Latches

This is a complete Latch assembly

This stainless steel Paddle Latch is for use with new style toolboxes that have a striker pin for a latch. The latch locks over the striker pin. This latch comes with a lock and is lockable by key, which is included.

This is a positive locking latch from Buyers Products. This latch is lockable by key and is made from stainless steel. It will fit most underbody toolboxes. Mounting holes, included gasket, and flush-mount design provide a snug installation. The cam adjusts from 1-1/4 in. to 2 in. to accommodate varying door thicknesses. The latch is shaped and sized to accommodate standard-size cut-outs.

This is a Jerr-Dan latch, it is an ergo t-handle. It is for the driver's side.

This Hansen Door Latch from Miller Industries is used on the Body Assembly Toolbox Doors of Century 1040B / SDU3 Wreckers. The latch replaces your new style push button latch. See the brochure tab for breakdowns.

Latch Handle Only

This stainless steel rotary style latch from Miller Industries is used on the new style toolboxes with a striker pin for a latch. It comes with a lock and key. This part can be used to replace part number 9048750. This latch uses striker part number 12-0803703 and gasket part number 12-0304425.

This Stainless Steel Paddle Latch from Buyers Products comes with keys included. This part can be used to replace Part Number MM-529.

Left Rotary Latch (Fits All Models) Serial # 500657 or newer,

RC Industries Anchor Latch Pawl Kit

This is a replacement T-Handle Latch from Buyers Products. This latch is powder coated and has a chrome handle.

This replacement Latch from Hanson is typically used on Century Heavy Duty Wreckers. It is made from aluminum and has a lock over striker pin. The latch is lockable with the provided key.

Buyers Products Standard Size Flush Mount Non-Locking Paddle Latch is a single point latch built to handle the demands of daily use. The non-locking, rectangular latch is designed to mount into a 3-3/8 in. by 4-5/8 in. recess and is available in rust-resistant steel (welded on) or stainless steel (bolted on).

Latch mechanism and hardware for D-paddle latches for storage doors on Vulcan Heavy Duty wrecker bodies.

Bolt on striker pin for new style striker type paddle latch

This is a replacement T-handle latch that will fit RC toolboxes. This latch is stainless steel which makes it resistant to rust.

Buyers Products Standard Size Rectangular Rotary Paddle Latch is a single-point rotary latch with installed gasket and is designed to handle the demands of daily use. Constructed from polished stainless steel, this rectangular latch has hidden studs to add an extra level of security. Simply close the latch and go, or use the included keys to lock it.

This is a standard size 2 point T-Handle latch with mounting holes by Buyer's Products. This latch features 2 point construction and includes rods that make this latch a great option for long doors. This is a flush mounted latch that offers a smooth, perfessional look. It is corrosion resistant with mounting holes to make installation quick and easy.

Phoenix T-Handle Latch with a Stainless Steel Finish. Latch is Flush Mounted with a Right Hand Mounting Application. This Latch is Supplied with 2 Keys.

This Stainless Steel Paddle Latch for Jerr-Dan toolboxes holds up well to the elements.

Buyers Products Tall Flush Mount T-Handle Latch with Blind Studs comes with a lock and key set installed, and gasket. The latch is constructed from stainless steel for durability and corrosion-resistance, and features a durable, folding T-handle. Blind studs, included gasket, and flush-mount design provide for a water-tight installation. The cam can adjusts from 1-1/4 in. to 2 in to accommodate varying door thicknesses. The latch is shaped and sized to accommodate tall T-handle cut-outs, and many Buyers Products rotary paddle latch cut outs.

Buyers Product Standard Size Flush Mount T-Handle Latch with Blind Studs comes with a lock and key set installed, and gasket. The latch is constructed from stainless steel for durability and corrosion-resistance. Blind studs, included gasket, and flush-mount design provide for a water-tight installation. The cam can adjust from 1-1/4 in. to 2 in to accommodate varying door thicknesses. The latch is shaped and sized to accommodate most common cut-outs.

This replacement Latch from Hanson is typically used on Century Heavy Duty Wreckers. It is made from aluminum and has a lock over striker pin. The latch is lockable with the provided key. ***New style lighted handle***

Phoenix toolbox latch with key 01 crome handle and blakc Hansen housing

Mount this Grab Pull Handle anywhere on your truck or trailer where an extra handhold is needed. Comes with four pre-drilled holes to accept 1/4"-dia. nuts and bolts (not included). 13"L x 1/2" dia. with a 7"L x 1-9/16"D grab s

Buyers Products Junior Flush Mount Rectangular Non-Locking Paddle Latch is a single point latch built to handle the demands of daily use. The non-locking, rectangular latch is designed to mount into a 2-3/4 in. by 3-3/4 in. recess and is available in rust-resistant steel (welded on) or stainless steel (bolted on).

Buyers Products Co. rods for a two or three point latch. Measures 34". Can purchase as each or as a pair.

Buyers Products Replacement Poly Underbody Flush Mount T-Handle Latch has four mounting studs to mount flush with the surface for a smooth and professional finish. The 3-point latch is constructed from polished stainless steel for maximum corrosion resistance. The roller cam adjusts from .25 in. to 1.6 in. to accommodate varying door thickness. The latch is designed to work on Buyers Products polymer underbody truck boxes and will not work with other truck boxes.

Keep the working parts of the D-latch door handle on your truck's storage box free from moisture with this replacement foam gasket from Miller Industries.

Standard Paddle Latches are 4-1/4"W x 5-1/2"H and mount in a 3-3/8"W x 4-5/8"H recess. Junior Paddle Latches are 3-5/8"W x 4-3/4"H and mount in a 2-3/4"W x 3-3/4"H recess. BL9000 T-Handle Latch is 5-3/4"W x 6"H. TH800 T-Handle Latch is 4-3/4"W x 4-7/8"H x 2-1/8"D. BL8816 T-Handle Latch is 4-3/4"W x 5-1/2"H and mounts in a 3-3/4"W x 4"H recess opening.

Return the T-latch on your truck's storage box back to its original watertight condition with this replacement rubber gasket from Austin Hardware and Supply. The rubber gasket seals out moisture for Austin Flush T-Latches.

American Eagle Locking T-Handle. This Single Handed T-Shaped Latch Works Great For Convenient One-Handed Access. All Of American Eagle's Drawers Are Keyed For Security.

Buyers Products Standard Size 3 Point T-Handle Latch with Mounting Holes comes with a lock and key set installed, and rods. The latch is constructed from stainless steel for durability and corrosion-resistance, and features a durable, folding T-handle. The cam can adjust from 1-1/4 in. to 2 in to accommodate varying door thicknesses. The added rods increase secure latching points.

Buyers Products Junior Flush Mount Rectangular Paddle Latch is a single-point latch built to handle the demands of daily use. The lockable, rectangular latch is designed to mount into a 2-3/4 in. by 3-3/4 in. recess and is available in rust-resistant steel (welded on) or stainless steel (bolted on).

Mount a Grab Pull Handle anywhere on your truck or trailer where an extra handhold is needed. Comes with four pre-drilled holes to accept 1/4"-dia. nuts and bolts (not included). 13"L x 1/2" dia. with a 7"L x 1-9/16"D grab sect

This Gasket from In The Ditch is a replacement part for the ITD-7106 Paddle Latch.

This is a striker for the rotary style Miller Industries Latch. This striker is used with latch part number 12-0303597.

This is a SnowDogg gasket, t-handle latch, for L8815 latch.

This is a standard size single-point rotary paddle latch that has a gasket installed and is designed to handle the demands of daily use. This latch is by Buyers Products and is constructed from polished stainless steel. This latch has hidden studs to add an extra level of security. Simply close the latch and go, or use the included keys to lock it.

This is a t-handle latch w/ gasket (PH3199PK10).

Black rubber material built for large paddle latch.

CTech drawer latch kit contains all of the items needed to replace a both the left and right MotionLatch drawer latches. Basic tools are required.

Phoenix T-Handle Latch with PK2 Lock and Cylinder.

Single Point Toolbox Latch with a Black Plate.

Ideal for small hoods, lids, doors, and panels. Single point actuator with 0.25" diameter hole. Maximum rated load strength is 750 lbs. 1/4-20 threaded sleeves/axles. Striker must be ordered separately. Built with stainless steel material.

ITD replacement drawer slide left or right hand.

Phoenix Lock and Key Cylinder for T-Handle Latch (PH3199) with PK3 Keys.

Left handed bottom lever rotaty latch built with steel with a zinc plated, bright chromate finish.

Buyers Products "T" Type Locking Door Handle is surface-mounted and rotates 360° to fit a variety of applications. Chrome-plated for corrosion resistance, the handle can be locked in four positions spaced at 90° apart. The most commone use for this products is Trailer Doors, Camper Shells, Pickup Shell Covers.

Phoenix Rubber Gasket for a T-Handle Latch.