Jerr-Dan sheave and bearing assembly

Fiber Core Cable offers greater flexibility, less wear on the sheave wheels, and provides a lubricant reservoir. When pressure is exerted on the working cable, the core gives off lubricant to minimize the wear of wire on wire - assuring longer service life.

Snatch blocks from SafeAll work great for a variety of applications. They consist of a single pulley or sheave protected by two outer teardrop-shaped side plates. A release pin with a cotter key sandwiches the plates together over the pulley. Remove both to access the inner pulley and insert the winch line.

Make the time it takes to winch a wreck shorter with the All-Grip Snatch Blocks with a Chain and Grab Hook. With its 30” chain, this assembly offers an easy attachment point. Plus, it makes it easier to adjust the direction of the winch without having to adjust your truck.

Winch Cables can also be known as: winch line, wire rope, wrecker cables, car carrier cables, and rollback cables. These All-Grip Fiber Core Winch Cables are superior to most other winch cables found in the marketplace due to the hand splice and swage sleeve (Flemish eye) end terminations. Each eye is protected by a steel liner (thimble) to guard against premature bearing point eye wear. Each winch cable is supplied with a Drop Forged Eye Hook on one end. Spring loaded safety latches are standard equipment on these winch cables. All winch lines are right Regular lay. Fiber core winch cables offer greater flexibility, less wear on the sheave wheels, and provide a lubricant reservoir. When pressure is exerted on the working winch cable, the core gives off lubricant to minimize the wear of wire on wire - assuring longer service life. Each winch line is packaged in a heavy duty box (larger winch lines are also supplied on reels) which makes handling and shipping by UPS very convenient.

Winch Cables can also be known as: winch line, wire rope, wrecker cables, car carrier cables, and rollback cables. These All-Grip Fiber Core Winch Cables are superior to most other winch cables found in the marketplace due to the hand splice and swage sleeve (Flemish eye) end terminations. Each eye is protected by a steel liner (thimble) to guard against premature bearing point eye wear. Each winch cable is supplied with a Drop Forged Eye Hook on one end. Spring loaded safety latches are standard equipment on these winch cables. All winch lines are right Regular lay. Fiber core winch cables offer greater flexibility, less wear on the sheave wheels, and provide a lubricant reservoir. When pressure is exerted on the working winch cable, the core gives off lubricant to minimize the wear of wire on wire - assuring longer service life. Each winch line is packaged in a heavy duty box (larger winch lines are also supplied on reels) which makes handling and shipping by UPS very convenient.

The Green Pin Snatch Block HK is a light-weight snatch block type 601HK with a hook attached. The snatch block has a smooth, uninterrupted pull due to the conical roller bearings. The coating of the Green Pin Snatch Block HK ensures long-term durability, even under harsh conditions. It is available in a range with a working load limit from 2 up to 15 ton.

This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.

Sheave weldment for swivel head assembly.

This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2". This sheave is used on the Boom Assembly of many Century, Challenger, Holmes, and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies and parts schematics.

The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.

This Sheave Casting from Miller Industries is used in the Boom Swivel Assembly of Century, Holmes, and Vulcan Wreckers. This pulley measures 6" in diameter, 1" wide, and it has a 1" diameter hole. Please see the brochure tab for a list of breakdowns. This part can be used to replace Part Numbers: 9050504 and 7766200.

This 12" Sheave from Miller Industries is used on the Extension System and Boom Assembly of several Miller Wreckers. These include Century, Challenger and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This part number has been replaced by part number

This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP Wrecker by Miller Industries. It will also fit on the Modular Midnight Express. This boom sheave yoke holds the sheave which helps guide your cable from the winch to the boom. See Brochures for reference charts and Features for related parts and models this part will fit.

This is a replacement sheave shaft weldment for the Holmes 750.

This is a Boom End Assembly for Century Wreckers by Miller Industries. This boom end will fit the EB4 Express, EB4 6500, Formula 6500 - 600 Series, 614 with a Formula IIT. See Brochures for part schematics and Features to see what models this boom end fits.

This Boom End Swivel Weldment from Miller Industries is used on the Boom Swivel Assembly of Century and Challenger Heavy Duty Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Numbers: 12-0800509 and 12-0800510.