0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
3M Acrylic Foam Tape
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
$1.25
Buyers Rectangular 1620 Lumens LED Flood Light
This waterproof Flood Light from Buyers Products has 6 white LEDs with a black
powder coated cast aluminum housing. This light is a 12-24 volt system with a
1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable
stainless steel stud mount. The dimensions for this flood light are 5.75" W x
2" T x 3" D and weights around 1.6 lbs.
$43.39
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
In The Ditch Simple Locking Dolly Mount
In The Ditch's Locking Simple Mount is a great low cost way to hold your Speed Dollies and keep them safe. This mount is the same as the Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Choose from the Standard or the XD Mounts. The Standard is made for 4.8 Tires and the XD is made for 5.70 tires. Sold as
Each.
$136.99
–
$137.99
In The Ditch X-Series SLX Dolly Sets Speed Lube Spindle
These In The Ditch tow dollies hold up well against road grime, while the lightweight aluminum axle and ergonomic handle make it simple to maneuver on the recovery site. Bolt-on spindles are easy to replace with basic hand tools, and the speed-lube design (SLX) makes packing bearings effortless with a center grease zerk on this assembly. These dollies feature best in class capacity, and are available in powder coat black or zinc plated finish. They are also available with a tire size of 4.80 or 5.70.
$2,582.99
–
$2,897.99
In The Ditch Galvanized Steel Trash Cans w/ Lids
In The Ditch now has Galvanized Steel Trash Cans. Made from galvanized steel, these trash cans are guaranteed to last for years. You can choose from a 6 gallon trash can or a 4 gallon trash can. Each of these sizes comes with a lid included. The 4 gallon trash can and lid can be used to replace miller part number 124002700.
$37.49
–
$41.59
Maxxima 3/4" Stainless Grommet Cover
Stainless Steel Grommet cover for M09300 Clearance Marker Series, by Maxxima.
$1.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Phoenix 18 Position Junction Box
Phoenix 18 position Junction Box that ABS construction cannot corrode. Easy to
install with external mounting feet and hardware included.
$17.19
SnowDogg Lift Frame Assembly VXFII Rapidlink
SnowDogg VXFII Series Liftframe pairs with other series components to create a full snow plow. For 2020 to 2023.
$3,790.99
SnowDogg Mount Ford F250/F550 2017-2024 HD/EX/VX/CM Series
This is a SnowDogg Snow Plow Mount Kit for the 2017 Ford F250 - F550 chassis.
$552.99
SnowDogg Mount Ford F250/F550 2017-2024 MD Series
This is a SnowDogg Snow Plow Mount Kit for the 2017 Ford F-250 - 550 chassis.
This mount will work with the MD Series Plows only.
$552.99
SnowDogg Truckside Kit w/o Controller Gen2
The SnowDogg truckside kit includes the wiring harness and solenoid for the
truck and fits all Gen2 models. The truckside kit plugs into the plowside
harness.
$488.99
SnowDogg Universal LED Light Kit Pair
Buyers Products SnowDogg Illuminator LED Plow Lights are strong enough to punch
through dark nights and blinding blizzards. Full LED power is over twice as
bright as traditional halogens and lasts longer, providing years of light
without having to change a bulb. Active Defrosting Technology keeps the lights
from icing up as the temperatures drop, and since the whole lens is heated
evenly it prevents the banding and streaking common in other LED plow lights.
This means 100% of the Illuminator's light shines through.
$758.99
SnowDogg VXFII Snow Plow Moldboard Only
Moldboard only for the following snow plows VXF85II and VXF90II.
$3,051.99
–
$3,142.99
Fire Extinguisher 2 Lb 8oz with Mounting Bracket
Rechargeable dry chemical Fire Extinguisher. 2lb.8oz.
$60.99
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
