, LDU, Underlift, and Tower assemblies on Century, Challenger, and Holmes wreckers. Please see the brochure tab for a list of breakdowns.

This Super Oilite Bushing from Miller Industries is used on the Wheel Lift Assembly of Century Formula 6500/600 Series Wreckers, Century Formula I Wheel Lift 411/611 Wreckers and Challenger 4700 Series Wreckers. See the attached brochures. This part can be used to replace Part Numbers: 12-0301583, 12-0301845, 12-0301382, and 12-0302093.

This Thrust Washer from Miller Industries has a diameter of 10" and a thickness of 1/16". It is used on many different Miller wrecker assemblies, including, SDU, LDU, Underlift, and Tower assemblies on Century, Challenger, and Holmes wreckers. Please see the brochure tab for a list of breakdowns.

This is a replacement 17 gallon per minute pump used on carriers by Miller Industries. This pump has a 1" shaft and has 15 splines. It also has a 4 bolt flange.

This Miller Industries part is a 7/16" lynch pin for connecting removable rails. It is also used in various other areas.

This Clevis Pin from Miller Industries is used on the lift adapter assembly of Vulcan NV-50 Wrecker and a Century 7035 2-Speed Wrecker. This clevis pin is zinc plated and it measures 5/8" x 6" long. This part replaces part 12-0711002.

This is a Miller Industries Long Control Handle for a Car Carrier. It is the rear outer handle on a 5 spool system.

This Bearing Pad from Miller Industries is used on the outer boom of wheel lift and slide-in tire restraint assemblies of Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for a list of breakdowns.

This is a Miller Industries Long Control Handle for a Car Carrier. It is the rear inner handle on a 5 spool system.

This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2". This sheave is used on the Boom Assembly of many Century, Challenger, Holmes, and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies and parts schematics.

This is a Miller Industriels Long Control Handle for a Car Carrier. It the center handle on a 5 spool system. This part can be used to replace Part Number 12-0801566.

This is a Miller Industries Control Handle Knob. It is black in color and is labeled "In/Out" for boom operations. See Features for related wreckers and Brochures for reference charts.

This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger, Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

Note: Special Handling Fees Apply

This Bed Tilt Cylinder from Miller Industries is designed to withstand the necessary forces and be used at stated pressures. It meets industry and government specifications, so it will prove itself when the job really matters. It is used on the assembly of many Miller Car Carriers, including Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a full list of carriers and see the brochure tab for breakdowns.

• Bore: 3"
• Stroke: 16.25"
• Standard color is black
• Uses Seal Kit 12-0308385
• Uses Cylinder Pin 12-0702434
• Uses Snap Rings 12-0301642
  
  Fits:
• Century 10 Series Carriers
• Century 20 Series Carriers
• Century 30 Series Carriers
• Challenger Car Carriers
• Champion 19'-21' Carriers
• Holmes 10 Series Carriers
• Vulcan 10 Series Carriers
• Vulcan 10 Series Extreme Angle Carriers

This Flush Mount Gauge from Miller Industries goes up to 6,000 PSI.

This is a Bed Pivot Pin from Miller Industries that is used on the bed of car carriers. It measures 38" long and has a diameter of 1-1/4". This Pivot Pin is used in the tilt frame assembly of many Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.

This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.