Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
These Grade 70 Chain assemblies are 5/16" and include a 15" j-hook at one end and a grab hook, r-hook, t-hook and mini j-hook on the other end. The forged, heat treated steel has excellent wear and abrasion resistance.
The Button Master is a specialty long-reach tool that is specifically-designed
for pulling up vertical buttons. Just loop around the vertical button and pull
it up to open the car.
This 12-count package of replacement long-reach tool tips is a must have item
for any professional. Place a few back-up tips in your Store-N-Go handle and save the rest for future use. Fits most
Access Tools Long-Reach Tools, including the most popular Quick Max.
Winch Cables can also be known as: winch line, wire rope, wrecker cables, car carrier cables, and rollback cables. The Elite Series winch cables from AW Direct provide strength and flexibility.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
This Inflatable Air Wedge is specially designed to apply slow, damage-free
pressure to create the necessary gap for door tools. Internal stiffener keeps
the bag rigid, making it easy to slide over tight weather stripping. One-hand
push button release valve allows for easy operation.
ITI Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.
In The Ditch now has Galvanized Steel Trash Cans. Made from galvanized steel, these trash cans are guaranteed to last for years. You can choose from a 6 gallon trash can or a 4 gallon trash can. Each of these sizes comes with a lid included. The 4 gallon trash can and lid can be used to replace miller part number 124002700.
The JNC660 portable jump pack delivers 1700 Peak Amps and 425 Cranking Amps of
starting power and weighs just 18 lbs. This convenient and reliable JNC
starting pack is perfect for a variety of professional starting environments,
including automotive service, fleet service, auto dealerships, auto auctions,
marinas, implement dealerships and more. Give it a try and you'll see why it's
the choice of Pros the world around. Built tough, Jump-N-Carry products lead
the way when it comes to power-per-pound, resulting in no compromise between
the words portable and power.
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
Endless synthetic slings are made from a continuous loop of polyester and jacketed in a double layer of polyester. Internal red warning fibers alert you of damage should the sling become torn or damaged.
These Snatch Blocks have a Swivel Shackle attached to a chain. The chain also
has a Grab Hook attached at the end of it. Use snatch blocks to change the
direction or gain a mechanical advantage over the load being moved. B/A's
snatch blocks all feature bronze bushings with grease fittings.
These Tie-Down Systems are simple to install, yet provides a secure, damage
free tie-down. Systems don't touch a vehicle's suspension, chassis or body,
thereby preventing any damage that might occur when using chains. Kits are
completely adjustable to fit any car or truck tire size. It is also available
in any strap length and hook combination. This system includes: four 14' or 18'
long straps with chain ends, four short straps with lined eyes and four
ratchets
with chains . The 18' length strap is perfect for larger
wheels and tires found on pick-ups and SUV's.
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
This 2.4GHz wireless tow light system comes with a light bar, transmitter and a charge cord. Simply plug the seven pin transmitter into your trucks seven pin connector. Turn on the truck bar by switching the on/off button. The taillight do not come on when the unit is powered on, only when the towing vehicles taillights are on. This is a tremendous battery saver. Once the transmitter is transmitting the bar will do what the truck instructs it to do. (Left or Right turn, Stop or Taillights) Light bars feature all L.E.D. lights, transmits up to 1000ft with a runtime of about 20 hours. If you forget to charge the bar, just plug in your 7 pin cable to run as a cabled unit. We offer a 3-year warranty on the circuit boards.
Replace any damaged or misplaced end caps on your TowMate Tow Lights with this
Black End Cap. This end cap can be used on TM2,TM22, TM21, TL31, TL48, or TM360
lights. End caps from TowMate are also available in Clear with Red LED
for side marker illumination.
This Rocker Switch from TowMate I used on lighting systems and can easily
control your non Power-Link lights. Install into your dash along with the
existing controls for clean, factory look.
This Rocker Switch from TowMate I used on lighting systems and can easily
control your non Power-Link lights. Install into your dash along with the
existing controls for clean, factory look.
This Standard 7-PIN RV Style Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This Standard Hardwired Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. A hardwire transmitter can be hardwired into your tow light so you do not have to plug it in every time. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicated the most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
Replace any damaged or misplaced end caps on your TowMate Tow Lights with this
Black End Cap. This end cap can be used on TM2,TM22, TM21, TL31, TL48, or TM360
lights. End caps from TowMate are also available in Clear with Red LED
for side marker illumination.
Prevent scratches to customers' vehicles when using tow lights with these Rubber Magnet Boot Covers. Made from heavy-duty rubber, these covers fit all 3" to 3-1/4" dia. round magnets.
These powerful 90 lb. pull magnets are all you need to secure your wireless tow light to the load you are hauling. They do not come with a rubber boot for anti-scratch protection.
Towmate's iMon Monitoring System- You will never have to worry about losing your
lights again with this easy to use interactive monitoring System. Operates with
any system equipped with iMon electronics. Purchase with a new unit or upgrade
your existing one easily to work with the iMon.
Monitor the functions of your light bar (LEFT TURN, RIGHT TURN, STOP, and
HAZARDS), be alerted when you leave your light bar behind (signal Strength from
wireless light bar), and monitor the battery level of your light bar all with
one easy to use device. Simply plug your iMon into your vehicles cigarette
lighter and be 100% aware of your wireless light bar abilities and location.
Towmate's "Short Range Monitor" can be mounted in the TM2 towlight to monitor
the signal. If the signal is lost then an alarm will sound to alert you of your
towlight not working properly or you have left it on the vehicle you just
towed.
These Rubber Boots from TowMate are the perfect fit for your TM-MAG90 magnet.
It provides your TM-MAG90 magnet with a reliable scratch proof mounting option
for your wireless tow lights.
This Standard 4-PIN Round Transmitter from TowMate is used on TowMate Tow
Lights that do not use an external antenna. This transmitter does not have an
antenna and the electronics are injection molded to ensure that it will resist
the elements. If you are purchasing a transmitter for an existing light, you
will want to match the wire colors of the transmitter and receiver. A red wire
indicates the newest and most current series of electronics & will work with
the I-MON monitor; a green wire indicates an older style prior to the series of
electronics (Doesn't work with I-MON). Please check your wire, and choose your
color before ordering. Not sure which transmitter you need give one of our
Customer Services Reps a call @ (800) 222-6047 and they will be able to get you
what you need.
Extension tow light cable assembly for use with tow light bars or as an
extension for those "long loads." Use with tow light bar part number(s) 1100,
1100P, 1110, and 1100P-48.
This Standard 7-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This is a Zip's Custom Towlight Hanger Bracket. You are able to store your
towlight when it is not in use. With this bracket you are able to customize
your toolbox by efficiently utilizing the space in your toolbox. This towlight
hanger bracket is designed to be used on the heavy duty wreckers.
This Suction Cup Kit from TowMate provides you with a conversion from magnetic
to suction cup base for tows requiring you to mount to a non-magnetic surface.
These fully adjustable suction cups provide a solid hold with their
press-and-lock base.
This Rocker Switch from TowMate I used on lighting systems and can easily
control your non Power-Link lights. Install into your dash along with the
existing controls for clean, factory look.
This Standard 7-PIN RV Style Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This Standard Hardwired Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. A hardwire transmitter can be hardwired into your tow light so you do not have to plug it in every time. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicated the most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
Replace any damaged or misplaced end caps on your TowMate Tow Lights with this
Black End Cap. This end cap can be used on TM2,TM22, TM21, TL31, TL48, or TM360
lights. End caps from TowMate are also available in Clear with Red LED
for side marker illumination.
Prevent scratches to customers' vehicles when using tow lights with these Rubber Magnet Boot Covers. Made from heavy-duty rubber, these covers fit all 3" to 3-1/4" dia. round magnets.
These powerful 90 lb. pull magnets are all you need to secure your wireless tow light to the load you are hauling. They do not come with a rubber boot for anti-scratch protection.
Towmate's iMon Monitoring System- You will never have to worry about losing your
lights again with this easy to use interactive monitoring System. Operates with
any system equipped with iMon electronics. Purchase with a new unit or upgrade
your existing one easily to work with the iMon.
Monitor the functions of your light bar (LEFT TURN, RIGHT TURN, STOP, and
HAZARDS), be alerted when you leave your light bar behind (signal Strength from
wireless light bar), and monitor the battery level of your light bar all with
one easy to use device. Simply plug your iMon into your vehicles cigarette
lighter and be 100% aware of your wireless light bar abilities and location.
Towmate's "Short Range Monitor" can be mounted in the TM2 towlight to monitor
the signal. If the signal is lost then an alarm will sound to alert you of your
towlight not working properly or you have left it on the vehicle you just
towed.
These Rubber Boots from TowMate are the perfect fit for your TM-MAG90 magnet.
It provides your TM-MAG90 magnet with a reliable scratch proof mounting option
for your wireless tow lights.
This Standard 4-PIN Round Transmitter from TowMate is used on TowMate Tow
Lights that do not use an external antenna. This transmitter does not have an
antenna and the electronics are injection molded to ensure that it will resist
the elements. If you are purchasing a transmitter for an existing light, you
will want to match the wire colors of the transmitter and receiver. A red wire
indicates the newest and most current series of electronics & will work with
the I-MON monitor; a green wire indicates an older style prior to the series of
electronics (Doesn't work with I-MON). Please check your wire, and choose your
color before ordering. Not sure which transmitter you need give one of our
Customer Services Reps a call @ (800) 222-6047 and they will be able to get you
what you need.
Extension tow light cable assembly for use with tow light bars or as an
extension for those "long loads." Use with tow light bar part number(s) 1100,
1100P, 1110, and 1100P-48.
This Standard 7-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This is a Zip's Custom Towlight Hanger Bracket. You are able to store your
towlight when it is not in use. With this bracket you are able to customize
your toolbox by efficiently utilizing the space in your toolbox. This towlight
hanger bracket is designed to be used on the heavy duty wreckers.
This Suction Cup Kit from TowMate provides you with a conversion from magnetic
to suction cup base for tows requiring you to mount to a non-magnetic surface.
These fully adjustable suction cups provide a solid hold with their
press-and-lock base.