Refine Your Search
- Material Type
-
- Brand
-
-
-
-
- Application Type
-
-
-
- Wheel Lift Components
-
- Boom Equipment
-
- Shelf/Accessory Type
-
- Snatch Block Type
-
Your Filters
Your Filters:
53 Results For "miller sheave"
Sort by
Loading...
Loading...
Miller DTU Recovery Sheave Kit
One of the many new features of the Holmes DTU Gen 2 is the increased height of
the underlift. This increase in height is obtained by using the elevation
cylinders from the Century4024, which were adapted from the Century 1624
Transporter. There is now a sheave attachment created to use the underlift as a
lifting device. This attachment mounts easily to the pintle hook attachment and
allows you to have a feature no other detachable unit offers.
$850.99
2000 Sheavew/ Axle For Side Pu
This is a 2000 Sheavew/ axle for sale from Miller Industries.
$237.99
Miller Drag Winch, Planetary, 2 Speed, 3/4" x 250'
50,000 lbs. Planetary 2-Speed, Drag Winch with 3/4" x 250' Cable w/Release
Tensioner & Sheave Head.
$23,044.99
Miller Drag Winch, Planetary, 2 Speed, 5/8" x 200'
35,000 lbs. Planetary 2-Speed, Drag Winch with 5/8" x 200' Cable w/Release
Tensioner & Sheave Head. As Factory.
$19,720.99
Miller Drag Winch, Planetary, 2 Speed, 3/4" x 250'
50,000 lbs. Planetary 2-Speed, Drag Winch with 3/4" x 250' Cable w/Release
Tensioner & Sheave Head.
$21,203.99
Miller Dual 35,000 Lb. Drag Winches
Dual 35,000# Planetary 2-Speed, Drag Winch with 5/8" x 200' Cable w/Release
Tensioner & Sheave Head.
$38,772.99
McKissick Evolution Series Snatch Blocks Miller Exclusive
The 420 Champion Series snatch blocks from McKissick are perfect for heavy duty rigging
operations because they greatly improve your winches function and pulling
power. The hooks and side plates are made from forged alloy steel that is also
heat treated. This makes the blocks exceptionally durable while keeping them as
light as possible. Each of these sizes will fit a 3/4" - 7/8" wireline. The
opening feature permits the insertion of a rope line while the block is
suspended from a gin-pole. The side plates on these snatch blocks have been
designed to eliminate the possibility of a rope jamming.
$1,374.99
–
$2,221.99
Zip's Rear Carrier Toolbox Kits
Maximize your storage and enhance the functionality of your Miller car carrier with the Zips Rear Carrier Tool Box Kit. Bolting onto rear subframe of 16, 12 and 10 series Miller car carriers, it is great for added storage. It also integrates easily with all control station configurations and air-free spools mounted to the control housing.
$297.87
–
$2,499.99
Miller Sheave, 8" x 1-1/2"
This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2".
This sheave is used on the Boom Assembly of many Century, Challenger, Holmes,
and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies
and parts schematics.
$206.99
Miller Sheave Casting, 6" (Was 9050504)
This Sheave Casting from Miller Industries is used in the Boom Swivel Assembly of Century, Holmes, and Vulcan Wreckers. This pulley
measures 6" in diameter, 1" wide, and it has a 1" diameter hole. Please see the brochure tab for a list of breakdowns. This part can
be used to replace Part Numbers: 9050504 and 7766200.
$56.99
Miller Sheave, 10" x 1.5
This Sheave from Miller Industries has a diameter of 10". The middle hole has a
diameter of 1.5" and the width is also 1.5"
$408.99
Miller Sheave, 1-3/16" Bore, Century Midnight Express and Holmes 440 and 480
This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 -
Current), and it will also fit on the Modular Midnight Express (2010 - Current)
as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480
Wreckers.
$49.24
Miller Sheave, 12", Century and Vulcan Wreckers
This 12" Sheave from Miller Industries is used on the Extension System and Boom
Assembly of several Miller Wreckers. These include Century, Challenger and
Vulcan Wreckers. Please see the features below for a list of wreckers and see
the brochure tab for breakdowns.
$540.99
Miller Sheave Housing Assembly Century / Holmes / Vulcan
This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.
$420.99
Miller Sheave Casting, 6",Replaced by 805180002
This part number has been replaced by part number
$198.99
Miller Boom Sheave Yoke Shaft Century Midnight Express and Holmes 440 HP
This is the Boom Sheave Yoke Shaft for Century Midnight Express and Holmes 440
HP Wreckers by Miller Industries. It will also fit the Century Modular Midnight
Express. This is the Shaft that holds the sheave in the boom end yoke. See
Brochures for reference charts and Features for related parts and what models
this shaft will work with.
$35.45
Miller Boom Sheave Yoke Century Midnight Express and Holmes 440 HP
This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP
Wrecker by Miller Industries. It will also fit on the Modular Midnight Express.
This boom sheave yoke holds the sheave which helps guide your cable from the
winch to the boom. See Brochures for reference charts and Features for related
parts and models this part will fit.
$227.99
Miller Boom End Sheave Shaft Century and Challenger
This is a replacement shaft that attaches the boom end sheave to the boom end
swivel weldment on Century and Challenger heavy duty wreckers by Miller
Industries. This is the shaft the sheave spins on while the winch cable goes in
or out. To see which models this shaft fits see Features below. To view the
part schematics click on the Brochure tab.
$73.99
Miller Boom End Sheave 6" Century / Challenger / Champion / Holmes
This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes
Light Duty Wreckers by Miller Industries. See Brochures for part schematics and
Features for related parts and to see what models this boom end sheave will
fit.
$128.99
Miller Boom End Sheave Shaft Century / Challenger / Holmes
This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and
Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference
charts and Features for related parts and wrecker models this shaft will fit.
$68.99
Miller Boom End Sheave Shaft, Heavy Duty Wreckers
This is a replacement shaft the holds the sheave into the boom end swivel
weldment on the boom of your wrecker. This shaft fits Century, Challenger and
Holmes heavy duty wreckers by Miller Industries. To see which specific models
this shaft will fit, see Features below. To view the part schematics click on
the Brochure tab.
$109.99
Miller Boom End Sheave Shaft Retainer Century / Challenger / Champion / Holmes
This is a replacement boom end sheave shaft retainer for light duty wreckers by
Miller Industries. This retainer mounts to the boom end swivel and secures the
sheave shaft in place. It secures the shaft by sliding into a groove cut into
the shaft, which prevents the shaft from moving. To view which models this
retainer will fit please see Features below. To view the part schematics,
please click on the Brochure tab above.
$9.49
Miller Mounting Pin Miller Small Wrecker Delta Rings
Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.
$27.19
Miller Century 300 Series Holmes 440SL and Vulcan 807/ 810 Small Grooved Sheave
This is a 2 Groove small sheave for the hydraulic hoses on the outer stinger
weldment for a Vulcan 807/810, Century 300 Series, and Holmes 440SL by Miller
Industries. See brochures for reference chart and see Features for related
parts.
$69.99
Miller Boom End Assembly Century / Challenger / Holmes
The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series
Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.
$489.99
Miller Boom End Swivel Century / Challenger / Holmes
This is the Boom End Swivel for many light duty wreckers by Miller Industries.
It will fit on most Century, Challenger, Champion and Holmes wreckers. See
Brochures for a reference chart and Features for related parts and what models
this part fits on.
$319.99
Miller Wheel Lift Hose Shield Vulcan 810
This is a hydraulic hose shield on the wheel lift for a Vulcan 810 by Miller
Industries. See Brochures for reference Chart and Features for related parts.
$228.99
Miller Boom End Century EB4 and 614
This is a Boom End Assembly for Century Wreckers by Miller Industries. This
boom end will fit the EB4 Express, EB4 6500, Formula 6500 - 600 Series, 614
with a Formula IIT. See Brochures for part schematics and Features to see what
models this boom end fits.
$1,054.99
Miller Inner Stinger Weldment Vulcan 880 / 890 and Modular 880 / 890
Note: Special Handling Fees Apply
This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.
Fits: Vulcan 880 / 890 (03/2008 - Current)
Vulcan Modular 880 / 890 (06/1999 - Current)
This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.
Fits:
$1,692.99
Miller Tensioner Mounting Angle, Century Midnight Express
This is a mounting angle for a cable tensioner on the Century Midnight Express
by Miller Industries. See Brochures for a part schematic.
$150.99
Miller Vulcan 810 and Holmes 440SL Hose Tension Shield
This is a hydraulic hose tension cover plate on the main boom of a Vulcan 810 and
Holmes 440SL by Miller Industries. See Brochures for a reference chart and
Features for related parts.
$171.99
Miller Tension Track, Century 300 Series, EB4 Express, Challenger 4300
This is the Hydraulic Hose Tension Track on a Century 300 Express Series, EB4
Express, and Challenger 4300 Express by Miller Industries. See Brochures for
part schematics and Features for related parts and to see what models this will
fit.
$377.99
Miller Hose Pulley Bracket Century 300 Series EB4 Express Challenger 4300
This is the hydraulic hose tension track bracket on the Century 300 Express,
EB4 Express, and Challenger 4300 Express Series by Miller Industries. See
Brochures for part schematics and Features for related parts and to see what
models this fits.
$424.99
Miller Boom End Swivel Weldment Century HD Wreckers
This Boom End Swivel Weldment from Miller Industries is used on the Boom Swivel Assembly of Century and Challenger Heavy Duty Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Numbers: 12-0800509 and 12-0800510.
$1,057.99
Miller Outer Stinger Weldment, Vulcan 810
This is the outer stinger weldment for the Vulcan 810. See features for
related parts and brochures for reference chart.
$2,656.99
Roll Pin, 3/16" x 2"
These are the roll pins for the sheave boom yoke shaft on the Midnight Express
by Miller Industries. Click on the brochure tab for a reference chart.
$0.45
1 - 53 of 53 items
