Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Buyers Products 5 Inch Incandescent Flood Light has a sealed rubber housing and
a blunt cut connection. It sits on a zinc-plated mount and has a 10 in. lead
length. The 35W light is IP67 rated for water and dust resistance.
This zinc-plated slide-in L-Arm fits the wheel lifts on various
models of Century, Holmes and Challenger wreckers and Century, Champion,
Challenger and Vulcan car carriers.
Note: Special Handling Fees Apply for Specific Items
This zinc-plated mild steel L-Arm from Miller Industries fits the Vulcan 10
Series car carriers and 800 Series light-duty wheel lifts with option of driver
or passenger side fit. Sometimes called a tire restraint or wheel retainer, the
2 x 2.5 tube is designed to work with the driver side outer crosstube 8800900.
This strapless system offers a Working Load Limit of 4,000 lbs. This scoop also
features adjustment holes for proper tire fitment and a grated pan for improved
grip.
2 x 2.5 aluminum tube
Opton of driver or passenger positioning
Adjustment holes
Grated scoop tire pan
Use with 8800900 outer crosstube
WLL: 4,000 lbs.
Fits:
2003-Current Vulcan 10 Series Steel & Aluminum Carriers
2001-Current Vulcan 10 Series Extreme Angle Steel Carriers
This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker
Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and
Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with
a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held
in place with an allen head bolt and washer on the top.
This Detent Kit from Zip's will help to keep the crossbar straight. It fits
Vulcan style crossbars, Vulcan Car Carrier Wheel Lifts, and Century Car Carrier
Wheel Lifts with Vulcan crossbars. The kit includes a ball, spring, washers,
and a threaded plug.
This is the Wheel Lift Tilt Cylinder Lower Pin on the Vulcan 880 / 890 Series
and the Vulcan 896 / 897 Series light duty wreckers by Miller Industries. This
pin is also used to attach the wrecker boom lift cylinder to the subframe
weldment on the Vulcan 896 / 897 Series wrecker. To see which specific wrecker
models this pin will fit please see Features below. To view the part schematics
click on the Brochure tab.
This is the Wheel Lift Tilt Cylinder Upper Pin on the Wheel Lift of a Century
Modular 400 & 600 Series, Vulcan 880/890, Vulcan Modular 880/890 and the Vulcan
896/897 Series light duty wreckers by Miller Industries. This pin connects the
wheel lift's tilt cylinder to the wheel lift frame weldment. To view which
wrecker models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
This is the Upper Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890
Series and the Modular 880 / 890 Series light duty wreckers by Miller
Industries. This is the upper pin and it goes through the base end of the
cylinder. This cylinder connects the lift cylinder to the wheel lift tilt
column weldment. To see which specific wrecker models this pin will fit please
see Features below. To view the part schematics click on the Brochure tab.
This is the Wheel Lift Extend Cylinder Rear Pin for the Vulcan 800 Series light
duty wreckers by Miller Industries. This includes the 880 / 890 Series, Modular
880 / 890 Series and the 896 / 897 Series. This pin is used to connect the
wheel lift extend cylinder to the wheel lift inner boom weldment. To see which
specific wrecker models this pin fits please see Features below. To view the
part schematics click on the Brochure tab.
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890
Series and the Modular 880 / 890 Series light duty wreckers by Miller
Industries. This is the lower pin and it goes through the rod end of the
cylinder. This cylinder connects the lift cylinder to the wheel lift outer boom
weldment. To see which specific wrecker models this pin will fit please see
Features below. To view the part schematics click on the Brochure tab.
This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 880 / 890
Series and the Modular 880 / 890 Series light duty wreckers by Miller
Industries. This pin is used to connect the wheel lift extend cylinder to the
wheel lift outer boom weldment. To see which specific wrecker models this pin
fits please see Features below. To view the part schematics click on the
Brochure tab.
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
This is a wear pad retainer plate on the up/down portion of the wheel lift by
Miller Industries. It is bolted on by 3 bolts. This retainer plate fits the
following wreckers: Vulcan 880/890, Modular 880/890, and 896/897. See Features
for related hardware and Brochures for reference charts.
This is a spacer bar that is located on the top, inside of the wheel lift outer
stinger weldment by Miller Industries. This spacer bar will fit on the
following wreckers: Vulcan 880/890, 805, 806, Modular 880/890, 896/897. See
features for related hardware and see brochures for reference charts.
This is a control rod bushing SSB-625 for the wheel lift on the Vulcan 880 and
890 Series wreckers by Miller Industries. See Features for related wreckers and
Brochures for reference charts.