Auto and Truck Accessories

The Trux front hubcaps are designed to fit oiled axles only, and includes 4, 5, and 6 notchs and clips. The hubcap includes easy installation; align the notches to front wheel tabs and push gently until it locks in place.

This kit is a complete chrome ABS plastic front and rear axle and nut cover kit. This kit includes and easy installation process with a reusable installation wrench. By removing 2 lug nuts opposite from each other you can install the axle covers, then reinstall the two lug nuts and add the chrome finish nut covers over the lug nuts.

The THUB-FRP33 is a chrome ABS plastic front axle cover kit with removable center cap and 33mm threaded nut covers. With its high quality ABS chrome plastic, it cleans effortlessly, is high impact, light weight and flexable.

These 66" Poly Half Fenders with rolled edges are designed to withstand the nastiest of conditions. The fenders are high quality polyethylene which has been tested & proven to resist chemical spills & UV rays.

The THUB-RP33 is a chrome ABS plastic rear axle cover kit with removable center cap and 33mm threaded nut covers. With its high quality ABS chrome plastic, it cleans effortlessly, is high impact, light weight and flexable.

The THUB-FRP33P is a chrome ABS plastic front pointed axle cover kit with removable center cap and 33mm threaded pointed nut covers. With its high quality ABS chrome plastic, it cleans effortlessly, is high impact, light weight and flexable.

The TRX-SPC8 is a 60" or 66" stainless steel half fender kit, including mounting hardware. It is designed to fit 43.5 or 46.5" O.D tires.

This kit includes and easy installation process with a reusable installation wrench. By removing 2 lug nuts opposite from each other you can install the axle covers, then reinstall the two lug nuts and add the chrome finish nut covers over the lug nuts.

These 24in Poly Half Fenders with rolled edges are designed to withstand the nastiest of conditions. The fenders are high quality polyethylene which has been tested & proven to resist chemical spills & UV rays.

Trux Accessories stainless steel half fender mounting kit with triangular undermounts. The following items are included in this kit: (2) triangular mounting brackets, (2) triangular fender arms(14 ga), (2) threaded post mount tubes, (2) clamps.

The TSUN-PETERBILT series sun visors are designed to fit Peterbilt models (1987+) with 2-piece glass windshields and cab-mounted mirrors. You are able to choose between a variety of different LED colors and an option of louvered spaces. It has an IP67 waterproof rating and is made from stainless steel protecting it from corrosion. It also includes a one-year warranty on the stainless steel and a three-year warranty on the LED

The TU-9210LC is a flat top mud flap hanger pair with 2 1/2" bolt spacing & 4" clear LEDs. These mud flap hangers come pre-wired and assembled for quick and easy installtion including locking nuts, LED lighting, grommets and light bezels.

The TU-9210L2 is a flat top mud flap hanger pair with 2 1/2" bolt spacing & 4" dual LEDs. These mud flap hangers come pre-wired & assembled for quick and easy installation including locking nuts, LED lighting, grommets and light bezels.

Built with stainless steel and sold as a pair.

The TSUN-KENWORTH is built to fit Kenworth Models (1987+) as a 13" post mount louvered "glow trim" sun visor. The visor can be purchased for either curved glass windshields or flat glass windshields and has two louvered space fittings for the 12" LED glow strips. There are options for multiple different LED colors. Finally, it is made of stainless steel and has an IP67 rating, making it extremely resistant to corrosion.

These 24" Economy Fleet Quarter Fenders are tough stainless steel construction featuring a welded and polished end cap to keep moisture and grime out. This pair of fenders is not only good looking, but it is also affordable and functional made from 18-gauge stainless steel.

The TU-9210L1 is a flat top mud flap hanger pair with 2 1/2" bolt spacing & 4" LEDs. These mud flap hagers are pre-wired and assembled for quick and easy installation and includes locking nuts, LED lighting, grommets & light bezels.

Sunvisor sold individually, designed to fit models with a raised roof. Built with stainless steel material and includes hardware and Trux bracket.

The TNUT-MF2T are designed to fit minimum 1/2" of exposed thread for thread nut covers. Made of chrome ABS plastic and is sold individually.

The chrome ABS plastic axle cover kits are offered as your choice of a complete kit (THUB-MC1), front axle kit (THUB-MFRP33), or a rear axle cover kit (THUB-MRP33). The complete kit offers 2 x chrome ABS plastic Mag Wheel front axle covers, 4 x chrome ABS plastic Mag Wheel rear axle covers, 30 x chrome ABS plastic 33mm threaded nut covers, 6 x plastic rim protectors, and a nut cover tool. THUB-MFRP33 offers a front Mag Wheel axle cover with a removable center cap, 5 x 33mm threaded nut covers, and a plastic rim protector. THUB-MRP33 offers a rear Mag Wheel axle cover with a removable hubcap, 5 x 33mm threaded nut covers and a plastic rim protector.