Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Claw spring for Eagle wheel lifts. This spring is used to pull the claws
towards each other when the wheel lift is unloaded. Attaches to left & right
claws. See Brochures for schematics.
Towbar spring for Eagle wheel lifts. This spring is used to hold the towbar
straight when the wheel lift is unloaded. Attatches to the towbar and to the
inner stinger.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
This is a bronze bushing for an Eagle Best-Lift Forklift Attachment. This bushing is used where the claws of the forklift attachment mounts to the crossbar. You will need two, one for the driver side claw and one for the passenger side claw. The dimensions of this bushing are 3" long with a 1-1/4" outside diameter and a 1" inside diameter. This part can be used to replace Part Number E300002.
This Boom Stinger Pivot Pin from Miller Industries is used in the recovery boom
and wheel lift boom assembly of Eagle EB-2 Modular Wreckers. The Pivot Pin
measures 9-1/2" long, and has a diameter of 1". Please see the brochure tab for
a breakdown.
This crash wrap from Global Film is a heavy duty 4 mil 3-layer CoEx film designed to provide surface and interior protection for a variety of outdoor automotive salvage and towing applications. Special poly-ethylene blend contains 25% metallocene to provide high resistance against puncture and tear. A UV additive offers outdoor protection for up to 60-days. Water based acrylic adhesive system provides instant tack even in demanding outdoor conditions and is safe to use. Simply press one end to the vehicle's surface to start seal/wrap until the area is covered. CW18100P and CW36100P include perforated tear lines every 24", so you only use what you need.
ITI Yellow Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck. These ITI Skates willdrastically reduce the moving resistance, eliminate tire damage and make your operator more efficient and safer. Simply wedge a skate under the tires of the vehicle and begin winching. In times when you are having difficulty wedging the skates beneath the tires or wheels, the large face and durable design of the ITI skate withstands being driven into place with a mallet. These lightweight skates perform well on most surfaces including gravel, asphalt and cement. Also, utilizing skates when loading vehicles will protect the deck of your bed or trailer from damage. A better customer service will be provided because the skates will minimize the scrapes and mars on the driveway or parking lot too!
Note: Special Handling Fees Apply for Specific Items
This painted steel L-Arm from Miller Industries fits the wheel lifts on various
models of Century, Holmes and Vulcan wreckers. Otherwise known as a tire
restraint or wheel retainer, this L-Arm fits the crosstubes on the driver side.
This part can be used to replace Driver Side Part Nos. 12-00803911 and
12-0803911 & Passenger Side Part Nos.12-00803912 and 12-0803912.
Option of driver or passenger position
Painted steel
Driver side (12-0806978) replaces driver side Part Nos. 12-00803911 and
12-0803911
This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger
I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts
('01 and older). This kit includes one
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lift. Design built after March 1996 up to August 2000. Includes (1) 12-0801073
Pivot Pin, (1) 12-0303403 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and
(2) 12-0701956 Pivot Pin Retaining Bolts.
Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lift. Latest design built after August 2000. Includes (1) 12-0801073 Pivot Pin,
(1) 12-0306879 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and (2)
12-0701956 Pivot Pin Retaining Bolts.
These skates make loading and unloading disabled vehicles easier with a groove in the middle to accommodate brake rotors or vehicles without wheels. Interlocking plastic skates cause vehicles to glide towards the pull, with or without wheels, whether loading or unloading a carrier or removing a car from a tight parking space.
This Screw from Miller Industries is used in the wheel lift, under lift, and
boom assembly of Miller Car Carriers and Wreckers. This includes Century
Carriers and Wreckers, Challenger Wreckers, Eagle Wreckers, and Holmes
Wreckers. The screw measures 1/2" x 1" with a thread size of 13. Please see the
brochure tab for a list of breakdowns.
This Thrust Washer from Miller Industries is used in the boom, underlift, and
wheel lift assembly of Miller Wreckers. These wreckers include Century,
Challenger, Champion, Eagle, and Holmes Wreckers. The washer measures 5" in
diameter, 1" wide, and 1/16" thick. Please see the brochure tab for a list of
breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.