0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Buyers Round Incandescent Flood Light
Buyers Products 5 Inch Incandescent Flood Light has a sealed rubber housing and
a blunt cut connection. It sits on a zinc-plated mount and has a 10 in. lead
length. The 35W light is IP67 rated for water and dust resistance.
$9.39
Jerr-Dan Decals Control 5 Position *OLD STYLE*
This is a Jerr-Dan Decal, Control 5 Position. Available for both Right and Left
Hand side.
$32.39
–
$48.79
Buyers Lock Cylinder with Key
Buyers Products Replacement Lock Cylinder with Key for Buyers Products Truck
Box Latches fits the following Buyers Products latches (see "Related Products"
below for more information): L1883, L1980, L8815, L8816, L8816R, L8825, L8835,
L8855, L8915, LL9000, and LL90003.
$6.49
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
RimSling Spliced Eye Synthetic Recovery Slings
Make your recoveries easier with The RimSling! This synthetic rope sling is
designed slimmer yet has a higher . The RimSling has a protective Cordura
Sleeve over the entire sling giving it maximum protection. Also, it has a
special braid guard at the center of the sling providing extended life. A 6"
sling eye is located on either end of the sling. The RimSling is also Made in
the USA!
$129.99
–
$769.99
Lift-All Tuflex Endless Loop Eye Slings
These Eye Slings feature a texturized, abrasion-resistant nylon jacket that
covers the sling body where abrasion is a problem. Maintains the basic Tuflex
features and forms two color-coded lifting eyes. Meets ASME-B30.9 standards
and regulations. Read details on pg. 7 and 8 in brochure.
$17.99
–
$128.99
United Safety Tow Light w/ Case and Female Plug
Our popular SL-9 magnetic tow light kit comes with two sealed beam truck lights
in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all
pre-wired into the male plug. The kit also includes a plastic carrying case
and the female plug. The flexible cable is 16 gauge wire with "Yukon Weather
Proven" outer and inner jackets.
$105.99
All-Grip Replacement Hook Latch
This is a replacement latch for All-Grip hooks. Be sure to check below for which one fits your hook.
$3.99
–
$45.99
Handle Shifter Assembly
Ramsey Winch shifter assembly for RPH-8000 winches. This is a manual operation shifter.
$215.99
Gear Housing End Bearing
This is a replacement brake housing for the RPH-8000 Ramsey Winch Co. Winch.
$256.99
Tork Advanced ShopMax Centerfeed Shop Towels
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
$21.99
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
