0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Maxxima LED Light Reflector 2 1/2" Round
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
$5.79
Buyers Circuit Breakers Hi-Amp
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
$25.79
–
$41.29
Buyers Cylinder and Key
This Cylinder and Key is from Buyers Products. It is a 39 Cylinder and a LL71
Key, they are both included in this order.
$8.29
3M Acrylic Foam Tape
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
$1.25
Truck-Lite Round License Plate Lamp
This round, push in style light can be used as a license plate light or a control panel light. It is commonly used on the Mounting and Tilt Frame Assembly of several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0300867.
$4.82
Buyers Round Incandescent Flood Light
Buyers Products 5 Inch Incandescent Flood Light has a sealed rubber housing and
a blunt cut connection. It sits on a zinc-plated mount and has a 10 in. lead
length. The 35W light is IP67 rated for water and dust resistance.
$9.39
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
Howes Lubricator and Penetrating Oil 12 oz.
Howes Lubricator heavy-duty, multi-purpose Lubricator and Penetrating Oil is guaranteed to loosen rusted nuts and bolts. The lubricant can be sprayed on wires, leads and distributor caps and is safe to use on almost any surface.
$16.99
Buyers Stainless Steel Standard T Handle Latch
This is a positive locking latch from Buyers Products. This latch is lockable
by key and is made from stainless steel. It will fit most underbody toolboxes.
Mounting holes, included gasket, and flush-mount design provide a snug
installation. The cam adjusts from 1-1/4 in. to 2 in. to accommodate varying
door thicknesses. The latch is shaped and sized to accommodate standard-size
cut-outs.
$21.59
Buyers Paddle Latch Standard With Lock
Buyers Products Standard Size Flush Mount Non-Locking Paddle Latch is a single
point latch built to handle the demands of daily use. The non-locking,
rectangular latch is designed to mount into a 3-3/8 in. by 4-5/8 in. recess and
is available in rust-resistant steel (welded on) or stainless steel (bolted
on).
$15.39
–
$25.59
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Phoenix 12 Position Junction Box
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
$16.19
United Safety Tow Light w/ Case and Female Plug
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
$105.99
Truck Star Back Up Alarm
This self-grounding Back-Up Alarm from Truck Star by Buyers has 97 decibels. It
also comes with 12-24 DC.
$24.79
Zips Detent Kit Century / Vulcan
This Detent Kit from Zip's will help to keep the crossbar straight. It fits
Vulcan style crossbars, Vulcan Car Carrier Wheel Lifts, and Century Car Carrier
Wheel Lifts with Vulcan crossbars. The kit includes a ball, spring, washers,
and a threaded plug.
$33.99
Related products
Buyers T-Handle Latch, Powder Coated w/ Chrome Handle
This is a replacement T-Handle Latch from Buyers Products. This latch is powder
coated and has a chrome handle.
$40.99
Century Wreckers Hanson Latch
This replacement Latch from Hanson is typically used on Century Heavy Duty
Wreckers. It is made from aluminum and has a lock over striker pin. The latch
is lockable with the provided key.
$360.99
Buyers Paddle Latch Standard With Lock
Buyers Products Standard Size Flush Mount Non-Locking Paddle Latch is a single
point latch built to handle the demands of daily use. The non-locking,
rectangular latch is designed to mount into a 3-3/8 in. by 4-5/8 in. recess and
is available in rust-resistant steel (welded on) or stainless steel (bolted
on).
$15.39
–
$25.59
Miller Paddle D-Latch Mechanism
Latch mechanism and hardware for D-paddle latches for storage doors on Vulcan
Heavy Duty wrecker bodies.
$87.99
Buyers Standard Size Rectangular Rotary Paddle Latch
Buyers Products Standard Size Rectangular Rotary Paddle Latch is a single-point
rotary latch with installed gasket and is designed to handle the demands of
daily use. Constructed from polished stainless steel, this rectangular latch has hidden
studs to add an extra level of security. Simply close the latch and go, or use
the included keys to lock it.
$44.69
RC Industries Replacement Stainless T Handle Latch
This is a replacement T-handle latch that will fit RC toolboxes. This latch is
stainless steel which makes it resistant to rust.
$69.99
Tri-Mark Stainless Paddle Latch
This stainless steel Paddle Latch is for use with new style toolboxes that have
a striker pin for a latch. The latch locks over the striker pin. This latch
comes with a lock and is lockable by key, which is included.
$117.65
Buyers Stainless Steel Standard T Handle Latch
This is a positive locking latch from Buyers Products. This latch is lockable
by key and is made from stainless steel. It will fit most underbody toolboxes.
Mounting holes, included gasket, and flush-mount design provide a snug
installation. The cam adjusts from 1-1/4 in. to 2 in. to accommodate varying
door thicknesses. The latch is shaped and sized to accommodate standard-size
cut-outs.
$21.59
Jerr-Dan Ergo T-Handle Latch
This is a Jerr-Dan latch, it is an ergo t-handle. It is for the driver's side.
$200.99
Allegis Hansen Door Latch
This Hansen Door Latch from Miller Industries is used on the Body Assembly
Toolbox Doors of Century 1040B / SDU3 Wreckers. The latch replaces your new
style push button latch. See the brochure tab for breakdowns.
$155.99
Miller Rotary Style Latch
This stainless steel rotary style latch from Miller Industries is used on the
new style toolboxes with a striker pin for a latch. It comes with a lock and
key. This part can be used to replace part number 9048750. This latch uses
striker part number 12-0803703 and gasket part number 12-0304425.
$120.99
In The Ditch Left Rotary Latch (Fits All Models)
Left Rotary Latch (Fits All Models) Serial # 500657 or newer,
$30.69
Buyers T-Handle Latch, Powder Coated w/ Chrome Handle
This is a replacement T-Handle Latch from Buyers Products. This latch is powder
coated and has a chrome handle.
$40.99
Century Wreckers Hanson Latch
This replacement Latch from Hanson is typically used on Century Heavy Duty
Wreckers. It is made from aluminum and has a lock over striker pin. The latch
is lockable with the provided key.
$360.99
Buyers Paddle Latch Standard With Lock
Buyers Products Standard Size Flush Mount Non-Locking Paddle Latch is a single
point latch built to handle the demands of daily use. The non-locking,
rectangular latch is designed to mount into a 3-3/8 in. by 4-5/8 in. recess and
is available in rust-resistant steel (welded on) or stainless steel (bolted
on).
$15.39
–
$25.59
Miller Paddle D-Latch Mechanism
Latch mechanism and hardware for D-paddle latches for storage doors on Vulcan
Heavy Duty wrecker bodies.
$87.99
Buyers Standard Size Rectangular Rotary Paddle Latch
Buyers Products Standard Size Rectangular Rotary Paddle Latch is a single-point
rotary latch with installed gasket and is designed to handle the demands of
daily use. Constructed from polished stainless steel, this rectangular latch has hidden
studs to add an extra level of security. Simply close the latch and go, or use
the included keys to lock it.
$44.69
RC Industries Replacement Stainless T Handle Latch
This is a replacement T-handle latch that will fit RC toolboxes. This latch is
stainless steel which makes it resistant to rust.
$69.99
Tri-Mark Stainless Paddle Latch
This stainless steel Paddle Latch is for use with new style toolboxes that have
a striker pin for a latch. The latch locks over the striker pin. This latch
comes with a lock and is lockable by key, which is included.
$117.65
Buyers Stainless Steel Standard T Handle Latch
This is a positive locking latch from Buyers Products. This latch is lockable
by key and is made from stainless steel. It will fit most underbody toolboxes.
Mounting holes, included gasket, and flush-mount design provide a snug
installation. The cam adjusts from 1-1/4 in. to 2 in. to accommodate varying
door thicknesses. The latch is shaped and sized to accommodate standard-size
cut-outs.
$21.59
Jerr-Dan Ergo T-Handle Latch
This is a Jerr-Dan latch, it is an ergo t-handle. It is for the driver's side.
$200.99
Allegis Hansen Door Latch
This Hansen Door Latch from Miller Industries is used on the Body Assembly
Toolbox Doors of Century 1040B / SDU3 Wreckers. The latch replaces your new
style push button latch. See the brochure tab for breakdowns.
$155.99
Miller Rotary Style Latch
This stainless steel rotary style latch from Miller Industries is used on the
new style toolboxes with a striker pin for a latch. It comes with a lock and
key. This part can be used to replace part number 9048750. This latch uses
striker part number 12-0803703 and gasket part number 12-0304425.
$120.99
In The Ditch Left Rotary Latch (Fits All Models)
Left Rotary Latch (Fits All Models) Serial # 500657 or newer,
$30.69
