0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Century / Champion / Vulcan / LCG Right Crosstube 3.5"
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,
$417.99
Miller Wear Pad 1/2 x 2 x 4 W/Holes
This is a replacement nylon wear pad for a 4,000 lb. wheel lift. This wear pad
measures 1/2" x 2" x 4". These wear pads are pre-drilled for easy
installation.
$25.69
Miller Wheel Lift Extend Cylinder 3" x 54"
This Wheel Lift Extend Cylinder measures 3" x 54". It is designed to withstand
necessary forces and to be used at states pressures. This cylinder meets
industry and government specifications and will prove itself on the job when it
really matters. It is used on Century Generation II 16 Series Car Carriers.
Please see the features below for a list of trucks and the brochure tab for a
list of breakdowns.
$1,136.99
Snap Ring,1 In Internal
This 1 Snap Ring from Miller Industries is used on the bed and frame assembly
of several Miller Car Carriers. These include Century, Challenger, Champion,
Holmes, and Vulcan carriers.
$1.29
3M Acrylic Foam Tape
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
$1.25
FVP Brake Cleaner 13 oz. Can
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
$4.49
Maxxima 2 1/2" Round Dual Volt Clearance Marker
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
$9.09
Fastenal 1/4" - 28 Grease Fitting w/ Ball Check
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
$0.29
Chevron Wheel Lift Wear Pad Inner Boom 12 / 16 LCG Gen II
This is an inner tube slide pad for the top side of the wheel lift on the
Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold
separately.
$16.89
Cylinder Pin, Carrier Non Ag
This is a cylinder pin, carrier non ag. .980 x 9 1/2, started 10/06.
$46.99
Miller Steel Wheel Lift L-Arm - Century, Champion, Holmes and Vulcan Carriers
Note: Special Handling Fees Apply
This zinc-plated mild steel L-Arm from Miller Industries fits both sides of the wheel lift on Century, Champion, Holmes and Vulcan car carriers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm slides into the outer crosstube for a secure tire rest.
This zinc-plated mild steel L-Arm from Miller Industries fits both sides of the wheel lift on Century, Champion, Holmes and Vulcan car carriers. Otherwise known as a tire restraint or wheel retainer, this adjustable L-Arm slides into the outer crosstube for a secure tire rest.
- Driver or passenger position
- Zinc-plated mild steel
- Adjustment holes
- 2" x 2" x 31.86"
Fits: - 2001-Current Century 10 Series Steel & Aluminum Carriers
- 2009-Current Century LCG 12 Series Steel & Aluminum Carriers
- 2002-Current Century 15 Series Steel & Aluminum Carriers
- 2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
- 2006-Current Century 20 Series Steel & Aluminum Carriers
- 2001-Current Champion Steel & Aluminum 19'-21' Carriers
- 2001-Current Holmes 10 Series Steel & Aluminum Carriers
- 2005-Current Vulcan 10 Series Steel & Aluminum Carriers
$242.99
Miller Ball, Chrome, 1"
This 1" Chrome Ball from Miller Industries is used on the Wheel Lift and
Retainer Assembly of several Miller Car Carriers. These include Century,
Challenger, Champion, Holmes, and Vulcan carriers. Please see the features
below for a list of carriers, and see the brochure tab for a list of
breakdowns.
$7.49
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
