0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
B/A Products Safety Chain Clevis Slip Hook G70 (10' ONLY)
This Grade 70 Safety Chain is 5/16" x 10' and includes a heavy duty latched
sling on one end. Carrier safety chains can be used as primary or secondary
securement chains on all types of carriers. All chains are completely zinc
plated and all hooks are forged, heat treated steel.
$51.99
Buyers Circuit Breakers Hi-Amp
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
$25.79
–
$41.29
Allegis Rotary Single Point Locking Paddle Latch
Allegis rotary paddle latch, stainless steel, with holes, keyed 502 with
cylinder loose.
$132.53
3M Acrylic Foam Tape
3M Acrylic Foam Tape 4229P is a 0.76mm thick, medium-density, dark grey acrylic foam double sided adhesive tape with high performance acrylic adhesives. Double Sided Acrylic foam adhesive tape is grey with red polyethylene release liner. General purpose double sided adhesive tape with superior adhesive bonding strength for a wide variety of surfaces. Can be used to stick neodymium magnets to non-ferrous material surfaces like plastic, copper, stainless steel, wood, glass, tiles, concrete as these materials does not work directly with magnets. The acrylic foam of 0.76mm thick allows the adhesive to mould to slightly rough surfaces like concrete.
$1.25
Allegis Corp. Metal End Gas Spring - 7" Stroke
| Item # | Style |
|---|---|
| AC-87120 | 120 lbs. |
| AC-87150 | 150 lbs. |
| AC-8775 | 75 lbs. |
| AC-8790 | 90 lbs. |
$11.69
–
$23.89
Buyers LED Strip Lighting
LED Light Strips are ideal for compartment and cargo work spaces of trucks,
trailers, toolboxes, RV's and more. Space saving low profile design is 1/2"
wide and only 0.2" tall. Self adhesive backing for easy installation on any
surface. Includes clips and screws for alternate mounting. IP68 rated
completely sealed waterproof electronics. 12 volt DC.
$16.89
–
$64.99
Allegis Lock Cylinder and Key
This is a universal lock cylinder and key CH501 from Allegis Corp.
$7.99
.jpg_415.jpeg "ch502-lock-cylinder-ch502-key-web (2)")
Ch502 Key Lock Cylinder
Allegis replacement cylinder lock works for any Allegis D ring lits or like paddle latch even the T-handles.
$7.02
SoundOff Signal 10" LED Cargo Light
LED 90 Degree Corner Mount Strip Light-Glossy white powder coated aluminum
housing with a polycarbonate lens. The housing design allows for clean wire
management behind the light.
$67.99
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
