Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Option of amber or clear bulb.The Neutral White, High Intensity 12V, 180 Degree
Illumination Landscape, Park Light, Number, License Plate Light, Trunk Light,
Instrument/Gauge Light, Side Light 35 x Longer Life Time Compared with
Traditional Incandescent Bulbs. Plus Less Heat Output and Extremely Low Power
Consumption.
This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
This Button Head Screw from Miller Industries is used to screw the stop plates
and slide pads onto boom weldments in many Miller Wrecker assemblies. These
assemblies include wheel lift, SDU, underlift, and tower assemblies on Century,
Challenger, and Holmes wreckers. The screw measures 3/8" diameter x 5/8" long
with a thread size of 24. Please see the brochure tab for a list of breakdowns.
This Stop Plate from Miller Industries is used in the assembly of wheel lifts, SDU, underlifts, and towers for many Miller car carriers and wreckers. Those include Century wreckers, Challenger wreckers, and Challenger, Champion, Holmes and Vulcan car carriers. This stop plate measures 2-5/8" long, 1" tall, and 5/8" wide. Please see the brochure tab for a list of breakdowns This part can be used to replace Part Number HD-106.
This is a replacement wear pad used in the recovery boom assembly of heavy duty
wreckers by Miller Industries. This wear pad is used in between the second and
third stages of the wrecker boom and helps prevent damage to the boom
weldments. This wear pad measures 3/4" x 1" x 4". To view the models this pad
will fit see Features below. To view the part schematics click on the Brochure
tab above.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.