0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Maxxima LED Marker Light 2 1/2" Round
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
$7.49
Buyers Round Incandescent Flood Light
Buyers Products 5 Inch Incandescent Flood Light has a sealed rubber housing and
a blunt cut connection. It sits on a zinc-plated mount and has a 10 in. lead
length. The 35W light is IP67 rated for water and dust resistance.
$9.39
Temflex Vinyl Insulating Electrical Tape
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
$2.99
Howes Lubricator and Penetrating Oil 12 oz.
Howes Lubricator heavy-duty, multi-purpose Lubricator and Penetrating Oil is guaranteed to loosen rusted nuts and bolts. The lubricant can be sprayed on wires, leads and distributor caps and is safe to use on almost any surface.
$16.99
Parker Spin On Hydraulic Filter Element
This is our #1 selling filter. It is used on older style 411, 412, 601, 602, 611, 612, 552, 4400, 4800, 301, 311, 312, and 614.
$12.57
Miller Pivot-Style Wheel Lift L-Arm - Formula 1 and 6500 Wheel Lifts
Note: Special Handling Fees Apply for Specific Items
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
This alloy pivot-style L-Arm from Miller Industries fits Formula 1 and Formula 6500 wheel lifts on Century 400 and 600 Series and Challenger 4700 and 4800 Series wreckers. Also known as a tire restraint or wheel retainer, this aluminum L-Arm fits 2" x 3" outer crosstubes and features a scoop style tire pan. The drivers side part can be used to replace Part Nos.: 12-0803648 and 12-0903489 and the passenger side part can be used to replace Part Nos.: 12-0803649 and 12-0903490.
- Option of driver or passenger position
- Fits 2" x 3" outer crosstubes
- Pivot style receivers
- Alloy construction
- Scoop style tire pan
- 4,000-lb. capacity
- Driver side (12-0904156) replaces Part Nos.: 12-0803648 and 12-0903489
- Passenger side (12-0904157) replaces Part Nos.: 12-0803649 and 12-0903490
Fits: - Century 400 Series
- Century 600 Series
- Challenger 4700 Series
- Challenger 4800 Series
$540.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Phoenix 12 Position Junction Box
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
$16.19
Phoenix Left Fender Flare 3" Century 400 and 600 Series
Note: Special Handling Fees Apply
This 3" wide Left Fender Flare from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tire. The flare keeps mud and debris from being thrown onto a nice paint job or on th e towed vehicle. The addition of fender flare will help the truck comply with certain state tire exposure regulations. This fender f lare does not fit the early 401-402 or other straight sided Century bodies.
Cannot ship by Mail.
This 3" wide Left Fender Flare from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tire. The flare keeps mud and debris from being thrown onto a nice paint job or on th e towed vehicle. The addition of fender flare will help the truck comply with certain state tire exposure regulations. This fender f lare does not fit the early 401-402 or other straight sided Century bodies.
Cannot ship by Mail.
- Left Fender Flare
- 3" Wide
- Fits Century 400 & 600 Series Wrecker Bodies
- Here's the finishing touch for your wrecker!
- Custom designed for a perfect fit on a variety of popular wrecker body styles
- Paint-to-match
- Installs in minutes for a clean custom look
$146.99
Phoenix Right Fender Flare 3" Century 400 and 600 Series
Note: Special Handling Fees Apply
This 3" wide Right Fender Flare from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tire. The flare keeps mud and debris from being thrown onto a nice paint job or on t he towed vehicle. The addition of fender flare will help the truck comply with certain state tire exposure regulations. This fender flare does not fit the early 401-402 or other straight sided Century bodies.
Cannot ship by mail.
This 3" wide Right Fender Flare from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tire. The flare keeps mud and debris from being thrown onto a nice paint job or on t he towed vehicle. The addition of fender flare will help the truck comply with certain state tire exposure regulations. This fender flare does not fit the early 401-402 or other straight sided Century bodies.
Cannot ship by mail.
- Right Fender Flare
- 3" wide
- Fits Century 400 & 600 Series Wrecker Bodies
- Doesn't Fit Early 401-402 or Other Straight Sided Century Bodies
- Here's the finishing touch for your wrecker!
- Custom designed for a perfect fit on a variety of popular wrecker body styles
- Paint-to-match
- Installs in minutes for a clean custom look
$146.99
Miller Mud Flap Mounting Angle, Right Side, Century
This Mud Flap Mounting Angle from Miller Industries is assembled on the right
side of Century, Challenger, Champion, Eagle and Holmes Wreckers. Please see
the features below for a list of wreckers and see the brochure tab for
breakdown schematics.
$55.99
Fastenal 1/4" - 28 Grease Fitting w/ Ball Check
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
$0.29
United Abrasives 4" Fast Grinding Wheel For Metal
Mississippi Welders depressed center fast grinding wheel. It has an aluminum oxide grain with a soft bond for fast shock removal. It is used for ferrous metals (iron, steel, welds, etc.) and low grade stainless steel.
$3.99
Miller Jam Nut Hex 3/8" 16 Winch Clutch Control
This Hex Jam Nut from Miller Industries is used on the Winch Clutch Control of
4-Ton Hydraulic Winches,
$0.29
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
