Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Temflex vinyl insulating electrical tape. It is flame retardant, lead free,
cold and sunlight resistant, suitable for use at not more than 600V and not
more than 80?C (176?F).
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
Tork Advanced ShopMax Wiper 450 Center-feed shop towels are highly absorbent, offering excellent wipe-dry capabilities. Their strong construction offers durability and the self-dispensing pop-up box offers controlled dispensing. They contain 85% paper content (60% recycled, 40% postindustrial) and 15% synthetic emulsion. Sold in a box of 200.
This 2nd Stage Bolt-On Spacer Pad from Miller Industries is used on the
assembly of several Miller Heavy Duty Wreckers. These include Century and
Challenger Wreckers. The spacer pad is generally used in the underlift and
tower assembly, but it is also used on the LDU Assembly of Century 1140/1130
Wreckers. Please see the features below for a list of trucks and see the
brochure tab for breakdowns.
This Socket Set Screw is made from alloy steel with a black oxide finish. It is
REACH and RoHS compliant. This screw is used on the Wheel Lift and Crossbeam
Assembly of Champion Carriers prior to 2001 and Vulcan 10 Series Carriers from
2003-2005.
This Button Head Screw from Miller Industries is used to screw the stop plates
and slide pads onto boom weldments in many Miller Wrecker assemblies. These
assemblies include wheel lift, SDU, underlift, and tower assemblies on Century,
Challenger, and Holmes wreckers. The screw measures 3/8" diameter x 5/8" long
with a thread size of 24. Please see the brochure tab for a list of breakdowns.
This Stop Plate from Miller Industries is used in the assembly of wheel lifts, SDU, underlifts, and towers for many Miller car carriers and wreckers. Those include Century wreckers, Challenger wreckers, and Challenger, Champion, Holmes and Vulcan car carriers. This stop plate measures 2-5/8" long, 1" tall, and 5/8" wide. Please see the brochure tab for a list of breakdowns This part can be used to replace Part Number HD-106.
This is a replacement spacer pad that bolts to the underside of the underlift
boom to help the boom slide in and out efficiently. This pad is used on
Century and Challenger heavy duty wreckers by Miller Industries. To view
specific models this pad fits see Features below. To view the part schematics
click on the Brochure tab.
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
This is a replacement spacer pad for the second stage of the underlift boom on
Century and Challenger heavy duty wreckers by Miller Industries. This pad bolts
to the underside of the underlift boom. It helps slide the boom in and out
efficiently. It also catches on the wear pad mounting bracket of the next stage
of the underlift boom to slide that section out. To view specific models this
spacer pad fits see Features below. To view the part schematics click on the
Brochure tab.
This is a replacement wear pad used in the recovery boom assembly of heavy duty
wreckers by Miller Industries. This wear pad is used in between the second and
third stages of the wrecker boom and helps prevent damage to the boom
weldments. This wear pad measures 3/4" x 1" x 4". To view the models this pad
will fit see Features below. To view the part schematics click on the Brochure
tab above.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.