Hydraulic Char-Lynn Winch Motor, Ramsey H-800 Winch

Chevron Pin and Link Assembly

This Pin and Link Assembly from Miller Industries is used on the Control Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30 Series Car Carriers. Please see the features below for a list of trucks and see the brochure tab for breakdowns.

$33.99

Bit, Drill 3/16"

This is a replacement 3/16" drill bit.

$2.42

Miller 6.5" Thrust Washer Century / Challenger / Holmes

This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many different Miller Wrecker assemblies. These assemblies include the boom, wheel lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes Wreckers. Please see the brochure for a full list of breakdowns.

$12.99

Miller Inner Boom Bushing

This Bronze Bushing from Miller Industries is used on the Inner Boom of the Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has a 3" inner diameter. See the features below for a full list of carriers. This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.

$86.99

Jerr-Dan Decal Control 5 Pos IRL

$9.29 – $11.59

Handle Bracket

This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve assembly itself and is use to hold the control rod linkage to the valve.

$39.99

Composite Clevis, Right

Right hand thread composite clevis used on Chevrons.

$7.99

Ramsey Seal Kit

This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.

$73.99

Cable Tie, Black, 11.1"

Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie. Cable ties secure wire bundles, harnesses and components quickly without slipping. Sold Each (Individually)

$0.19

Miller Grommet, Rubber, Century and Vulcan Wreckers

This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.

$2.99

Cable Tie, Black, 7.6"

This is a 7.6" Black Cable Tie. Sold as Each.

$0.19

Washer, Flat 5/16" Stainless Steel 18-8

Fastenal 5/16" 18-8 stainless steel small OD flat washer.

$0.09

Nylon Air Brake Tubing, 3/8" O.D.

Velvac nylon air brake tubing.

$1.17

Nylonck Nut, 3/8-16, Stainless Steel

$0.39

Air Line 1/4"

This nylon air line is used for air brake systems.

$0.70

Miller Composite Bell Crank

This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car Carriers. These carriers are made in 2014 or later. Please see the brochure tab for a list of breakdowns.

$13.29

Chevron Pin and Link Assembly

This Pin and Link Assembly from Miller Industries is used on the Control Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30 Series Car Carriers. Please see the features below for a list of trucks and see the brochure tab for breakdowns.

$33.99

Bit, Drill 3/16"

This is a replacement 3/16" drill bit.

$2.42

Miller 6.5" Thrust Washer Century / Challenger / Holmes

This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many different Miller Wrecker assemblies. These assemblies include the boom, wheel lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes Wreckers. Please see the brochure for a full list of breakdowns.

$12.99

Miller Inner Boom Bushing

This Bronze Bushing from Miller Industries is used on the Inner Boom of the Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has a 3" inner diameter. See the features below for a full list of carriers. This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.

$86.99

Jerr-Dan Decal Control 5 Pos IRL

$9.29 – $11.59

Handle Bracket

This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve assembly itself and is use to hold the control rod linkage to the valve.

$39.99

Composite Clevis, Right

Right hand thread composite clevis used on Chevrons.

$7.99

Ramsey Seal Kit

This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.

$73.99

Cable Tie, Black, 11.1"

Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie. Cable ties secure wire bundles, harnesses and components quickly without slipping. Sold Each (Individually)

$0.19

Miller Grommet, Rubber, Century and Vulcan Wreckers

This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.

$2.99

Cable Tie, Black, 7.6"

This is a 7.6" Black Cable Tie. Sold as Each.

$0.19

Washer, Flat 5/16" Stainless Steel 18-8

Fastenal 5/16" 18-8 stainless steel small OD flat washer.

$0.09

Nylon Air Brake Tubing, 3/8" O.D.

Velvac nylon air brake tubing.

$1.17

Nylonck Nut, 3/8-16, Stainless Steel

$0.39

Air Line 1/4"

This nylon air line is used for air brake systems.

$0.70

Miller Composite Bell Crank

This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car Carriers. These carriers are made in 2014 or later. Please see the brochure tab for a list of breakdowns.

$13.29