Control Valve Bodies & Hardware

This is an older style Miller Industries Control Handle Knob. It is black in color, no markings, and is used for multiple functions on a light duty wrecker. See Features for related wreckers and Brochures for reference charts. This part can be used to replace Part Number 9032106.

This is a decal kit for the wheel lift operations on a Vulcan 880/890 Series by Miller Industries. This part can be used to replace Part Numbers: 9033149, 9033150, 9033151, 9033152, 9033153, 9033154, 9033155, and 9033156.

This is a Lock Pin Weldment with chain that is used on Vulcan Wreckers. It is used on the crossbar assembly with the wheel retainers. It locks the wheel retainer into the crosstube. This part can be used to replace Part Number, 9046566.

This 4 Spool Hydraulic Control Valve from Miller Industries fits on Miller 10 Series Car Carriers (Prior to 2001) and Miller 30 Seri es Car Carriers (2005-Current). It is also used on most twin line Century/Vulcan Wreckers. See the attached brochures for related pa rts data. This part can be used to replace Part Number 12-0303093.

This is a Miller Industries Control Handle Knob. It is red in color and is labeled Cable "In/Out" for winch operations. This knob is used on many light duty wreckers as well as car carriers. See Features below to view specific models or click on the Brochure tab to view the part schematics.

This is a Miller Industries Control Handle Knob. It is black in color and it is labeled Boom "Up/Down" for the wrecker boom operation. This control knob will work on most light duty wreckers by Miller Industries. To see which specific models this knob will fit please see Features below. To view the part schematics click on the Brochure tab.

This is a Miller Industries Control Handle Knob. It is black in color and is labeled "In/Out" for boom operations. See Features for related wreckers and Brochures for reference charts.

This is a rubber boot for a control lever on any Century or Vulcan modular wrecker by Miller Industries.

This part can be used to replace Part Number HC0198.

This is a newer style Miller Industries Control Handle Knob (old Style # 12-0301429). It is grey in color and is labeled "In/Out" for wheel lift extend operations. See Features for related wreckers and Brochures for reference charts.

This is a Miller Industries Control Handle Knob. It is grey in color and is labeled "Up/Down" for wheel lift tilt operations. See Features for related wreckers and Brochures for reference charts.

Control Rod Lever for Miller Wrecker Models. Fits all Century 200 Series, Holmes 550-2, 440-1 and 440-2, Century 411, 412, 611, 612, 601, 602, 712, 716, 211,311,312, Challenger 4700 and 4800 series wreckers with one piece bodies Takes knob kit 12-0901425 for dual winch wreckers and 12-0901426 for single winch wrecker.

This Control Knob from Miller Industries is the older style knob. The newer style knob can be found with part number

This is a Jerr-Dan rod, controls .75 DIA x 9.00.

This is a newer style Miller Industries Control Handle Knob (older Style # 12-0301428). It is grey in color and is labeled "Up/Down" for wheel lift extend operations. See Features for related wreckers and Brochures for reference charts.

This is an angle iron used to bear all the control rods and to keep them in line on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This 3 Spool Control Valve from Miller Industries is used on Century, Challenger and Vulcan Wheel Lifts. It fits Vulcan 880/890, Century 411/412, 602/612, and Challenger 4700/4800 Wreckers.

This is a C-channel end iron used to bear all the control rods and to keep them in line on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This 4-Spool Control Valve from Miller Industries is used on Twin Line Wreckers. It is used on Century, Challenger and Vulcan Wheel Lifts made in 2008 or newer. See the features below for a list of wreckers.

This is a control rod bushing SSB-625 for the wheel lift on the Vulcan 880 and 890 Series wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is a control lever on light duty wreckers by Miller Industries. It is a universal control rod for light duty wreckers and is bare metal (no coating). See Features for related wreckers and Brochures for reference charts.

This is a Miller Industries Control Handle Knob. It is grey in color and is labeled "Open/Close" for the wheel lift autoload claw operations. See Features for related wreckers and Brochures for reference charts.

This Fold Up/Down Control Knob from Miller Industries is Red in color with White lettering on the top. It is used on the Control Assembly of several Miller Wreckers. These include Century, Challenger and Vulcan Wreckers. See the features below for a full list of wreckers and see the brochure tab for breakdowns.

This is a bushing for a control handle on Vulcan and Century light duty wreckers by Miller Industries. It is flanged and is dimensioned at 3/4" x 7/8" x 3/4". See Features for related wreckers and Brochures for reference charts.

This is a cross control arm on light duty wreckers by Miller Industries. It is a universal cross control arm for light duty wreckers and is bare metal (no coating). See Features for related wreckers and Brochures for reference charts.

This is a long extension rod for a control rod on light duty wreckers by Miller Industries. It is 5 1/2" in length and can be used for different applications on a light duty wrecker. See Features for related wreckers and Brochures for reference charts.

This is a control rod for the wheel lift on the Vulcan 880 and 890 Series by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is a Century Express valve 6 spool Wavoil 311 from Miller Industries.

This is a short shifter valve on light duty wreckers by Miller Industries. It is 4 1/2" in length and can be used for different applications on a light duty wreckers. See Features for related wreckers and Brochures for reference charts. This part can be used to replace Part Number 12-0800612.

This is a replacement control knob kit for the Century 400 / 600 Series light duty wreckers by Miller Industries. This knob kit is for a single winch setup on your wrecker. To view the part schematic please click on the Brochure tab above.

This is a short extension rod for a control rod on light duty wreckers by Miller Industries. It is 3 1/2" in length and can be used for different applications on a light duty wrecker. See Features for related wreckers and Brochures for reference charts.

This is an outer control rod for the wheel lift on the Vulcan 880 and 890 Series wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is a control handle pivot rod on the Vulcan 807 and 880/890 Series by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This Control Station Guard from Miller Industries is used on the body assembly of Century, Challenger, Champion, Eagle and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a long shifter valve on light duty wreckers by Miller Industries. It is 11 1/2" in length and can be used for different applications on a light duty wrecker. See Features for related wreckers and Brochures for reference charts. This part can be used to replace Part Number 12-0800613.

This is a crossrod on light duty wreckers by Miller Industries. It can be located as the back two crossrods within the control rod assembly. See Features for related wreckers and Brochures for reference charts.

This is a wheel lift crossrod on light duty wreckers by Miller Industries. It can be located at the 3rd or 5th rod within the control rod assembly. See Features for related wreckers and Brochures for reference charts.

This is a crossrod on light duty wreckers by Miller Industries. It can be located as the center rod within the control rod assembly. See Features for related wreckers and Brochures for reference charts.

This is the hydraulic hose tube weldment on the Century 311/312 by Miller Industries. See Brochures for a reference chart.

This is a 5-control handle mounting plate on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is a control handle pivot rod on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is a 6-control handle mounting plate on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is a control rod for the boom lift function on light duty wreckers by Miller Industries. It is 65" in length. See Features for related wreckers and Brochures for reference charts.

This is a control rod for the stinger extend function on light duty wreckers by Miller Industries. It is 73" in length. See Features for related wreckers and Brochures for reference charts.

This is a control rod for the stinger tilt function on light duty wreckers by Miller Industries. It is 69" in length. See Features for related wreckers and Brochures for reference charts.

This is a tie rod for the winch on light duty wreckers by Miller Industries. It is used for the winch operation and is threaded 5/16-24 x 10.87". See Features for related wreckers and Brochures for reference charts.

This is a tie rod for the stinger extend on light duty wreckers by Miller Industries. It is used for the stinger extend operation and is threaded 5/16-24 x 16". See Features for related wreckers and Brochures for reference charts.

This is a tie rod for the boom lift on light duty wreckers by Miller Industries. It is used for the boom lift operation and is threaded 5/16-24 x 12.5". See Features for related wreckers and Brochures for reference charts.

This is a tie rod for the stinger tilt on light duty wreckers by Miller Industries. It is used for the stinger tilt operation and is threaded 5/16-24 x 14". See Features for related wreckers and Brochures for reference charts.