Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This replacement strap ratchet has a durable design that meets or exceeds OEM
specifications and offers a patented double locking mechanism. This 2" wide
handled ratchet comes with a finger hook.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
These Grade 70 Chain Assemblies are 5/16" and include a 15" j-hook at one end
and a grab hook and mini j-hook on the other end. The forged, heat treated
steel has excellent wear and abrasion resistance.
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
This Hydraulic Tee Fitting from Miller Industries is used on the Hydraulics
Assembly of Century, Champion, and Vulcan Car Carriers. See the features below
for a list of assemblies and see the brochure tab for breakdowns.
This Top Half Pivot Pin from Miller Industries is used in the SDU, underlift,
and tower assembly of many Miller Wreckers. These Wreckers include Century,
Challenger and Holmes Wreckers. The Pivot Pin is secured onto the crossbeam
weldment with a screw, washer, and thrust washer. Please see the brochure tab
for a list of breakdowns.
This Hydraulic Elbow Fitting from Miller Industries is used to connect the hose
assembly to the bed extend cylinder on Century 10, 15, 20, and 30 Series Car
Carriers. See the features below for a list of assemblies and see the brochure
tab for breakdowns.
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
This Seal Kit from Miller Industries is used on Wheel Lift Cylinder 12-0303681.
This cylinder is used on Century wreckers with the Formula I and Formula 6500
wheel lifts.
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.