3/8-16 Nylok Hex Nut Zinc

In stock

Price: $5.49

SKU: 12-0400392

Qty:

View Cart

Qualifies for Free Shipping
with $199.00 minimum order

Description

This is a 3/8-16 nylok hex nut zinc.

Product Dimensions: 0.25"L x 0.28"W x 0.16"L
Inside Diameter: 0.11"

Related Schematics

Customers who bought this item also bought

Miller Socket Set Screw 3/8" -16 x 1-1/2"

This Socket Set Screw is made from alloy steel with a black oxide finish. It is REACH and RoHS compliant. This screw is used on the Wheel Lift and Crossbeam Assembly of Champion Carriers prior to 2001 and Vulcan 10 Series Carriers from 2003-2005.

$0.69

Miller Screw 3/8 x 2 1/2 Winch Clutch Control

This Screw from Miller Industries is used in the Winch Clutch Control assembly of several Miller car Carriers. These include Century, Champion, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.

$5.49

Miller Bottom Cable Guide Heavy Duty Wreckers

This is a replacement cable guide bottom assembly for heavy duty wreckers by Miller Industries. This bottom assembly will fit Century 1040S, 1060S, 1075S, 1130/1140, 9055, Challenger 6807/T-50, CH-45, 9909/8808 Rotators, and Vulcan V-100.

$31.99

Bolt, 3/8" X 3"

This part can be used to replace Part Number 12-0400124.

$5.49

Miller Bottom Cable Guide

This Bottom Cable Guide from Miller Industries is used on the Boom Assembly of many Century, Challenger, and Holmes Wreckers. Please see the brochures tab for a full list of Wreckers and parts schematics.

$21.99

Washer, Flat, 3/8"

This General Purpose Flat Washer can be used on most Miller Carrier and Wrecker assemblies, including Century, Challenger, Champion, Eagles, Holmes, and Vulcan. Flat washers are typically used under the head of a bolt of nut to distribute the forces applied when tightening. The zinc plating greatly decreases the corrosion rate. Please refer to the Parts Schematics page for lists of breakdowns.

$3.79

Miller Screw, Button Head, 3/8"-24 x 5/8"

This Button Head Screw from Miller Industries is used to screw the stop plates and slide pads onto boom weldments in many Miller Wrecker assemblies. These assemblies include wheel lift, SDU, underlift, and tower assemblies on Century, Challenger, and Holmes wreckers. The screw measures 3/8" diameter x 5/8" long with a thread size of 24. Please see the brochure tab for a list of breakdowns.

$0.39

Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"

This is the rear extend cylinder pin for many light duty wreckers by Miller Industries. This pin will work with most Century, Challenger, Champion, Holmes and Vulcan light duty wreckers. This pin measure 6" long with a diamter of 7/8". To view specific wrecker models this pin fits see Features below.

$27.49

Century Slide Pad 7" x 3" x 3/8"

This Slide Pad from Miller Industries is used in the wheel lift, underlift, and tower assemblies of several Century, Challenger, and Holmes wreckers. This slide pad measures 7" long, 3" tall, and 3/8" wide.

$17.79

Miller Jam Nut Hex 3/8" 16 Winch Clutch Control

This Hex Jam Nut from Miller Industries is used on the Winch Clutch Control of 4-Ton Hydraulic Winches,

$0.29

Century Wear Pad 3" x 3" Challenger Champion and Vulcan

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

$23.99

Shaft Extended Cylinder

This is a replacement extended cylinder shaft.

$88.99

Century Slider Pad 3" x 2 3/8" x 3/16"

This Slider Pad from Miller Industries is an inner tube slide pad for the bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and 3/16" wide. Please see the brochure tab for a full list of breakdowns.

$10.89

Miller Stop Plate 2 5/8" x 1" x 5/8"

This Stop Plate from Miller Industries is used in the assembly of wheel lifts, SDU, underlifts, and towers for many Miller car carriers and wreckers. Those include Century wreckers, Challenger wreckers, and Challenger, Champion, Holmes and Vulcan car carriers. This stop plate measures 2-5/8" long, 1" tall, and 5/8" wide. Please see the brochure tab for a list of breakdowns This part can be used to replace Part Number HD-106.

$23.99

Miller Screw, Allen Head, 3/8" x 3/4"

This 3/8" x 3/4" Allen Head Screw from Miller Industries is used on the Wheel Lift Assembly of Champion Carriers made prior to 2001, and Vulcan 10 Series Carriers made between 2003 and 2005.

$0.29

Miller Bolt on Spacer Pad, Century Wreckers

This 2nd Stage Bolt-On Spacer Pad from Miller Industries is used on the assembly of several Miller Heavy Duty Wreckers. These include Century and Challenger Wreckers. The spacer pad is generally used in the underlift and tower assembly, but it is also used on the LDU Assembly of Century 1140/1130 Wreckers. Please see the features below for a list of trucks and see the brochure tab for breakdowns.

$27.49

Fastenal 1/4" - 28 Grease Fitting w/ Ball Check

This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number

$0.29

Miller Retaining Ring, 1-1/2"

This 1-1/2" Retaining Ring from Miller Industries is used on many different assemblies including boom, Subframe, recovery boom, wheel lift boom, underlift, dual and single winch extendable boom, and dual and single winch non-extendable boom assemblies. These assemblies can be found on many Century, Challenger, Champion, Eagle, Holmes, and Vulcan Wreckers. See the brochures tab for a full list of assemblies and part schematics.

$7.49

Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

$39.99

Miller Stinger Pivot Pin, Vulcan 810/ Holmes 440SL

This is the pivot pin on the bottom of the boom of the Vulcan 810 and Holmes 440SL to be attached to the wheel lift stinger by Miller Industries. See Brochures for reference chart and Features for related parts.

$93.99