Mobile Office Vehicle Mounts

The TekGrip Dash Mount gives you options of either viewing portrait or landscape. You can easily remove the mount and re-attach anywhere you would like to. The suction cup is made of a sticky temporbond material, allowing you to stick the mount on textured surfaces.

The TekGrip Power Dock by Bracketron creates a hands-free option for drivers. You can charge your smartphone or other electronic devices through the USB output. The TekGrip Power Dock offers two outputs that allow you to charge two devices at the same time.

The Seat Organizer create the perfect solution for storing small essential duty gear or files that can be easily reach. The Portable design allows the organizer to move from the car to desk to home.

The Seat Organizer create the perfect solution for storing small essential duty gear or files that can be easily reach. The Portable design allows the organizer to move from the car to desk to home. CB50A and CB50B both have adjustable steel brackets that loop over the back of a seat and carrying handle for portability. Made of i mpact-resistant ABS plastic.

The RAM-B-138U consists of a medium length B size 1" double socket arm, one 2.5" diameter round ball base, and one diamond ball base (both bases feature the universal AMPS hole pattern). The ball and socket system provides shock and vibration damping, and allows for near-infinite adjustability to achieve an ideal viewing and operating angle of your device.

Extend your holder from car mount! This Block Spacer will extend your device holder/mount 19 mm/ 0.75 inch from the car mount. Screws for attaching the Block Spacer to the car mount are enclosed.

This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

This universal adjustable ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Once the holder is adjusted for the right size it will allow you to easily insert and remove the device with our spring action corner. With this tablet holder you can use your tablet in landscape or portrait view, and easily rotate between the two positions. You can also angle/tilt the tablet 15 degrees for better viewing and to avoid glare.

The TAB801 car or truck seat rail tablet mount can be used with all large tablets 7 to 18.4 inches in screen size, including Samsung Tab A7 Lite, Samsung Tab A7, Samsung Tab A 8.0, Tab A 8.4 , Tab A 10.1 , Galaxy Tab S7 11 and 12.4, Galaxy Tab S6 and S5, Apple iPad Pro 10.5 , 11 and 12.9 , iPad 9th Generation, iPad Mini 6th Generation, iPad Air 4th Generation, Lenovo Tab M7, M8 and M10, Joy TAB, and LG G Pad 5. This mount includes Arkon s Slim-Grip Universal Tablet Holder and Heavy-Duty Aluminum Seat Rail Mounting Pedestal with 22-inch Adjustable Arm. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet to be inserted at the top and bottom of the holder. The support legs can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel. The aluminum car seat rail mount features three adjustment points and is ideal for those who prefer mounting their tablet somewhere other than the windshield or dash. Use a socket wrench to install the mount to the car s seat rail. Bend the 22-inch adjustable arm for exact positioning of the tablet.

This universal drill-down laptop kit installs quickly and easily into most vehicles by using self tapping screws, or by drilling and then bolting down the mount base to the vehicle*. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray.

The RAP-299-3-UN8U consists of the RAM-A-CAN cup holder base, double socket system and universal spring loaded X-Grip? cradle for 7"-8" tablets. The cup holder base includes a 6" flex mounting feature. A durable composite shell construction and soft fins that can be trimmed to fit makes the cup holder mount one of the most portable and versatile Go Anywhere products offered. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip? cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your tablet. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip? is the cell phone cradle evolved.

The RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill? vehicle base, 18 rigid aluminum rod, socket system and universal X-Grip? clamping cradle for 10" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip? clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip? clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip?.

The RAM-B-166-UN9U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip clamping cradle for 7"- 10" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip clamping cradle expands and contracts for perfect fit of most 7"-10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip. The X-Grip cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Get the most out of your tablet with the RAM Tab-Tite universal clamping cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.

Ideal for vehicle windshields, the RAP-B-166-UN7U consists of a 3.3" diameter RAM Twist-Lock suction cup base, medium length double socket arm, and the popular spring-loaded RAM X-Grip phone holder. The RAM X-Grip features an 'X' design that expands and contracts to provide a perfect fit for your device - even if it's in a case. Made of high-strength composite and stainless steel, this version of the RAM X-Grip fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. RAM ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle - while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM X-Grip includes a device tether that is recommended for added security and peace of mind.

This RAM? No-Drill laptop stand system installs quickly and easily into a variety of Ford F-Series and Ford Excursion vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 . Dual swing arms provide articulation and 12 of reach for passenger and driver access to the mounted device. RAM? rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM? Tough-Tray laptop holder accommodates 10 to 16 wide laptops, and 17 wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM? Tough-Tray . In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM? mounting solutions.

The RAM-B-166-UN8U consists of a 3.3" diameter RAM? Twist-Lock suction cup base, medium length double socket arm, and the popular spring-loaded RAM? X-Grip? 7"-8" tablet holder. The RAM? X-Grip? features an 'X' design that expands and contracts to provide a perfect fit for your device - even if it's in a case. Included are easy access grip knobs located on the back of the cradle for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM? X-Grip? with, RAM? ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle - while also extending the life of your phone by providing shock and vibration damping. The RAM? X-Grip? tablet holder includes a device tether recommended for added security and peace of mind. This version of the RAM? X-Grip? holder is compatible with tablets that will fit the dimensions listed below. It is important to verify the dimensions of device with its case, sleeve, or skin when determining the overall size.

The RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal RAM? X-Grip? clamping cradle for 10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM? X-Grip? clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM? X-Grip? clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the RAM? X-Grip?.

The RAM? No-Drill RAM-B-316-1-202U vehicle mount consists of the RAM? POD I base, 18 rigid aluminum rod, B Size 1" ball socket arm, and a round ball plate. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device an ideal viewing and operating angle. The 2.5" diameter round base adapter contains the universal AMPS hole pattern. For proper fit, make sure your vehicle has an appropriate bolt to mount the base securely. The RAM-B-316-1-202U is not compatible with 2014 and newer Chevrolet seats that have the seat hook system.

The Trucker Tough Gear Rack is a unique electronics mounting system for big rigs, delivery and pick-up trucks. Our Gear Rack has an 18 inch bar with two device holder arms, a magnetic phone holder, and a GPS holder with adapter brackets for Rand McNally, TomTom/Magellan and Garmin GPS devices. The bar is flexible and will contour to almost any dash. The Gear Rack even has the ability to go around a corner. Simply the best mounting solution for anyone out there driving a truck.

This RAM? No-Drill laptop stand system installs quickly and easily into a variety of Chevrolet and GMC vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 . Dual swing arms provide articulation and 12 of reach for passenger and driver access to the mounted device. RAM? rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM? Tough-Tray laptop holder accommodates 10 to 16 wide laptops, and 17 wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM? Tough-Tray . In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM? mounting solutions.

The RAM-B-316-1-238U consists of the RAM POD I universal No-Drill vehicle base,18 rigid aluminum rod, single 1" ball socket arm and diamond base adapter. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The RAM POD I will hold everything you need safely and securely. The diamond adapter base consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.

Ideal for vehicle windshields, the RAM-B-166-UN7U consists of a 3.3" diameter RAM? Twist-Lock suction cup base, medium length double socket arm, and the popular spring-loaded RAM? X-Grip? phone holder. The RAM? X-Grip? features an 'X' design that expands and contracts to provide a perfect fit for your device - even if it's in a case. Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite, this version of the RAM? X-Grip? fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. RAM? ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle - while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM? X-Grip? includes a device tether that is recommended for added security and peace of mind.

This kit includes the RAM-234-6 with the RAM POD I with a 1.5" diamter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM-POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt.

The RAM-B-201U consists of a medium double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 3.73", this is the standard RAM? double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.