Miller Crossbar Pivot Pin, For Gen 3 Crossbar

Miller Control Long Knobs

These are Miller Industries Control Handle Knobs. They are offered in Blue (12-0311699), Red (12-0311700), Green (12-0311701) and Gray (12-0311702).

$15.39

Snap Ring 3/4External

This is a replacement 3/4" external snap ring.

$5.09

In The Ditch Bolt On Spindle Kit Right or Left SLX-SD Dolly

This is a replacement bolt on spindle kit for the right or left hand side of the X-Series Standard Duty Dolly by In The Ditch.

$122.99

Miller Crossbar Fork Adapter Offset Fork Holder

These Low Profile Fork Holders are designed to fit a 5" x 5" or 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products.

$752.99 – $1,157.99

B/A Products Ratchet Tie-Down Assembly w/ Coated S Hooks

These straps come with a ratchet and s-hooks attached at each end of the strap. Use Cargo Tie-Down Straps to secure your equipment and cargo in truck beds, trailers, and carriers. Easy to use ratcheting makes tightening and securing your load fast and easy.

$16.99 – $25.18

B/A Products Wheel Lift Tie-Down Strap with Flat Hook and Cordura Sleeve

Available in Classic, Tower's Edge or Heavy Duty webbing these 2" straps come with a flat snap hook attached at one end of each. A Cordura sleeve provides added protection on each strap. These straps are commonly used on Dynamic Tow Trucks. Wheel Lift Straps are perfect for securing vehicles tires to any wheel lift.

$16.99 – $24.99

Miller 6.5" Thrust Washer Century / Challenger / Holmes

This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many different Miller Wrecker assemblies. These assemblies include the boom, wheel lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes Wreckers. Please see the brochure for a full list of breakdowns.

$12.99

Miller 1/2-20X2-1/2" FHSCS, Blackoxide

$4.49

Vulcan 807 Aluminum Bronze Wheel Lift Bushing

This is an aluminum bronze bushing for a wheel lift pivot pin on a Vulcan 807 by Miller Industries.

$82.99

Miller Pivot Pin Keeper Plate for Gen 3

This is a Miller pivot pin keeper plate. It is for a gen 3.

$56.99

Miller 5/8-11X5" Flat Head Socket Capscrew

$10.99

Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

$10.59

Fastenal 1/4" - 28 Grease Fitting w/ Ball Check

This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number

$0.29

Lock Nut, Flexible, 5/8"-11

This Flexible Lock Nut is used in the assembly of Century and Holmes wreckers from Miller Industries. This nut can be used in the wheel lift, boom, or crossbar assembly. Please see the brochure tab for a list of breakdowns where this nut is used. Start by hand, and then wrench the nut into position anywhere along the stud or fastener; the expansion of the top slotted section locks the nut. Made from a single piece of metal, these nuts have greater fatigue strengths than similar size nylock nuts and can be used in higher temperature applications. The Cadmium plating provides excellent corrosion resistance and improves conductivity.

$2.49

Miller Knee Boom Spacer Slide Pad

This 2-1/4" Slide Pad from Miller Industries is used on the outer tube Boom/Wheel Lift Assembly of Several Miller Wreckers.

$9.19

Miller Claw Pivot Bushing

$112.99

Miller 1" Chrome Ball

This 1" Chrome Ball from Miller Industries is used on many assembly applications, including crossbar, outer crosstube, underlift, wheel lift, and crossbeam assembly. These assemblies are for Century, Holmes, and Vulcan Car Carriers, as well as Vulcan Wreckers. See the brochure tab for a full list of assemblies and part schematics.

$14.69

Century Wheel Lift Outer Tube Pad Shim Holmes / Vulcan

This is the outer tube shim pad for the side, inside of the wheel lift by Miller Industries. This Shim Pad will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 400 & 600 Series, Holmes 440SL, Vulcan Modular 806, Modular 807, 812 Intruder, and Modular 880/890. See Brochures for reference chart and Features for related hardware. Each pad sold separately.

$5.49

Miller Claw Pivot Pin for Gen 3 Crossbar

This is a replacement claw pivot pin for gen 3 crossbar from Miller.

$230.99

Miller Detent Spring

This Detent Spring from Miller Industries is used in the assembly of crossbars, outer crosstubes, underlifts, wheel lifts, and crossbeams of many different car carriers and wreckers. These include Century, Holmes, and Vulcan Wreckers, as well as, a Vulcan Car Carrier. See the brochures tab for a complete list and part breakdowns.

$23.99