Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Work Light, Oval aluminum housing with a 6 LED flood bulb. 1350 Lumens, shock
resistant, waterproof, and dust resistant. One bolt adjustable mount bracket.
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on
a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part
schematic click on the Brochure tab.
This zinc-plated mild steel L-Arm from Miller Industries fits the drivers side
of Vulcan 850 and 890 series wheel lifts. Sometimes called a tire restraint or
wheel retainer, the 2 square tube includes a stiffener inside for a total
Working Load Limit of 6,000 lbs. This scoop also features adjustment holes for
proper tire fitment, and a grated tire pan for improved grip.
Make your recoveries easier with The RimSling! This synthetic rope sling is
designed slimmer yet has a higher . The RimSling has a protective Cordura
Sleeve over the entire sling giving it maximum protection. Also, it has a
special braid guard at the center of the sling providing extended life. A 6"
sling eye is located on either end of the sling. The RimSling is also Made in
the USA!
Zip's high-quality, low-cost snatch blocks are available in four rope sizes
with working load limits up to 30,000 lbs. These blocks also feature a
spring-loaded latch that adds a layer of safety to the recovery scene. See
the drop-down menu for available sizes and working load limits.
This Lynch Pin from Miller Industries is used on the Mounting and Tilt Frame
Assembly of several Miller Car Carriers. These include Century, Challenger,
Champion, Holmes, and Vulcan. See the features below for a full list of
carriers and see the brochure tab for breakdowns.
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century
211/300 Series, and Holmes 440SL by Miller Industries. They are located on the
top, inside of the outer stinger. See Brochures for reference chart.
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.