Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
B/a Products replacement "dog bone" strap are featured in many tiedown systems.
These straps feature reinforced eyes and abrasion resistant edged webbing.
Use this pry-style tool to create enough
space to easily insert an Air Wedge without damaging the vehicle. Flip it
over to use the traditional wedge-shaped handle. A rubber pivot provides
leverage to create working room to insert the Air Wedge. After using
this tool, you will never go back to a traditional wedge again.
The Super Air Jack from Access Tools is the industry's best. The bladder is made out
of ballistic nylon, not rubber, which is important because rubber stretches and
nylon doesn't. The air wedge is meant for smaller vehicles. A built-in
stiffener further aids insertion by preventing the wedge from bending.
AW Direct Wheel Lift Strap with a D-Ring is perfect for securing vehicles on a
wheel lift of a tow truck. This durable strap is available in six lengths and
features abrasion-resistant webbing. This strap has a width of 2" and can be
used in many other securement applications.
Winch Cables can also be known as: winch line, wire rope, wrecker cables, car carrier cables, and rollback cables. The Elite Series winch cables from AW Direct provide strength and flexibility.
These Grade 70 Safety Chain assemblies are 5/16" include a grab hook at one end
and an r-hook, t-hook and mini j-hook on the other end. Carrier safety chains
can be used as primary or secondary securement chains on all types of carriers.
All chains are completely zinc plated and all hooks are forged, heat treated
steel.
This is a replacement custom snap button for the Speed Dolly aluminum
telescoping axles by In The Ditch. This button is made from stainless steel to
help prevent against corrosion.
Maxxima M09300 Series of P2PC Combination Mini-Clearance Marker Lights. Each
Light Comes With An Attached Grommet For Quick Mounting. 3 SMD LED's Provide
Superior Light Output Meeting PC Requirements.
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
These Eye Slings feature a texturized, abrasion-resistant nylon jacket that
covers the sling body where abrasion is a problem. Maintains the basic Tuflex
features and forms two color-coded lifting eyes. Meets ASME-B30.9 standards
and regulations. Read details on pg. 7 and 8 in brochure.
This 22" Wireless Tow Light from TowMate is known as the "Lime Light" because
of its lime color. The Lime Light is TowMate's best-selling wireless tow light.
It has 14 LED's that provide stop, turn, and tail signals wirelessly. This
basic unit is not compatible with an I-Mon reminder system. It comes with two
90 lb. pull magnets that have rubber boots, making it easy to mount just about
anywhere. Choose from any transmitter at no additional charge. The transmitter
options include 4-PIN Round (Standard), 4 PIN Flat, 6 PIN Round, 7 PIN Round, 7
PIN RV Style, and a Hardwire Transmitter. If you're looking for style, savings,
and dependability, then this tow light is for you.
This 2.4GHz wireless tow light system comes with a light bar, transmitter and a charge cord. Simply plug the seven pin transmitter into your trucks seven pin connector. Turn on the truck bar by switching the on/off button. The taillights do not come on when the unit is powered on, only when the towing vehicles taillights are on. This is a tremendous battery saver. Once the transmitter is transmitting the bar will do what the truck instructs it to do. (Left or Right turn, Stop or Taillights) Light bars feature all L.E.D. lights, transmits up to 1000ft with a runtime of about 20 hours. If you forget to charge the bar, just plug in your 7 pin cable to run as a cabled unit. We offer a 3-year warranty on the circuit boards.
36" Wide
Rubber Strap Mounting
7 Pin connection
Comes with transmitter, 12V Charger and port covers
Run times from 12-30 Hours
1000 Foot line of site visibility
Charger indicator Light
Individually serialized and programmed to eliminate cross talk between other units
This Suction Cup Kit from TowMate provides you with a conversion from magnetic
to suction cup base for tows requiring you to mount to a non-magnetic surface.
These fully adjustable suction cups provide a solid hold with their
press-and-lock base.
This Rocker Switch from TowMate I used on lighting systems and can easily
control your non Power-Link lights. Install into your dash along with the
existing controls for clean, factory look.
This Standard 7-PIN RV Style Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This Standard Hardwired Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. A hardwire transmitter can be hardwired into your tow light so you do not have to plug it in every time. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicated the most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
Replace any damaged or misplaced end caps on your TowMate Tow Lights with this
Black End Cap. This end cap can be used on TM2,TM22, TM21, TL31, TL48, or TM360
lights. End caps from TowMate are also available in Clear with Red LED
for side marker illumination.
Prevent scratches to customers' vehicles when using tow lights with these Rubber Magnet Boot Covers. Made from heavy-duty rubber, these covers fit all 3" to 3-1/4" dia. round magnets.
These powerful 90 lb. pull magnets are all you need to secure your wireless tow light to the load you are hauling. They do not come with a rubber boot for anti-scratch protection.
Towmate's iMon Monitoring System- You will never have to worry about losing your
lights again with this easy to use interactive monitoring System. Operates with
any system equipped with iMon electronics. Purchase with a new unit or upgrade
your existing one easily to work with the iMon.
Monitor the functions of your light bar (LEFT TURN, RIGHT TURN, STOP, and
HAZARDS), be alerted when you leave your light bar behind (signal Strength from
wireless light bar), and monitor the battery level of your light bar all with
one easy to use device. Simply plug your iMon into your vehicles cigarette
lighter and be 100% aware of your wireless light bar abilities and location.
Towmate's "Short Range Monitor" can be mounted in the TM2 towlight to monitor
the signal. If the signal is lost then an alarm will sound to alert you of your
towlight not working properly or you have left it on the vehicle you just
towed.
These Rubber Boots from TowMate are the perfect fit for your TM-MAG90 magnet.
It provides your TM-MAG90 magnet with a reliable scratch proof mounting option
for your wireless tow lights.
This Standard 4-PIN Round Transmitter from TowMate is used on TowMate Tow
Lights that do not use an external antenna. This transmitter does not have an
antenna and the electronics are injection molded to ensure that it will resist
the elements. If you are purchasing a transmitter for an existing light, you
will want to match the wire colors of the transmitter and receiver. A red wire
indicates the newest and most current series of electronics & will work with
the I-MON monitor; a green wire indicates an older style prior to the series of
electronics (Doesn't work with I-MON). Please check your wire, and choose your
color before ordering. Not sure which transmitter you need give one of our
Customer Services Reps a call @ (800) 222-6047 and they will be able to get you
what you need.
Extension tow light cable assembly for use with tow light bars or as an
extension for those "long loads." Use with tow light bar part number(s) 1100,
1100P, 1110, and 1100P-48.
This Standard 7-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This is a Zip's Custom Towlight Hanger Bracket. You are able to store your
towlight when it is not in use. With this bracket you are able to customize
your toolbox by efficiently utilizing the space in your toolbox. This towlight
hanger bracket is designed to be used on the heavy duty wreckers.
This Suction Cup Kit from TowMate provides you with a conversion from magnetic
to suction cup base for tows requiring you to mount to a non-magnetic surface.
These fully adjustable suction cups provide a solid hold with their
press-and-lock base.
This Rocker Switch from TowMate I used on lighting systems and can easily
control your non Power-Link lights. Install into your dash along with the
existing controls for clean, factory look.
This Standard 7-PIN RV Style Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This Standard Hardwired Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. A hardwire transmitter can be hardwired into your tow light so you do not have to plug it in every time. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicated the most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
Replace any damaged or misplaced end caps on your TowMate Tow Lights with this
Black End Cap. This end cap can be used on TM2,TM22, TM21, TL31, TL48, or TM360
lights. End caps from TowMate are also available in Clear with Red LED
for side marker illumination.
Prevent scratches to customers' vehicles when using tow lights with these Rubber Magnet Boot Covers. Made from heavy-duty rubber, these covers fit all 3" to 3-1/4" dia. round magnets.
These powerful 90 lb. pull magnets are all you need to secure your wireless tow light to the load you are hauling. They do not come with a rubber boot for anti-scratch protection.
Towmate's iMon Monitoring System- You will never have to worry about losing your
lights again with this easy to use interactive monitoring System. Operates with
any system equipped with iMon electronics. Purchase with a new unit or upgrade
your existing one easily to work with the iMon.
Monitor the functions of your light bar (LEFT TURN, RIGHT TURN, STOP, and
HAZARDS), be alerted when you leave your light bar behind (signal Strength from
wireless light bar), and monitor the battery level of your light bar all with
one easy to use device. Simply plug your iMon into your vehicles cigarette
lighter and be 100% aware of your wireless light bar abilities and location.
Towmate's "Short Range Monitor" can be mounted in the TM2 towlight to monitor
the signal. If the signal is lost then an alarm will sound to alert you of your
towlight not working properly or you have left it on the vehicle you just
towed.
These Rubber Boots from TowMate are the perfect fit for your TM-MAG90 magnet.
It provides your TM-MAG90 magnet with a reliable scratch proof mounting option
for your wireless tow lights.
This Standard 4-PIN Round Transmitter from TowMate is used on TowMate Tow
Lights that do not use an external antenna. This transmitter does not have an
antenna and the electronics are injection molded to ensure that it will resist
the elements. If you are purchasing a transmitter for an existing light, you
will want to match the wire colors of the transmitter and receiver. A red wire
indicates the newest and most current series of electronics & will work with
the I-MON monitor; a green wire indicates an older style prior to the series of
electronics (Doesn't work with I-MON). Please check your wire, and choose your
color before ordering. Not sure which transmitter you need give one of our
Customer Services Reps a call @ (800) 222-6047 and they will be able to get you
what you need.
Extension tow light cable assembly for use with tow light bars or as an
extension for those "long loads." Use with tow light bar part number(s) 1100,
1100P, 1110, and 1100P-48.
This Standard 7-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
This is a Zip's Custom Towlight Hanger Bracket. You are able to store your
towlight when it is not in use. With this bracket you are able to customize
your toolbox by efficiently utilizing the space in your toolbox. This towlight
hanger bracket is designed to be used on the heavy duty wreckers.