Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
This round, push in style light can be used as a license plate light or a control panel light. It is commonly used on the Mounting and Tilt Frame Assembly of several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0300867.
Buyers Products 5 Inch Incandescent Flood Light has a sealed rubber housing and
a blunt cut connection. It sits on a zinc-plated mount and has a 10 in. lead
length. The 35W light is IP67 rated for water and dust resistance.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker
Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and
Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with
a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held
in place with an allen head bolt and washer on the top.
The All-Grip Fiber Core Winch Cable with Self-Locking Swivel Hook is very strong. With a working load limit of up to 16,563 pounds and a minimum break strength as high as 58,800 pounds, you can rely on this to get the job done. Check the chart below for more information.
The All-Grip Fiber Core Winch Cable with Swivel Hook is very strong. With a working load limit of up to 10,309 pounds and a minimum break strength as high as 36,600 pounds, you can rely on this to get the job done. Check the chart below for more information.
This is a replacement body harness clamp for Century, Champion, and Vulcan Car
Carriers by Miller Industries. This clamp is used in the hose tray and holds
the body harness up out of the way while the bed of the carrier is operating.
To view what models this will fit see Features below. To view the part
schematics click on the Brochure Tab.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This is a stainless steel tail light mounting plate for car carriers. It is for the right hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720031.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.
This Miller Industries product is the right hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the right hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801574.
This is a stainless steel tail light face plate for the left hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or back up alarm pictured in photo. All
that is included is the stainless steel face plate.
This Miller Industries product is the left hand side tail light housing for Century or Vulcan 10, 15, 20 or 30 Series Car Carriers 2005-Current. Its painted black steel shell houses all the left hand side tail light components, as well as the face plate. It bolts onto the mounting bracket (12-0710783) which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0801573.
This Miller Industries product is the right hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the right hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710784) which is
attached to the subframe of the carrier. See features for additional
information.
This is a stainless steel tail light face plate for the right hand side of the
Century Generation II LCG car carriers. The light configuration for this bezel
is horizontal. Does not include lights or license plate mounting hardware as
pictured in photo. All that is included is the stainless steel face plate.
This Miller Industries tail light mounting bracket connects the left hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This Miller Industries tail light mounting bracket connects the right hand tail
like housing to the subframe of the car carrier. It is bolt-on and is painted
steel black. It will work for any Century or Vulcan car carrier. See Features
for additional information.
This is a stainless steel tail light mounting plate for car carriers. It is for the right hand side of the tail light assembly. The mounting holes are cut out vertically, to allow your tail lights to be mounted vertically. This part can be used to replace Part Number 12-0720031.
This 4" Round Back Up Alarm from Miller Industries can be installed in the rear
tail light panel of Century, Champion, and Vulcan Car Carriers. Please see the
brochure tab for a list of breakdowns.
This is a Hose Tray used on 21' bed car carriers by Miller Industries.
This hose tray is 9' long x 3.5" wide. The channel where the hose lays in is
2" wide. This hose tray will fit 21' beds from Century, Champion and Vulcan.
See Features Below to see which models it will fit. This part can be used to
replace Part Number 12-0720283. This part will be cut into three sections in
all cases for economical shipment.
Update the wiring for the exterior DOT lighting on your Century car carrier
with this new harness from Miller Industries. Wiring fits up to 21'6" decks.
Replaces 0302217.
This Miller Industries product is the left hand side tail light housing for
Century or Vulcan LCG Series Car Carriers (Generation I or II). Its painted
black steel shell houses all the left hand side tail light components, as well
as the face plate. It bolts onto the mounting bracket (12-0710783) which is
attached to the subframe of the carrier. See features for additional
information.