Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Slip Plate is a heavy duty all purpose dry film graphite lubricant. It will not collect dirt, dust, mud or grit. Bonds quickly to any clean surface, eliminates sticking and material buildup. Will not wash away.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
This waterproof Flood Light from Buyers Products has 6 white LEDs with a black
powder coated cast aluminum housing. This light is a 12-24 volt system with a
1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable
stainless steel stud mount. The dimensions for this flood light are 5.75" W x
2" T x 3" D and weights around 1.6 lbs.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Get your truck organized with this Frame Fork Storage Rack. This frame fork storage rack will easily mount in most tool boxes. The 23" rack can hold 6 regular forks and the 30" can hold 4 regular forks and 2 spring lift adapters. It fits most side box compartments. In a matter of minutes you can bolt the mount in place and keep all your forks in one place. This rack is made from 1/8" thick aluminum that will last forever and doesn't need to be painted.
Maxxima M09300 Series of P2PC Combination Mini-Clearance Marker Lights. Each
Light Comes With An Attached Grommet For Quick Mounting. 3 SMD LED's Provide
Superior Light Output Meeting PC Requirements.
The solid state flange assembly will be made of a grey polycarbonate then
incased in a chrome plated finish or a black finish. The M4FC and the M4FB
shall have the ability to surface mount any M4 Super-LED series warning lights.
The M4 series warning light is sold separately.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
AmSteel-Blue Synthetic Rope is a proven alternative to steel cables and steel
winch lines. Size-for-size, AmSteel-Blue is the same strength as steel wire
rope - yet it floats! These 12-strand, single braid winch lines yield the
maximum in strength-to-weight ratio and are torque free. Meaning attachment
hardware with a swivel is not necessary. AmSteel-Blue has extremely limited
stretching - only 1% at full WLL (4:1). Also, AmSteel-Blue Rope has superior flex fatigue and
is abrasion resistant.
When compared to steel cables, AmSteel-Blue Winch Lines are a fraction of the
weight. For example, a 3/4 " x 100' steel cable weighs 100 lbs while an
AmSteel-Blue rope with the same dimensions only weighs 13.3 lbs - almost 8
times lighter! Just think about how much easier the handling of the synthetic
Amsteel-Blue is for your operators verses a steel cable. Also, it drastically
cuts down on the overall weight of your truck - especially heavy duty rotator
wreckers which have up to 5 to 6 winches!
These 33 Series 3/4" Sealed LED Lights from Truck-Lite are the worlds smallest
LED marker for the transportation industry. Choose from a Red or Yellow light,
both colors come with a clear lens and they are completely sealed in epoxy to
resist corrosion and moisture. These lights draw less current, which allows for
more power on your other vehicle requirements.
Grab everyone's attention with colorful accent lighting from Trux Accessories. These glow
strip LEDs can complement any truck body moulding, illuminate the
ground or add color to interior storage bays. These
powerful 12V strips feature LED diodes, making them brighter than
traditional incandescent lights.
This is an inner & outer tube bearing pad for the wheel lift of a Century or
Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each
equipped wheel lift. See Features for which years/models they are used on.
These are the spacer bars of the wheel lift on many light duty wreckers and a
few medium duty wreckers by Miller Industries. They are located on the top,
inside of the outer stinger and the top, outside of the inner stinger. These
spacer bars will fit the following wreckers: Century Modular Express 300
Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes
440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder,
Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold
separately.
This is an inner tube slide pad for the top side of the auto-grip wheel lift
option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad
sold separately.
This is a wheel lift wear pad for the outside, top of the inner stinger on
Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on
the Century Express Modular 300 Series Wreckers by Miller Industries. See
Features for related parts and Brochures for reference charts.
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The
dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used
on the Jerr-Dan HPL-30 and HPL-60 Wreckers.
This Slider Pad from Miller Industries is an inner tube slide pad for the
bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and
Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and
3/16" wide. Please see the brochure tab for a full list of breakdowns.
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century
211/300 Series, and Holmes 440SL by Miller Industries. They are located on the
top, inside of the outer stinger. See Brochures for reference chart.
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
This is an inner & outer tube bearing pad for the wheel lift of a Century or
Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each
equipped wheel lift. See Features for which years/models they are used on.
These are the spacer bars of the wheel lift on many light duty wreckers and a
few medium duty wreckers by Miller Industries. They are located on the top,
inside of the outer stinger and the top, outside of the inner stinger. These
spacer bars will fit the following wreckers: Century Modular Express 300
Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes
440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder,
Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold
separately.
This is an inner tube slide pad for the top side of the auto-grip wheel lift
option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad
sold separately.
This is a wheel lift wear pad for the outside, top of the inner stinger on
Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on
the Century Express Modular 300 Series Wreckers by Miller Industries. See
Features for related parts and Brochures for reference charts.
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The
dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used
on the Jerr-Dan HPL-30 and HPL-60 Wreckers.
This Slider Pad from Miller Industries is an inner tube slide pad for the
bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and
Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and
3/16" wide. Please see the brochure tab for a full list of breakdowns.
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century
211/300 Series, and Holmes 440SL by Miller Industries. They are located on the
top, inside of the outer stinger. See Brochures for reference chart.
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.