Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Replacement parts for your medium- or heavy-duty wrecker are available from Zip’s AW Direct. We stock lights, cylinders, control valve bodies, cable guides and other essential products to repair your unit and keep it operating as it should for many years to come. Drill down on any of the links on the left to find the specific part you’re looking for.
This is a replacement cable guide bottom assembly for heavy duty wreckers by Miller Industries. This bottom assembly will fit Century 1040S, 1060S, 1075S, 1130/1140, 9055, Challenger 6807/T-50, CH-45, 9909/8808 Rotators, and Vulcan V-100.
The Omnex 10/14 function remote comes standard with 14 functions programmed. This Omnex remote control for wireless Omnex remote systems is commonly used on heavy duty wreckers and can be used on multiple applications up to 14 functions.
This is a replacement LED tail light retro fit kit by Zip's Truck Equipment. This is a retro fit kit that works on heavy duty wreckers. This kit includes 2 stainless steel tail light brackets, 4 LED red 6" Stop Turn Tail lights, 2 LED white 6" back up lights, 6 oval grommets, 6 3-wire pigtails, 2 LED red 2" round marker lights, 2 black 2" round grommets, and 2 2-wire pigtails.
This welded link is commonly used in conjunction with the cable tie-back springs on Miller Century, Vulcan and Challenger Heavy Duty Wreckers See part numbers:
This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 114" long and has a 1" stroke. Please see Features for what models this control cable will fit.
This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.
This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 104" long with a 2" stroke. This cable goes between the hydraulic control levers and the valve body. Please see Features for what models this control cable will fit.
This LED Side Light from Miller Industries is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light. It will also function as a marker light and flasher light when used with a Flasher Control Power Unit (not included).
38" Extreme 3" Aluminum Aero Dynamic Pylon. Does Not Include Wrapper or Whelen H700 LED Side Lights. This pylon does include 3 marker lights and 2 stop tail turn lights.
This is a replacement retainer pin assembly for the Century 3224 medium duty wrecker by Miller Industries. This pin is used to hold on the fork adapters on to the wheel lift crossbar.
This LED Side Lamp from Miller Industries can be used in place of the docking light 124002717 for wheel area and side applications. The side lamp is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light.
This Left Side Swivel Weldment from Miller Industries is used on the Boom Swivel Assembly of several Miller Wreckers. These include Century, Challenger and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.
This Outrigger Blade from Miller Industries is a Wheel Lift Attachments. It is used on the assembly of Century, Challenger and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.
This is a replacement 5 Spool Parker Control Valve for the Vulcan 810 Auto-Load and the Century Modular Midnight Express light duty wreckers by Miller Industries. To view part schematics please click on the brochure tab above. This part can be used to replace part number 12-0306776.
This is a color control handle kit by Miller Industries. This kit includes enough colored handles to do both sides of a large unit from a 4024 through a 6-winch rotator.
This is Jack Up and Down Control Knob from Miller Industries. It is used on Control Assemblies of many Miller Wreckers that use a Jack control. These wreckers include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.
This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 96" long. Please see Features for what models this control cable will fit.
This is a Boom Lock Kit for a Holmes 600 & 750 Wrecker. This Pin is used to hold the 2 booms together. You can pull this pin to unlock the 2 booms and rotate the booms to the side if you have a side pull situation. This kit includes a plunger pin, spring, and pull grip handle assembly.
Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar). This New Tire Lift (124002808) Will Include The Upgraded Crossbar (124002838) When Ordered On With A New Wrecker Unit.
This is a replacement boom lift cylinder lower pin for the Century 1130/1140, 7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.
Zip's Custom Hydraulic Rear Stiff Leg Kit. Designed for add-on installation on 12 ton or smaller light wreckers. Will fit on either conventional or self-loading small wreckers. Zip's custom legs features a compact design with an extra wide flipper foot. The kit includes hydraulic legs, flipper foot, built in tie-back anchor, low pull D-ring, electric control valve, wired lanyard controller. *Mid-Leg D-ring is available but NOT included in kit.
Miller Industries Mounting Pin for the Heavy Duty D-Ring (Part #12-0719585) Used On Century, Vulcan, & Challenger Integrated and Rotator Heavy Duty Wreckers.
This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Vulcan 896 and 897 medium-duty wreckers. Also known as a tire restraint or wheel retainer, this adjustable 2" x 3" L-Arm fits the outer crosstube (Part No. 12-4008002). This adjustable L-Arm offers a capacity of 6,000 lbs. as a pair and is angled in and down more for clearance on smaller vehicles.
This is a replacement boom lift cylinder lower pin on Century and Challenger Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the base end of the cylinder and attaches the lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.
This is a replacement LED tail light retro fit kit by Zip's Truck Equipment. This is a retro fit kit that works on heavy duty wreckers. This kit includes 2 stainless steel tail light brackets, 4 LED red 6" Stop Turn Tail lights, 2 oval grommets, 4 3-wire pigtails, 2 LED red 2" round marker lights, 2 black 2" round grommets, and 2 2-wire pigtails, along with 4 reflective rectangular red decals.
This Miller replacement grader blade is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055.
This is a replacement boom lift cylinder pin for the Century 3212 heavy duty integrated wrecker by Miller Industries. This pin attaches the lift cylinder to the main recovery boom outer weldment. To view the part schematics, see the Brochure tab.
Miller Industries D-Ring for Heavy Duty Wreckers. Designed for use with Century, Vulcan, & Challenger Heavy Duty Integrated and Rotator Wreckers. Requires But Does Not Include Mounting Pin (Part #GA0215). This part can be used to replace Part Number MM12B.
Holmes Heavy-Duty D-Ring, Cast Iron. Typically used on Holmes 850's and 750's and some of the larger Century hydraulic wreckers. Requires Mounting Pin (Part #MM-8B) - Not Included.
This 3 Spool Control Valve from Miller Industries is used on the Hydraulics Assemblies of several Heavy Duty Wreckers. These include Century and Challenger Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.
3 Function Remote Control, easy grip plastic housing, 12' of cord from connector plug to controller, 3weather proof toggle switches. Designed to be used on Zacklifts but can be used on other applications.
This is a replacement shaft that attaches the boom end sheave to the boom end swivel weldment on Century and Challenger heavy duty wreckers by Miller Industries. This is the shaft the sheave spins on while the winch cable goes in or out. To see which models this shaft fits see Features below. To view the part schematics click on the Brochure tab.
These are bolt on aluminum tube pylon wings for heavy duty aluminum tube pylons by Miller Industries. These new style wings are designed to replace the composite pylon wings. They bolt to the side of your aluminum pylon and provide a nice, clean mounting platform for additional lights. Sold as a set which includes both the left and right wings.
This Boom Elevation Cylinder from Miller Industries is used on the Hydraulic Cylinders Assembly of Century 5025 and 5030 Wreckers. It is also used on the Hydraulic Cylinders Assembly of Challenger CH-30T/CH-30T3 Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.
This Miller replacement grader blade set is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055. Kit includes 2 blades and mounting hardware.
This is a replacement boom lift cylinder upper pivot pin for the Century 7035, 9055, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.
This is a replacement Parker 4 spool valve for heavy duty wreckers by Miller Industries. This 4 function valve works with most Century and Challenger medium and heavy duty wreckers. Common uses for this valve are to run your winch function, recovery boom function, and rear spade function. To view which specific models this valve will work with please see Features below. To view part schematics click on the Brochure tab above.
Holmes Mounting Pin for the Heavy Duty D-Ring on 750 & 850 Wreckers. Designed to be used with D-Ring (Part #MM-12B). Cold rolled shaft with Dimensions of 8 1/2" x 1 3/8".
These are a pair of Whelen Micro-Edge Pod LED lights through Miller Industries. These lights are sold as a pair and include mounting brackets. These pod lights measure 10" x 8". These lights feature a 2 head amber LED's with a clear lens.
The "Ground Penetrating Plate" Is Designed To Be Used On Front Foot of Rotators or XPs, and On The Rear Spades Of Century Integrated and HD Fixed-Boom Units. The Sole Purpose Of The Single Pad Is To Dig Into Asphalt, Ice, Etc. Field Testing Has Proven It To Be A Valuable Tool In These Conditions.