0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
AW Direct Volvo and Mack Air Fitting
Essential to heavy-duty tow operations, this 1/4" brass air fitting allows tow operators to tie into the existing air system of a Class 8 Volvo or Mack commercial truck to supply air to the brake system when the power unit is disabled and can no longer perform this function. Using air supplied by the rear of the tow truck, this application allows the tow operator to release the casualty's brakes and prepare it for towing. Simply install directly to the metric threads on the air tank of a Volvo or Mack tractor.
$7.99
B/A Products G100 Hi-Vis Bulk Chain
Easily identify your cargo chains and improve safety with this hi-vis chain
from B/A Products. Sold in bulk, this Grade 100 chain is available in two sizes
and strengths and can be used for overhead lifting. The hi-vis green color is
weather resistant as well.
$9.99
–
$17.99
Buyers 2" Pintle Hook Mount
Buyers Products 2 Inch Pintle Hook Mount slides into a 2 in. receiver to
provide a mounting plate for a variety of pintle hooks and combination hitches.
You can mount a pintle hook at either a high or low position to accommodate
trailer height
$45.29
–
$74.99
Buyers Hexigonal LED Mini Light Bar
This hexigonal LED mini light bar by Buyers Products has 56 amber LEDs with 10
flash patterns, synchronized or alternating. This light bar measures 15" x
8.25" x 3" and has a clear lens. It is powered by 12 -24 volts and draws 3.2
amps. It has four rubber covered magnetic or permanent mounts. This light bar
also comes with a 10' dual switch accessory power plug with a flash pattern
selector. This Mini Light Bar is available in Amber, Amber/ Clear or Amber
Blue.
$195.99
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
In The Ditch Short Frame Fork Storage Rack
Get your truck organized with this Frame Fork Storage Rack. This frame fork storage rack will easily mount in most tool boxes. The 23" rack can hold 6 regular forks and the 30" can hold 4 regular forks and 2 spring lift adapters. It fits most side box compartments. In a matter of minutes you can bolt the mount in place and keep all your forks in one place. This rack is made from 1/8" thick aluminum that will last forever and doesn't need to be painted.
$166.99
–
$176.99
JBC Revolution Series Colored Reflective Traffic Cone
JBC Revolution Series Cones are the leader in the traffic safety industry. Revolution Series Cones are made from an innovative injection molded design that holds up in all temperatures and maintains color in difficult UV situations. Indented handles at the top allow the cones to easily be picked up and stacked. The black bases are made entirely from recycled materials and are marked with a unique dotted pattern. Spot the dots to know it's JBC!
$17.19
–
$24.99
JBC Revolution Series Lime Reflective Traffic Cone
JBC Revolution Series Cones are the leader in the traffic safety industry. Revolution Series Cones are made from an innovative injection molded design that holds up in all temperatures and maintains color in difficult UV situations. Indented handles at the top allow the cones to easily be picked up and stacked. The black bases are made entirely from recycled materials and are marked with a unique dotted pattern. Spot the dots to know it s JBC!
$17.19
–
$33.99
Lodar Remote Replacement - IP Transmitter
Please call for custom faceplate options. All default faceplates on 6+function transmitters will be numbered.
$249.99
–
$389.99
Miller Bus Lift Eye Attachment
The 124002634 Lift Eye Attachment is designed for front lifts on many models of the RTS, GMC, and NOVA buses and rear picks on the MCI-9. The rear eye on an MCI ,GL, and GL3 series can be utilized for a rear pick. The eyelet that is bolted on to the jack pad point on many RTS, GMC, and NOVA buses is pinned into the lift eye attachment for a front pick.
$329.99
–
$791.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
RimSling Spliced Eye Synthetic Recovery Slings
Make your recoveries easier with The RimSling! This synthetic rope sling is
designed slimmer yet has a higher . The RimSling has a protective Cordura
Sleeve over the entire sling giving it maximum protection. Also, it has a
special braid guard at the center of the sling providing extended life. A 6"
sling eye is located on either end of the sling. The RimSling is also Made in
the USA!
$129.99
–
$769.99
Race Sport Lighting Economy Series Light Bar
Race Sport Lighting's ECO-Light series LED light bars feature proprietary optics for unmatched light output, all at an economical price point making them our premier entry level LED bar.
$74.99
–
$399.99
McKissick Evolution Series Snatch Blocks Miller Exclusive
The 420 Champion Series snatch blocks from McKissick are perfect for heavy duty rigging
operations because they greatly improve your winches function and pulling
power. The hooks and side plates are made from forged alloy steel that is also
heat treated. This makes the blocks exceptionally durable while keeping them as
light as possible. Each of these sizes will fit a 3/4" - 7/8" wireline. The
opening feature permits the insertion of a rope line while the block is
suspended from a gin-pole. The side plates on these snatch blocks have been
designed to eliminate the possibility of a rope jamming.
$1,240.99
–
$2,043.99
Samson Fid Repair Kit
| Item # | Size |
|---|---|
| SR-9010160 | 1/4" |
| SR-9010240 | 3/8" |
| SR-9010280 | 7/16" |
| SR-9010320 | 1/2" |
| SR-9010360 | 9/16" |
| SR-9010400 | 5/8" |
| SR-9010480 | 3/4" |
| SR-9010560 | 7/8" |
$4.99
–
$21.99
AmSteel-Blue Synthetic Winch Lines w/ Self-Locking Hook | 9/16" - 7/8"
AmSteel-Blue Synthetic Rope is a proven alternative to steel cables and steel
winch lines. Size-for-size, AmSteel-Blue is the same strength as steel wire
rope - yet it floats! These 12-strand, single braid winch lines yield the
maximum in strength-to-weight ratio and are torque free. Meaning attachment
hardware with a swivel is not necessary. AmSteel-Blue has extremely limited
stretching - only 1% at full WLL (4:1). Also, AmSteel-Blue Rope has superior flex fatigue and
is abrasion resistant.
When compared to steel cables, AmSteel-Blue Winch Lines are a fraction of the
weight. For example, a 3/4 " x 100' steel cable weighs 100 lbs while an
AmSteel-Blue rope with the same dimensions only weighs 13.3 lbs - almost 8
times lighter! Just think about how much easier the handling of the synthetic
Amsteel-Blue is for your operators verses a steel cable. Also, it drastically
cuts down on the overall weight of your truck - especially heavy duty rotator
wreckers which have up to 5 to 6 winches!
$759.99
–
$4,102.99
Oralite Daybright Retroreflective Tape
Daybright Conspicuity Sheeting is a tough, weather and solvent resistant microprismatic retroreflective sheeting designed for rugged outdoor use on the sides and rear of trucks, trailers, farm equipment, automobiles and all types of mobile and industrial equipment.
$46.89
–
$66.99
Whelen Micro Pioneer Work Light with Bail/Stud Mount Black Housing, 4-3/4"L x 4-5/8"W x 3-1/8"D
This rugged work light has an 8° spot spread pattern that comes standard. Plus,
you can choose from three other spread patterns with a supplied interchangeable
optic lens: 90° x 20° wide flood; 40° x 20° flood; or 40° x 8° flood. This
tough work light is built with a rugged die-cast aluminum housing with a
powder-coated finish. Stainless steel bail bracket with 3/8" stud carriage bolt
mount.
$348.99
–
$497.99
Zip's Grade 100 Clevis Cradle Grab Hook
Cradle grab hooks from Zip's are made from Grade 100 high-strength alloy steel and are approved for overhead lifting. A clevis pin allows for attachment to chain, and the size and grade are stamped on the side of the hook. See the drop-down menu for available sizes and working load limits.
$26.99
–
$80.99
Related products
Del City Pintle Hook Style Hitch Adapter
This receiver-mount pintle hook from Curt is designed to insert into any 2" x
2" receiver tube. With a solid shank and a gross trailer weight capacity of
20,000 lbs., it offers a solid complement to most Class V trailer hitches. The
pintle hook fits any lunette ring with a 2-1/2" inside eye diameter, and it
comes with a spring-loaded locking arm and safety pin for secure coupling.
$144.99
Buyers Tri-Ball Hitch w/ Pintle Hook
Buyers Products Tri-Ball Hitch with Pintle Hook offers maximum versatility for towing a range of loads with ball or pintle hitches. Easily swap between three different towing balls or a pintle hook to haul loads of various sizes and weights.
$99.99
–
$100.99
Buyers Tri Ball Hitch
The Tri-Ball Hitch with Black Towing Balls from Buyers Products is an
all-in-one, time-saving solution to handling different ball sizes and weight
requirements. . It measures 1 7/8, 2, 2 5/16. Tow up to 6,000 lb with the 1-7/8
in. ball; 7,500 lb with the 2 in. ball; and 10,000 lb with the 2-5/16 in. ball.
$58.99
Buyers Receiver-Mount Tow Eye
The Forged Receiver Mounted Tow Eye from Buyers Products features one-piece
forged steel construction. It can handle straight-line towing up to 12,000 lb.
The eye fits into any front or rear mounted 2 in. receiver tube. It has a
corrosion-resistant black powder-coated finish.
$44.09
Buyers Chrome Hitch Balls
Chrome Hitch Balls from Buyers Products are available in all standard sizes to
handle virtually any towing application. All hitch balls feature wear-resistant
chrome plating for durability and style.
$10.69
–
$18.69
Buyers 2" Pintle Hook Mount
Buyers Products 2 Inch Pintle Hook Mount slides into a 2 in. receiver to
provide a mounting plate for a variety of pintle hooks and combination hitches.
You can mount a pintle hook at either a high or low position to accommodate
trailer height
$45.29
–
$74.99
Buyers Long-Body Pintle Hook
Buyers Products 5 Ton Pintle Hook features a single-piece, drop-forged lower
jaw and a black powder-coated finish for maximum durability and resistance to
corrosion. It fits a 2 in. receiver tube for easy installation and removal. The
pintle hook is ideal for loads up to 10,000 lbs. The 5/8 in. hitch pin is sold
separately.
$76.99
Convert-A-Ball Nickel Plated Carbon Steel Trailer Ball and Shank
The Convert-A-Ball Hitch System is your answer to multi-need trailer
connections. No more wrenches and no more busted knuckles! This system comes
with three interchangeable chrome balls that fit on the 1" shank. These ball
sizes include 1-7/8", 2", and 2-5/16". The 1-7/8" and 2" balls work great on
the 3/4" shank as well.
$60.99
Convert-A-Ball Plastic Case
The Convert-A-Ball box protects and stores up to three hitch balls. It is made
from plastic and includes a cover.
$11.19
Convert-A-Ball Hitch System w/Plastic Case
The Convert-A-Ball Hitch System is your answer to multi-needed trailer
connections. No more wrenches, no more busted knuckles. Three interchangeable
balls (1 7/8", 2" and 2 5/16") fit on the 1" shank. The 1 7/8" and 2" balls
work great on the 3/4" shank.
$73.99
Convert-A-Ball Stainless Steel Trailer Ball and Shank Kit
Trailer Ball and Shank Kit includes three interchangeable balls (1-7/8", 2" and 2-5/16") that fit on a 1" regular shank.
$118.99
B/A Products Balldog Plus
B/A Exclusive! The BalldogTM Plus Hitch Attachment Device is the newest
innovation in hitch attachment. Pear Link fits over 1-7/8 , 2 and 2-5/16 Tow
Balls, Large Oblong fits into 2 and 2-1/2 Receiver Tubes.
$19.49
Convert-A-Ball Nickel Plated Carbon Steel Trailer Ball and Extra Long Shank
The Convert-A-Ball Hitch System is your answer to multi-need trailer
connections. No more wrenches and no more busted knuckles! This system comes
with three interchangeable chrome balls that fit on the 1" shank. These ball
sizes include 1-7/8", 2", and 2-5/16". The 1-7/8" and 2" balls work great on
the 3/4" shank as well.
$64.99
Buyers Receiver Hitch
CURT 2" ball mounts fit any trailer hitch with a 2" x 2" shank. We offer
several different types, including models with or without a trailer ball. Our
adjustable channel mounts are particularly popular. Other styles include
multi-ball, tow hooks mounts, forged and more.
$18.59
Del City Pintle Hook Style Hitch Adapter
This receiver-mount pintle hook from Curt is designed to insert into any 2" x
2" receiver tube. With a solid shank and a gross trailer weight capacity of
20,000 lbs., it offers a solid complement to most Class V trailer hitches. The
pintle hook fits any lunette ring with a 2-1/2" inside eye diameter, and it
comes with a spring-loaded locking arm and safety pin for secure coupling.
$144.99
Buyers Tri-Ball Hitch w/ Pintle Hook
Buyers Products Tri-Ball Hitch with Pintle Hook offers maximum versatility for towing a range of loads with ball or pintle hitches. Easily swap between three different towing balls or a pintle hook to haul loads of various sizes and weights.
$99.99
–
$100.99
Buyers Tri Ball Hitch
The Tri-Ball Hitch with Black Towing Balls from Buyers Products is an
all-in-one, time-saving solution to handling different ball sizes and weight
requirements. . It measures 1 7/8, 2, 2 5/16. Tow up to 6,000 lb with the 1-7/8
in. ball; 7,500 lb with the 2 in. ball; and 10,000 lb with the 2-5/16 in. ball.
$58.99
Buyers Receiver-Mount Tow Eye
The Forged Receiver Mounted Tow Eye from Buyers Products features one-piece
forged steel construction. It can handle straight-line towing up to 12,000 lb.
The eye fits into any front or rear mounted 2 in. receiver tube. It has a
corrosion-resistant black powder-coated finish.
$44.09
Buyers Chrome Hitch Balls
Chrome Hitch Balls from Buyers Products are available in all standard sizes to
handle virtually any towing application. All hitch balls feature wear-resistant
chrome plating for durability and style.
$10.69
–
$18.69
Buyers 2" Pintle Hook Mount
Buyers Products 2 Inch Pintle Hook Mount slides into a 2 in. receiver to
provide a mounting plate for a variety of pintle hooks and combination hitches.
You can mount a pintle hook at either a high or low position to accommodate
trailer height
$45.29
–
$74.99
Buyers Long-Body Pintle Hook
Buyers Products 5 Ton Pintle Hook features a single-piece, drop-forged lower
jaw and a black powder-coated finish for maximum durability and resistance to
corrosion. It fits a 2 in. receiver tube for easy installation and removal. The
pintle hook is ideal for loads up to 10,000 lbs. The 5/8 in. hitch pin is sold
separately.
$76.99
Convert-A-Ball Nickel Plated Carbon Steel Trailer Ball and Shank
The Convert-A-Ball Hitch System is your answer to multi-need trailer
connections. No more wrenches and no more busted knuckles! This system comes
with three interchangeable chrome balls that fit on the 1" shank. These ball
sizes include 1-7/8", 2", and 2-5/16". The 1-7/8" and 2" balls work great on
the 3/4" shank as well.
$60.99
Convert-A-Ball Plastic Case
The Convert-A-Ball box protects and stores up to three hitch balls. It is made
from plastic and includes a cover.
$11.19
Convert-A-Ball Hitch System w/Plastic Case
The Convert-A-Ball Hitch System is your answer to multi-needed trailer
connections. No more wrenches, no more busted knuckles. Three interchangeable
balls (1 7/8", 2" and 2 5/16") fit on the 1" shank. The 1 7/8" and 2" balls
work great on the 3/4" shank.
$73.99
Convert-A-Ball Stainless Steel Trailer Ball and Shank Kit
Trailer Ball and Shank Kit includes three interchangeable balls (1-7/8", 2" and 2-5/16") that fit on a 1" regular shank.
$118.99
B/A Products Balldog Plus
B/A Exclusive! The BalldogTM Plus Hitch Attachment Device is the newest
innovation in hitch attachment. Pear Link fits over 1-7/8 , 2 and 2-5/16 Tow
Balls, Large Oblong fits into 2 and 2-1/2 Receiver Tubes.
$19.49
Convert-A-Ball Nickel Plated Carbon Steel Trailer Ball and Extra Long Shank
The Convert-A-Ball Hitch System is your answer to multi-need trailer
connections. No more wrenches and no more busted knuckles! This system comes
with three interchangeable chrome balls that fit on the 1" shank. These ball
sizes include 1-7/8", 2", and 2-5/16". The 1-7/8" and 2" balls work great on
the 3/4" shank as well.
$64.99
Buyers Receiver Hitch
CURT 2" ball mounts fit any trailer hitch with a 2" x 2" shank. We offer
several different types, including models with or without a trailer ball. Our
adjustable channel mounts are particularly popular. Other styles include
multi-ball, tow hooks mounts, forged and more.
$18.59
