Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
This round, push in style light can be used as a license plate light or a control panel light. It is commonly used on the Mounting and Tilt Frame Assembly of several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0300867.
The pros know that you don't mess around when it comes to brakes. FVP Brake Cleaner meets or exceeds OE quality with a price so competitive it will stop you in your tracks. FVP Non-Chlorinated Brake Part Cleaner removes oil, grease, brake fluid and containments quickly, with no residue.
Phoenix electrical junction blocks are high-quality, easy-to-use terminal
blocks that allow you to connect multiple electrical sources in your car,
truck, trailer, or RV. They feature a two-piece design and are available with a
range of poles to accommodate a variety of wiring requirements. These blocks
ensure that your wires stay in place and don't contact other leads, keeping all
of your electrical devices organized and safe from short circuiting.
Available in Classic or Tower's Edge webbing these auto tie-down straps come
with a three hook cluster attached at one end, giving you multiple hook up
options. The clusters include a Mini J-Hook, R-Hook and a
T-Hook.
This is a Bed Pivot Pin from Miller Industries that is used on the bed of car
carriers. It measures 38" long and has a diameter of 1-1/4". This Pivot Pin is
used in the tilt frame assembly of many Century, Challenger, Champion, Holmes,
and Vulcan Car Carriers. Please see the brochure tab for a list of breakdowns.
This Tilt Pivot Weldment from Miller Industries is used on the Tilt Frame Assembly of Champion and Vulcan 10 Series car Carriers. See the brochure tab for breakdowns.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
This straight grease fitting is used to dispense grease into a mating part using a grease gun. It is made from steel with a zinc finish and comes with a ball check. This part has replaced part number
This is a Miller Industries Decal Plate for the passenger side control box
hood. It is designed for all Century/Vulcan Car Carriers prior to 2005
(Excluding LCG). It labels all the levers of a 5-spool system.
This is a Miller Industries Decal Plate for the driver side control box hood.
It is designed for all Century/Vulcan Car Carriers (Excluding LCG). It labels
all the levers of a 5-spool system.
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
This is a replacement lift cylinder pin on the bed of most car carriers.
This pin will fit the Century 10, 15, and 20 Series Carriers, the Champion
Aluminum and Steel Carriers, the Challenger Aluminum and Steel Carriers, the
Holmes Aluminum and Steel Carriers, and the Vulcan 10 and 15 Series Carriers
along with the Extreme Angle carriers.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.