Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This Marker/Clearance Light from Whelen comes with a square lens and flashing
LED. These small lights provide the solution to putting LED lighting virtually
anywhere on your vehicle. Each light contain four bright LEDs that are
available in either Amber or Red. They include a chrome plated flange and
mounting gasket.
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
This waterproof Flood Light from Buyers Products has 6 white LEDs with a black
powder coated cast aluminum housing. This light is a 12-24 volt system with a
1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable
stainless steel stud mount. The dimensions for this flood light are 5.75" W x
2" T x 3" D and weights around 1.6 lbs.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
In The Ditch now has Galvanized Steel Trash Cans. Made from galvanized steel, these trash cans are guaranteed to last for years. You can choose from a 6 gallon trash can or a 4 gallon trash can. Each of these sizes comes with a lid included. The 4 gallon trash can and lid can be used to replace miller part number 124002700.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
Buyers Products Tri-Ball Hitch with Pintle Hook offers maximum versatility for towing a range of loads with ball or pintle hitches. Easily swap between three different towing balls or a pintle hook to haul loads of various sizes and weights.
The Tri-Ball Hitch with Black Towing Balls from Buyers Products is an
all-in-one, time-saving solution to handling different ball sizes and weight
requirements. . It measures 1 7/8, 2, 2 5/16. Tow up to 6,000 lb with the 1-7/8
in. ball; 7,500 lb with the 2 in. ball; and 10,000 lb with the 2-5/16 in. ball.
The Forged Receiver Mounted Tow Eye from Buyers Products features one-piece
forged steel construction. It can handle straight-line towing up to 12,000 lb.
The eye fits into any front or rear mounted 2 in. receiver tube. It has a
corrosion-resistant black powder-coated finish.
Chrome Hitch Balls from Buyers Products are available in all standard sizes to
handle virtually any towing application. All hitch balls feature wear-resistant
chrome plating for durability and style.
Buyers Products 2 Inch Pintle Hook Mount slides into a 2 in. receiver to
provide a mounting plate for a variety of pintle hooks and combination hitches.
You can mount a pintle hook at either a high or low position to accommodate
trailer height
Buyers Products 5 Ton Pintle Hook features a single-piece, drop-forged lower
jaw and a black powder-coated finish for maximum durability and resistance to
corrosion. It fits a 2 in. receiver tube for easy installation and removal. The
pintle hook is ideal for loads up to 10,000 lbs. The 5/8 in. hitch pin is sold
separately.
The Convert-A-Ball Hitch System is your answer to multi-need trailer
connections. No more wrenches and no more busted knuckles! This system comes
with three interchangeable chrome balls that fit on the 1" shank. These ball
sizes include 1-7/8", 2", and 2-5/16". The 1-7/8" and 2" balls work great on
the 3/4" shank as well.
The Convert-A-Ball Hitch System is your answer to multi-needed trailer
connections. No more wrenches, no more busted knuckles. Three interchangeable
balls (1 7/8", 2" and 2 5/16") fit on the 1" shank. The 1 7/8" and 2" balls
work great on the 3/4" shank.
B/A Exclusive! The BalldogTM Plus Hitch Attachment Device is the newest
innovation in hitch attachment. Pear Link fits over 1-7/8 , 2 and 2-5/16 Tow
Balls, Large Oblong fits into 2 and 2-1/2 Receiver Tubes.
The Convert-A-Ball Hitch System is your answer to multi-need trailer
connections. No more wrenches and no more busted knuckles! This system comes
with three interchangeable chrome balls that fit on the 1" shank. These ball
sizes include 1-7/8", 2", and 2-5/16". The 1-7/8" and 2" balls work great on
the 3/4" shank as well.
CURT 2" ball mounts fit any trailer hitch with a 2" x 2" shank. We offer
several different types, including models with or without a trailer ball. Our
adjustable channel mounts are particularly popular. Other styles include
multi-ball, tow hooks mounts, forged and more.
This receiver-mount pintle hook from Curt is designed to insert into any 2" x
2" receiver tube. With a solid shank and a gross trailer weight capacity of
20,000 lbs., it offers a solid complement to most Class V trailer hitches. The
pintle hook fits any lunette ring with a 2-1/2" inside eye diameter, and it
comes with a spring-loaded locking arm and safety pin for secure coupling.
Buyers Products Tri-Ball Hitch with Pintle Hook offers maximum versatility for towing a range of loads with ball or pintle hitches. Easily swap between three different towing balls or a pintle hook to haul loads of various sizes and weights.
The Tri-Ball Hitch with Black Towing Balls from Buyers Products is an
all-in-one, time-saving solution to handling different ball sizes and weight
requirements. . It measures 1 7/8, 2, 2 5/16. Tow up to 6,000 lb with the 1-7/8
in. ball; 7,500 lb with the 2 in. ball; and 10,000 lb with the 2-5/16 in. ball.
The Forged Receiver Mounted Tow Eye from Buyers Products features one-piece
forged steel construction. It can handle straight-line towing up to 12,000 lb.
The eye fits into any front or rear mounted 2 in. receiver tube. It has a
corrosion-resistant black powder-coated finish.
Chrome Hitch Balls from Buyers Products are available in all standard sizes to
handle virtually any towing application. All hitch balls feature wear-resistant
chrome plating for durability and style.
Buyers Products 2 Inch Pintle Hook Mount slides into a 2 in. receiver to
provide a mounting plate for a variety of pintle hooks and combination hitches.
You can mount a pintle hook at either a high or low position to accommodate
trailer height
Buyers Products 5 Ton Pintle Hook features a single-piece, drop-forged lower
jaw and a black powder-coated finish for maximum durability and resistance to
corrosion. It fits a 2 in. receiver tube for easy installation and removal. The
pintle hook is ideal for loads up to 10,000 lbs. The 5/8 in. hitch pin is sold
separately.
The Convert-A-Ball Hitch System is your answer to multi-need trailer
connections. No more wrenches and no more busted knuckles! This system comes
with three interchangeable chrome balls that fit on the 1" shank. These ball
sizes include 1-7/8", 2", and 2-5/16". The 1-7/8" and 2" balls work great on
the 3/4" shank as well.
The Convert-A-Ball Hitch System is your answer to multi-needed trailer
connections. No more wrenches, no more busted knuckles. Three interchangeable
balls (1 7/8", 2" and 2 5/16") fit on the 1" shank. The 1 7/8" and 2" balls
work great on the 3/4" shank.
B/A Exclusive! The BalldogTM Plus Hitch Attachment Device is the newest
innovation in hitch attachment. Pear Link fits over 1-7/8 , 2 and 2-5/16 Tow
Balls, Large Oblong fits into 2 and 2-1/2 Receiver Tubes.
The Convert-A-Ball Hitch System is your answer to multi-need trailer
connections. No more wrenches and no more busted knuckles! This system comes
with three interchangeable chrome balls that fit on the 1" shank. These ball
sizes include 1-7/8", 2", and 2-5/16". The 1-7/8" and 2" balls work great on
the 3/4" shank as well.
CURT 2" ball mounts fit any trailer hitch with a 2" x 2" shank. We offer
several different types, including models with or without a trailer ball. Our
adjustable channel mounts are particularly popular. Other styles include
multi-ball, tow hooks mounts, forged and more.
This receiver-mount pintle hook from Curt is designed to insert into any 2" x
2" receiver tube. With a solid shank and a gross trailer weight capacity of
20,000 lbs., it offers a solid complement to most Class V trailer hitches. The
pintle hook fits any lunette ring with a 2-1/2" inside eye diameter, and it
comes with a spring-loaded locking arm and safety pin for secure coupling.