Search Results

This is a pivot pin, stanchion. It measures 1.48 x 22 in.

Pivot Pin Kit, Century Formula 6500 and Holmes DFT-650 wheel lifts mfg. after June of 2001. Includes (1) Pivot Pin, (1) Pivot Pin Bushing, (2) Thrust Washers, (2) Pivot Pin Retaining Bolts, (1) Grease Zerk.

This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held in place with an allen head bolt and washer on the top.

This is a Pivot Pin Kit for Vulcan 804, 831, 860, 870, 880, wrecker wheel lifts and all Vulcan car carrier wheel lifts 2005 or newer (3.5" crossbar). Also fits Century/Champion 10 series car carrier wheel lifts built in 2005 or later with Vulcan style crossbar. This kit includes one

This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts ('01 and older). This kit includes one

This Bed Pivot Pin from Miller Industries is for the bed of car carriers. It is used in the Subframe assembly of Century and Vulcan LCG 12, 16, and Generation II 16 Series Car Carriers. Please see the brochure tab for a list of breakdowns.

Pivot Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lift. Latest design built after August 2000. Includes (1) 12-0801073 Pivot Pin, (1) 12-0306879 Pivot Pin Bushing, (2) 12-0303402 Thrust Washers, and (2) 12-0701956 Pivot Pin Retaining Bolts.

Pivot Pin Kit, Century Formula 6500 and Holmes DFT-650 wheel lifts. Includes (1) 12-0802903 Pivot Pin, (1) 12-0306748 Pivot Pin Bushing, (2) 12-0710092 Thrust Washers, (2) 80013 Pivot Pin Retaining Bolts, (1) 83230 Grease Zerk.

Pivot Pin Kit for new style Century 300 series Express wheel lift with recessed pivot pin top plate.

Pivot Pin Kit for new style Century 300 series Express wheel lift with recessed pivot pin and 4-hole top plate.

This Pivot Pin Weldment from Miller Industries is used in the wheel lift assembly of Century and Vulcan Wreckers. It is also used in the boom assembly of some Century and Challenger Wreckers. Please see the brochure tab for a list of breakdowns.

This Pivot Pin Kit so for a Century Express 300 Series Wheel Lift. The kit includes one 12-0803916 Pivot Pin, one 12-0306748 Pivot Pin Bushing, two 12-0710092 Thrust Washers, two 12-0400637 Pivot Pin Retaining Bolts, two 12-0400428 Lock Nuts and one 80013 Grease Zerk.

Pivot Pin Kit for Holmes DFT-100 wheel lift. Kit includes (1) GX-46 Pivot Pin, (1) GR-232 Pivot Pin Bushing, and (1) GX-118 Pivot Pin Retainer Plate.

Pivot Pin Kit for Holmes DFT-100 wheel lift. Kit includes (1) GR-63 Pivot Pin, (1) GR-232 Pivot Pin Bushing, (1) GR-50 Pivot Pin Retainer Plate, and (2) DE-524 Button Head Screws.

This Lift Bar Pivot Pin from Miller Industries has a diameter of 3.5" and a length of 6".

This is a pivot pin kit for a Century Formula 6000, 600 Series Wrecker and Century 20 Series (2006 or older) car carrier wheel lift. This kit includes one

This Pivot Pin from Miller Industries fits a V60 heavy duty Wheel Lift. The pivot pin is 3.5" in diameter and 6.31" long.

This is a Pivot Pin Kit for a Century Midnight Express 300 Series by Miller Industries. This kit will provide you with everything you need to replace your old worn out pivot pin on your wrecker's wheel lift.

Pivot Pin Kit, Challenger I-600 wheel lift. Includes (1) 12-0802352 Pivot Pin, (1) 12-0302248 Pivot Pin Bushing, (2) Thrust Washers, and (1) 12-0400278 Pivot Pin Retaining Bolt.

Pivot Pin Kit with replacement top and bottom crossbar plates for Holmes DFT-200 wheel lift. Kit includes (1) GR-63 Pivot Pin, (1) GR-232 Bushing, (1) GR-50 Pivot Pin Retainer Plate, (2) DE-524 Button Head Screws, (1) GR-58 Bottom Crossbar Plate, and (1) GR-59 Top Crossbar Plate.

This is a Miller pivot pin keeper plate. It is for a gen 3.

Pivot Pin Kit for Century 3224 and 4024 underlifts with the 4" x 4" crossbar.

This Boom Stinger Pivot Pin from Miller Industries is used in the recovery boom and wheel lift boom assembly of Eagle EB-2 Modular Wreckers. The Pivot Pin measures 9-1/2" long, and has a diameter of 1". Please see the brochure tab for a breakdown.

Stinger Pivot Pin from Miller.

This is a replacement Chevron Crossbar Pivot Pin.

This is the pivot pin for used on the wheel lift of 2005+ Vulcan Modular 880. This is a 3-1/4" long by 1-1/4" in diameter.

This Pivot Pin Bushing from Miller Industries is used in the wheel lift assembly of Century 20 Series Car Carriers and Challenger 4800 Series Wreckers. The bushing is used with a pivot pin and goes on the inner boom weldment during assembly.

Cylinder Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts. This kit includes all of the pins that hold the tilt cylinders, the lift cylinders, and the upper arms, the hardware to hold the hold pins, new bushings for the tilt cylinders pins, new bushings for the upper arm pins, and grease fittings.

This Bottom Half Pivot Pin from Miller Industries is used on the Wheel Lift, and Underlift Assembly of Century, Challenger and Holmes Wreckers. It is 3.5" wide and 3" tall. Please see the features below for a list of wreckers and see the brochure tab for breakdown schematics.

Unable to sell outside of the United States of America

This Top Half Pivot Pin from Miller Industries is used on the Wheel Lift, and Underlift Assembly of Century, Challenger and Holmes Wreckers. It is 3.5" wide and 3" tall. Please see the features below for a list of wreckers and see the brochure tab for breakdown schematics.

Pivot Pin Kit for Century 5030, 5130, 5230, 7035, 9055 and SDU underlifts with the 5" x 5" crossbar.

This is a replacement front boom pivot pin.

This is a Miller pivot pin weldment-eb4 express.

This is a pivot pin kit from miller for FI 88s, DFT 400s and 94