Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This Plunger T-Handle from Miller Industries comes with a 5/32" x 1" roll pin.
It is used on the Body Assembly and Heavy Duty Truck Hitch Assembly of Century
820 Wreckers and Challenger 6807 Wreckers. See the features below for a list of
wreckers and see the brochure tab for breakdowns.
This 3/16" x 1-3/4" Roll Pin from Miller Industries is used on the Subframe
Assembly of several Miller Century and Challenger Wreckers. When used a roll
pin it is recommended that the hole size be the same as the diameter of the
pin, 3/16" in this case. Please see the features below for a list of trucks and
see the brochure tab for breakdowns.
This roll pin can be used to replace taper pins, straight pins, set screws, rivets, dowel pins, hinge pins, cotter pins and stop pins in many applications. It is also called a spring pin.
Miller Cast Iron D-ring commonly used with small wreckers including Century
311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin
for Installation (Part #BA0259).
Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.
The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series
Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.
This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.
This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and
Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference
charts and Features for related parts and wrecker models this shaft will fit.
This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP
Wrecker by Miller Industries. It will also fit on the Modular Midnight Express.
This boom sheave yoke holds the sheave which helps guide your cable from the
winch to the boom. See Brochures for reference charts and Features for related
parts and models this part will fit.
This is the Boom Sheave Yoke Shaft for Century Midnight Express and Holmes 440
HP Wreckers by Miller Industries. It will also fit the Century Modular Midnight
Express. This is the Shaft that holds the sheave in the boom end yoke. See
Brochures for reference charts and Features for related parts and what models
this shaft will work with.
This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing
cable guides will help guide the winch cable from the boom end back to the
winch without it hanging down and scratching up your boom. This kit consists of
2 boom wings, one measures 27" and the other measures 32" long.
The Revolution Boom Head from In The Ditch is a direct replacement for the
Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This
wire rope guide cover comes off with one hand, allowing for easy wire rope
installation.
This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.
This is the boom end cable guide for many light duty wreckers by Miller
Industries. This cable guide replaces part number 12-0800735. See Brochures for
a reference chart and Features for related parts and wrecker models this cable
guide will fit.
This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2".
This sheave is used on the Boom Assembly of many Century, Challenger, Holmes,
and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies
and parts schematics.
This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 -
Current), and it will also fit on the Modular Midnight Express (2010 - Current)
as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480
Wreckers.
This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes
Light Duty Wreckers by Miller Industries. See Brochures for part schematics and
Features for related parts and to see what models this boom end sheave will
fit.
Miller Cast Iron D-ring commonly used with small wreckers including Century
311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin
for Installation (Part #BA0259).
Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.
The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series
Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.
This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.
This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and
Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference
charts and Features for related parts and wrecker models this shaft will fit.
This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP
Wrecker by Miller Industries. It will also fit on the Modular Midnight Express.
This boom sheave yoke holds the sheave which helps guide your cable from the
winch to the boom. See Brochures for reference charts and Features for related
parts and models this part will fit.
This is the Boom Sheave Yoke Shaft for Century Midnight Express and Holmes 440
HP Wreckers by Miller Industries. It will also fit the Century Modular Midnight
Express. This is the Shaft that holds the sheave in the boom end yoke. See
Brochures for reference charts and Features for related parts and what models
this shaft will work with.
This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing
cable guides will help guide the winch cable from the boom end back to the
winch without it hanging down and scratching up your boom. This kit consists of
2 boom wings, one measures 27" and the other measures 32" long.
The Revolution Boom Head from In The Ditch is a direct replacement for the
Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This
wire rope guide cover comes off with one hand, allowing for easy wire rope
installation.
This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.
This is the boom end cable guide for many light duty wreckers by Miller
Industries. This cable guide replaces part number 12-0800735. See Brochures for
a reference chart and Features for related parts and wrecker models this cable
guide will fit.
This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2".
This sheave is used on the Boom Assembly of many Century, Challenger, Holmes,
and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies
and parts schematics.
This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 -
Current), and it will also fit on the Modular Midnight Express (2010 - Current)
as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480
Wreckers.
This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes
Light Duty Wreckers by Miller Industries. See Brochures for part schematics and
Features for related parts and to see what models this boom end sheave will
fit.