1 1/4 Nom Int. Ret Ring

Miller Steel Wheel Lift L-Arm - Century 3212 and Holmes 600R HD Wreckers

This zinc-plated mild steel L-Arm from Miller Industries fits the wheel lifts on Century 3212 and Holmes 600R heavy-duty wreckers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm fits the crosstubes on your choice of the driver or passenger side. The driver side (12-0803641) part can be used to replace Part No. (12-0904186). The passenger side (12-0803642) can be used to replace Part No. (12-0904187).

$328.99

Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

$10.59

Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan

These are the spacer bars of the wheel lift on many light duty wreckers and a few medium duty wreckers by Miller Industries. They are located on the top, inside of the outer stinger and the top, outside of the inner stinger. These spacer bars will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold separately.

$23.09

Miller Under Lift Extend Rod Pin

This is a replacement under lift extend rod pin from Miller.

$27.49

Crossbar Positioning Plate, For Century 3212,Holmes 600R and Vulcan V30 Wreckers

This crossbar positioning plate fits Century 3212, Holmes 600R and Vulcan V30 heavy duty wreckers.

$50.99

Miller Pin Weldment, Crossbar Pivot, Century and Vulcan

The Crossbar Pivot Pin Weldment from Miller Industries is used on the Underlift Assembly of Century 3212, Vulcan V30 and Holmes 600R Wreckers. This Pin has actually replaced part number 3012-801100, which was used on the Century 3212 and Vulcan V30 Wreckers. Please see the brochure tab for breakdown schematics.

$237.99

Fastenal 1/4" - 28 Grease Fitting w/ Ball Check

This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number

$0.29

Miller Crossbar Pivot Pin for Gen II Crossbar

This is a replacement Pivot Pin for the Gen II Crossbar by Miller Industries.

$257.99

Vulcan External Retaining Ring, 1-1/4"

1-1/4" External retaining ring that is used with the extend cylinder pin (

$3.59

WASHER, HEAVY LOCK 3/8

This part can be used to replace Part Number, 12-0400482.

$0.19

Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL

This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century 211/300 Series, and Holmes 440SL by Miller Industries. They are located on the top, inside of the outer stinger. See Brochures for reference chart.

$41.99

Miller Boom Lift Cylinder Pin Century 3212 HD Wrecker

This is a replacement boom lift cylinder pin for the Century 3212 heavy duty integrated wrecker by Miller Industries. This pin attaches the lift cylinder to the main recovery boom outer weldment. To view the part schematics, see the Brochure tab.

$90.99

Miller Detent Spring

This Detent Spring from Miller Industries is used in the assembly of crossbars, outer crosstubes, underlifts, wheel lifts, and crossbeams of many different car carriers and wreckers. These include Century, Holmes, and Vulcan Wreckers, as well as, a Vulcan Car Carrier. See the brochures tab for a complete list and part breakdowns.

$23.99

Miller 1" Chrome Ball

This 1" Chrome Ball from Miller Industries is used on many assembly applications, including crossbar, outer crosstube, underlift, wheel lift, and crossbeam assembly. These assemblies are for Century, Holmes, and Vulcan Car Carriers, as well as Vulcan Wreckers. See the brochure tab for a full list of assemblies and part schematics.

$14.69

Washer, Flat, 3/8"

This General Purpose Flat Washer can be used on most Miller Carrier and Wrecker assemblies, including Century, Challenger, Champion, Eagles, Holmes, and Vulcan. Flat washers are typically used under the head of a bolt of nut to distribute the forces applied when tightening. The zinc plating greatly decreases the corrosion rate. Please refer to the Parts Schematics page for lists of breakdowns. This part can be used to replace Part Number 12-0400480.

$0.09

Miller Retaining Ring, 1-1/2"

This 1-1/2" Retaining Ring from Miller Industries is used on many different assemblies including boom, Subframe, recovery boom, wheel lift boom, underlift, dual and single winch extendable boom, and dual and single winch non-extendable boom assemblies. These assemblies can be found on many Century, Challenger, Champion, Eagle, Holmes, and Vulcan Wreckers. See the brochures tab for a full list of assemblies and part schematics.

$7.49

Century 3212 Holmes 60R and Vulcan V30 Wreckers Crossbar Die Spring Spacer

Miller Industreis crossbar die spring spacer for HD wreckers. Click on the brochure tab to see the part schematic of this item.

$10.59

Miller Boom Extend Cylinder Front Pin Century 3212 and Vulcan V30

This is a replacement boom extend cylinder pin for the Century 3212 and Vulcan V30 heavy duty integrated wreckers by Miller Industries. This pin is used on the base end of the cylinder and attaches the boom extend cylinder to the outer boom weldment. This is the boom extend cylinder pin that is towards the front of the wrecker. To view the models this wrecker fits, see Features below. To view the part schematics, see the Brochure tab.

$204.99

Miller Crossbar Weldment - 3012, 3014

$2,026.99

Washer, Split Lock, 3/8"

Split Lock Washers provide a positive locking action. The spring like take-up compensates for loosening caused by slight material wear. This split lock washer has a size of 3/8" and a thickness of .094".

$5.49