0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Buyers Circuit Breakers Hi-Amp
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
$25.79
–
$41.29
RC Industries M Series Aluminum Toolbox w/Stainless Steel Door
RC Industries Aluminum Toolboxes provide superior security, convenience, and protection for whatever you
want to store. Heavy Duty Aluminum Toolbox.
$692.99
–
$1,717.99
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Buyers Rectangular 1620 Lumens LED Flood Light
This waterproof Flood Light from Buyers Products has 6 white LEDs with a black
powder coated cast aluminum housing. This light is a 12-24 volt system with a
1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable
stainless steel stud mount. The dimensions for this flood light are 5.75" W x
2" T x 3" D and weights around 1.6 lbs.
$41.79
Buyers LED Strip Lighting
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
$16.89
–
$64.99
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
Howes Lubricator and Penetrating Oil 12 oz.
Howes Lubricator heavy-duty, multi-purpose Lubricator and Penetrating Oil is guaranteed to loosen rusted nuts and bolts. The lubricant can be sprayed on wires, leads and distributor caps and is safe to use on almost any surface.
$16.99
B/A Products J Chain 15" J Hook / Grab Hook / Hammerhead Hook G70
These Grade 70 Chain assemblies are 5/16" and include a 15" j-hook at one end
and a grab hook and hammerhead t-j combo hook on the other end. The forged, heat
treated steel has excellent wear and abrasion resistance.
$71.99
–
$79.99
Zip's Toolbox Mount Bracket Galvanized LR-2
These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on
rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car
carrier beds. Sold as a pair.
$127.99
–
$189.99
Zip's Special Toolbox Mounting Bracket LR-5
Note: Special Handling Fees Apply for Specific Items
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.
- 24"X24" or 24"X30"
- Pre drilled holes
- Sturdy steel angle iron
- Sold as each
Available in the following sizes
Item # Size Finish LR-2G 24" x 24" Galvanized LR-5 24" x 24" Powder Coated Black LR-5TG 24" X 30" Tall Galvanized LR-5T 24" X 30" Tall Powder Coated Black
$178.99
–
$240.99
Maxxima 2 1/2" Round Clearance Marker Light w/ Clear Lens and 13 LEDs
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
$7.49
–
$10.59
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Phoenix 12 Position Junction Box
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
$16.19
United Safety Tow Light w/ Case and Female Plug
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
$105.99
TowMate 22" Wireless Lime Tow Light
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
$237.50
Buyers Weld On Grab Hooks
These Weld-On Grab Hooks from Buyers Products are perfect for use with safety
chains. Just weld these hooks on to the back of your wheel grids, or anywhere
else you need an extra hook.
$3.99
–
$8.39
B/A Products Wheel Lift Tie-Down Strap Assembly with D-Ring and Ratchet with Finger Hook
This 84" replacement Tie-Down Strap comes with a Ratchet that has a finger hook
attached to it on one end and a D-Ring attached to the other end. This strap is
yellow and comes with "Zip's" printed into the webbing.
$32.99
Zip's 18" Wide Broom with 60" Fiberglass Handle
This Zip's 18" rough surface broom has a durable fiberglass handle. It sweeps heavy debris such as: gravel, mulch and heavy dirt. This broom effectively cleans rough surfaces. It is for outdoor use under wet or dry conditions.
$38.99
Related products
Century Bearing Pad In / Out Boom LCG
This is an inner & outer tube bearing pad for the wheel lift of a Century or
Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each
equipped wheel lift. See Features for which years/models they are used on.
$18.59
Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan
These are the spacer bars of the wheel lift on many light duty wreckers and a
few medium duty wreckers by Miller Industries. They are located on the top,
inside of the outer stinger and the top, outside of the inner stinger. These
spacer bars will fit the following wreckers: Century Modular Express 300
Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes
440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder,
Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold
separately.
$23.09
Chevron Wear Pad 1/2" x 2" x 3" Nylatron
This is an inner tube slide pad for the top side of the auto-grip wheel lift
option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad
sold separately.
$16.89
Miller Wear Pad Wheel Lift Inner Stinger Century 300 Series and Vulcan 800 Series
This is a wheel lift wear pad for the outside, top of the inner stinger on
Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on
the Century Express Modular 300 Series Wreckers by Miller Industries. See
Features for related parts and Brochures for reference charts.
$15.39
Century Bearing Pad 6 3/8" x 4" x 3/8"
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
$43.99
Zips Wheel Lift Wear Pad Kit Vulcan 880 / 890
Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit
includes (1)
$79.99
Mobile Lifts Wheel Lift Wear Pad Jerr-Dan HPL35 and HPL60
This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The
dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used
on the Jerr-Dan HPL-30 and HPL-60 Wreckers.
$12.19
Century Slider Pad 3" x 2 3/8" x 3/16"
This Slider Pad from Miller Industries is an inner tube slide pad for the
bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and
Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and
3/16" wide. Please see the brochure tab for a full list of breakdowns.
$10.89
Jerr-Dan Replacement Bed Lock Wear Pad
Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with
one of these new blocks.
$8.69
Century Wear Pad 3" x 3" Challenger Champion and Vulcan
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
$23.99
Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
$10.59
Century Slide Pad 7" x 3" x 3/8"
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
$17.79
Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
$14.19
Miller Bearing Pad Kit Steel 21' Prior '10
Note: Special Handling Fees Apply
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
- (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
- (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
- (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
- (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
- (44) 12-0400367 1/4-20 Nylon Lock Nuts
- (44) 12-0403009 1/4-20x1" Hold Down Screws
- (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws
$561.99
Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL
This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century
211/300 Series, and Holmes 440SL by Miller Industries. They are located on the
top, inside of the outer stinger. See Brochures for reference chart.
$41.99
Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
$21.19
Century Bearing Pad In / Out Boom LCG
This is an inner & outer tube bearing pad for the wheel lift of a Century or
Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each
equipped wheel lift. See Features for which years/models they are used on.
$18.59
Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan
These are the spacer bars of the wheel lift on many light duty wreckers and a
few medium duty wreckers by Miller Industries. They are located on the top,
inside of the outer stinger and the top, outside of the inner stinger. These
spacer bars will fit the following wreckers: Century Modular Express 300
Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes
440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder,
Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold
separately.
$23.09
Chevron Wear Pad 1/2" x 2" x 3" Nylatron
This is an inner tube slide pad for the top side of the auto-grip wheel lift
option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad
sold separately.
$16.89
Miller Wear Pad Wheel Lift Inner Stinger Century 300 Series and Vulcan 800 Series
This is a wheel lift wear pad for the outside, top of the inner stinger on
Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on
the Century Express Modular 300 Series Wreckers by Miller Industries. See
Features for related parts and Brochures for reference charts.
$15.39
Century Bearing Pad 6 3/8" x 4" x 3/8"
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
$43.99
Zips Wheel Lift Wear Pad Kit Vulcan 880 / 890
Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit
includes (1)
$79.99
Mobile Lifts Wheel Lift Wear Pad Jerr-Dan HPL35 and HPL60
This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The
dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used
on the Jerr-Dan HPL-30 and HPL-60 Wreckers.
$12.19
Century Slider Pad 3" x 2 3/8" x 3/16"
This Slider Pad from Miller Industries is an inner tube slide pad for the
bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and
Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and
3/16" wide. Please see the brochure tab for a full list of breakdowns.
$10.89
Jerr-Dan Replacement Bed Lock Wear Pad
Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with
one of these new blocks.
$8.69
Century Wear Pad 3" x 3" Challenger Champion and Vulcan
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
$23.99
Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
$10.59
Century Slide Pad 7" x 3" x 3/8"
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
$17.79
Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
$14.19
Miller Bearing Pad Kit Steel 21' Prior '10
Note: Special Handling Fees Apply
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
- (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
- (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
- (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
- (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
- (44) 12-0400367 1/4-20 Nylon Lock Nuts
- (44) 12-0403009 1/4-20x1" Hold Down Screws
- (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws
$561.99
Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL
This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century
211/300 Series, and Holmes 440SL by Miller Industries. They are located on the
top, inside of the outer stinger. See Brochures for reference chart.
$41.99
Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
$21.19
