0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Maxxima LED Light Reflector 2 1/2" Round
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
$5.79
Hella Side LED Marker Light
These LED Side Marker Lights from Hella are available in either amber or red.
They are commonly used on Modular Wreckers from Century and Vulcan. See the
features below for a list of wreckers and see the brochure tab for breakdowns.
$55.99
Buyers Round Incandescent Flood Light
Buyers Products 5 Inch Incandescent Flood Light has a sealed rubber housing and
a blunt cut connection. It sits on a zinc-plated mount and has a 10 in. lead
length. The 35W light is IP67 rated for water and dust resistance.
$9.39
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Buyers Rectangular 1620 Lumens LED Flood Light
This waterproof Flood Light from Buyers Products has 6 white LEDs with a black
powder coated cast aluminum housing. This light is a 12-24 volt system with a
1.5 Amp draw that has an output of 1620 Lumens. Light comes with an adjustable
stainless steel stud mount. The dimensions for this flood light are 5.75" W x
2" T x 3" D and weights around 1.6 lbs.
$43.39
B/A Products J Chain 15" J Hook / Grab Hook / Hammerhead Hook G70
These Grade 70 Chain assemblies are 5/16" and include a 15" j-hook at one end
and a grab hook and hammerhead t-j combo hook on the other end. The forged, heat
treated steel has excellent wear and abrasion resistance.
$71.99
–
$79.99
Miller 2" Wheel Lift L-Arm - Century, Champion, Challenger and Vulcan Carriers
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
$209.99
Miller Crossbar Fork Adapter Offset Fork Holder
These Low Profile Fork Holders are designed to fit a 5" x 5" or 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products.
$752.99
–
$1,157.99
Miller Medium Axle Fork - 3" Wide Opening
This fork from Miller Industreis is Cast Steel Alloy. These forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.
$190.99
–
$349.99
Miller Short Axle Fork - 3" Wide Opening
This 3" Short Fork from Miller Industries is used to pick up from the leaf spring, axle or fame of a truck. These forks are made from one piece of cast alloy steel. This process has made the yield strength increase almost two fold while making the weight almost 30% lighter. The fork has a 3" wide opening with a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the cutout.
$139.99
–
$304.99
Truck Star Back Up Alarm
This self-grounding Back-Up Alarm from Truck Star by Buyers has 97 decibels. It
also comes with 12-24 DC.
$25.79
Amber/Clear Replacement Bulb
Option of amber or clear bulb.The Neutral White, High Intensity 12V, 180 Degree
Illumination Landscape, Park Light, Number, License Plate Light, Trunk Light,
Instrument/Gauge Light, Side Light 35 x Longer Life Time Compared with
Traditional Incandescent Bulbs. Plus Less Heat Output and Extremely Low Power
Consumption.
$2.52
–
$2.85
Buyers Weld On Grab Hooks
These Weld-On Grab Hooks from Buyers Products are perfect for use with safety
chains. Just weld these hooks on to the back of your wheel grids, or anywhere
else you need an extra hook.
$3.99
–
$8.39
B/A Products Wheel Lift Tie-Down Strap with D-Rings
Available in Classic, Tower's Edge or Heavy Duty webbing these straps are 2
inches wide and come with a d-ring attached at one end. Wheel Lift Straps are
perfect for securing vehicles tires to any wheel lift.
$8.99
–
$17.99
Zips Detent Kit Century / Champion
This Detent Kit from Zip's will help hold the crossbar straight when it is not
loaded. It fits Century and Champion Wheel Lifts. The kit includes a 12-0301398 ball, 12-0301197 spring and 12-0702546 spacer.
$38.99
Zips Pivot Pin Kit Wrecker / Carrier 01 and Older Formula I
This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger
I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts
('01 and older). This kit includes one
$190.99
B/A Products Wheel Lift Tie-Down Strap Assembly with D-Ring and Ratchet with Finger Hook
This 84" replacement Tie-Down Strap comes with a Ratchet that has a finger hook
attached to it on one end and a D-Ring attached to the other end. This strap is
yellow and comes with "Zip's" printed into the webbing.
$32.99
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
