Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
The Button Master is a specialty long-reach tool that is specifically-designed
for pulling up vertical buttons. Just loop around the vertical button and pull
it up to open the car.
This window wedge creates a 5/8" starting gap along the door frame and window
of a vehicle, allowing easy access for door tools. Works with any style or brand of door tools.
The All-Grip Fiber Core Winch Cable with Self-Locking Swivel Hook is very strong. With a working load limit of up to 16,563 pounds and a minimum break strength as high as 58,800 pounds, you can rely on this to get the job done. Check the chart below for more information.
Winch Cables can also be known as: winch line, wire rope, wrecker cables, car
carrier cables, and rollback cables. These Fiber Core Winch Cables are made
with Extra Improved Plow Steel, which provides superior strength and
flexibility. When pressure is exerted on the working winch cable, the lubricant
reservoir gives off lubricant to minimize the wear of wire on wire, assuring
longer service life. These winch cables also come with an Alloy Swivel Hook
that has a safety latch for a secure, safe connection. This swivel hook will
rotate as it is reeled into the drum so that it will wrap and lay better.
Zip's high-quality, low-cost snatch blocks are available in four rope sizes
with working load limits up to 30,000 lbs. These blocks also feature a
spring-loaded latch that adds a layer of safety to the recovery scene. See
the drop-down menu for available sizes and working load limits.
These fluorescent pink door tools with glow-in-the-dark tips make nighttime
lockouts easier to see. Snap-on loop and extender accessories available for
extra leverage and reach.
These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.
OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant
pressure against your winch drum, which makes your wire rope wind smoother.
This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000
lb. winches from Ramsey. The tensioner keeps constant pressure against your
winch drum, making your wire rope wind smoother. It's also very easy to install
and it keeps your cable from free spooling.
This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak
es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram
sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used
to replace Part Number 124001329.
This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century,
Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch.
This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16
Series LCGs. This roller fairlead is designed to reduce cable wear, especially
on sharp angle pulls. To view specific models of carrier this fairlead will fit
see Features below. To view part schematics click on the Brochures tab.
This Roller Tensioner Kit from Ramsey Winch Company has been made special for
the H-200 Series Winches used on Century Car Carriers by Miller Industries. It
is Underwound Style only.
Use this Winch Level Winder to tightly respool your unloaded cabled onto the
cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope
from kinking, backlashing and birdnesting by putting constant tension against
the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.
This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
These paintable Cable Tensioners keep constant pressure against your winch drum, allowing your cable to wind more smoothly. Include mounting hardware and instructions.
OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant
pressure against your winch drum, which makes your wire rope wind smoother.
This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.
This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000
lb. winches from Ramsey. The tensioner keeps constant pressure against your
winch drum, making your wire rope wind smoother. It's also very easy to install
and it keeps your cable from free spooling.
This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak
es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram
sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used
to replace Part Number 124001329.
This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century,
Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch.
This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16
Series LCGs. This roller fairlead is designed to reduce cable wear, especially
on sharp angle pulls. To view specific models of carrier this fairlead will fit
see Features below. To view part schematics click on the Brochures tab.
This Roller Tensioner Kit from Ramsey Winch Company has been made special for
the H-200 Series Winches used on Century Car Carriers by Miller Industries. It
is Underwound Style only.
Use this Winch Level Winder to tightly respool your unloaded cabled onto the
cable drum of your wrecker or car carrier winch. Tensioners prevent wire rope
from kinking, backlashing and birdnesting by putting constant tension against
the winch drum. This level winder fits Ramsey model 200 and 300 Series Winches.
This 11" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 10" - 11". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.