0 Item(s)
You have no items in your shopping cart.
Lighting
Showing 149 items
Clear all filters
Recently viewed products
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Truck-Lite Grommet Kit 2 1/2" Marker Light
This replacement Grommet Kit will house a 2-1/2" Round Marker Light. The kit
includes a grommet and plug-in.
$3.69
Truck-Lite Round 10 Series High Profile 8 Diode Marker Clearance Light
Most advanced and cost effective 2-1/2'' clearance and marker lamp. SAE
PC-rated for combination clearance/marker applications. Flange gasket available
for additional protection. Electronics completely sealed in epoxy to resist
corrosion and moisture.
$24.69
–
$31.59
Truck-Lite 33 Series 3/4" LED Lights w/ Clear Lens
These 33 Series 3/4" Sealed LED Lights from Truck-Lite are the worlds smallest
LED marker for the transportation industry. Choose from a Red or Yellow light,
both colors come with a clear lens and they are completely sealed in epoxy to
resist corrosion and moisture. These lights draw less current, which allows for
more power on your other vehicle requirements.
$22.09
–
$22.19
Truck-Lite LED Marker Light 1 1/2" x 4 1/2" Rectangle
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
$32.09
–
$32.29
Truck-Lite Round 10 Series Low Profile 8 Diode Marker Clearance Light Kit w/ Mounting Option
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehilce requirements. Most advanced and cost
effective 2-1/2" clearance and marker lamp. SAE PC-rated for combination
clearance/marker applications.
$19.89
–
$30.29
Truck-Lite High Profile 8 Diode Marker Clearance PL-10 Light
30 Series high profile LED marker clearance light is designed with 8 diodes and
built as a red round light. Most advanced and cost effective 2" clearance and
marker lamp. LEDs have no filament, therefore are not susceptible to shock and
vibration. Less current draw, resulting in increased battery and alternator
life while allowing more power for other vehicle requirements. SAE PC-rated for
combination clearance/marker application.
$27.19
–
$32.79
Truck-Lite Stop/Turn/Tail 24 Diode Oval Light
Truck-Lite SS605 is a 6 oval, red LED Stop/Tail/Turn light with two lens color
options. This 24-diode LED exceeds FMVSS-P2 DOT requirements for marker and
clearance performance. Featuring a unique display array, this extremely bright
light provides more visibility, and its quality construction ensures
performance and longevity for lower overall operating costs. Available in clear
or red, the polycarbonate lens snaps in place with housing locks, and the
electronics are encapsulated with epoxy for a weathertight seal.
$26.49
–
$28.79
Truck-Lite Grommet Cover for 10 Series & 2.5" Lights
Designed to enhance appearance of lamps. Flange cover offers improved theft resistance.
$5.39
Truck-Lite 2 Diode Marker Clearance Ring Terminal/Stripped End Light
Full pattern light output. Popular on show truck applications. Designed for
areas with limited space. Not suitable for PC requirements. Hardwired design
eliminates pin corrosion.
$9.29
–
$9.59
Truck-Lite 3 Diode Dual-Function Flexi-Lite Adhesive Mount
Lamps operate in minor and major output levels; major function activated by the
brake function or turn signal. Yellow Major function is 3 times brighter than
minor function. Red Major function is 7 times brighter than minor function.
Provides marker/clearance solution that requires no mounting brackets or
installation screws. Lamps adhere directly to application surface through use
of heavy-duty adhesive backing. Electronics are completely sealed in epoxy to
resist damage caused by moisture and corrosion. Rear exit wire version requires
a 3/8" mounting hole, and self-seals hole upon installation. Care should be
taken for proper installation.
$29.09
–
$29.89
Truck-Lite Round Incandescent Marker Clearance Light
Wabash and Monon replacement. Lamp designed for PC requirements on a 45-degree
angle in mounting devices #30720, #00801, #00803, #00804 or surgace mount
flange. Replaces Signal-Stat 1030 series.
$3.69
Truck-Lite Round 10 Series High Profile 8 Diode Marker Clearance Light
Most advanced and cost effective 2-1/2" clearance and marker lamp. SAE PC-rated
for combination clearance/marker applications. Flange gasket available for
additional protection. Electronics completely sealed in epoxy to resist
corrosion and moisture.
$25.19
–
$32.79
Truck-Lite 2.5" Open Back Wide Groove Grommet
Flush mounts 2-1/2" diameter lamps. Suitable for PC requirements on a 45-degree
angle when using LED or incandescent PC-rated/combination lamps. Closed-back
versions recommended for open installation where splash plate is not used.
$2.29
Truck-Lite Round P2 10 Series 2 Diode Marker Clearance Light w/ Flange Mount
This standard lamp has 2 diodes. Less current draw, resulting in increased
battery and alternator life while allowing more power for other vehicle
requirements. Electronics completely sealed in epoxy to resist corrosion and
moisture.
$12.79
–
$13.39
Truck-Lite Round 33 Series 1 Diode Marker Clearance Light
World's smallest LED marker lamp for the transportation industry. The light
exceeds legal requirements and is designed as a hardwired lamp easily
retrofitted. LEDs draw less current, allowing more power for other vehicle
requirements. Electronics completely sealed in epoxy to resist corrosion and
moisture. Offers trailer engineers and manufacturers new trailer and rear door
structure design flexibility. Requires 3/4" mounting hole, material thickness
for flange is 040"- 250", material thickness for crommet is 125" - 250".
$16.89
–
$21.29
Truck-Lite 5 Diode Fit 'N Forget Marker Clearance Light
Slim 3/4" wide design making the lamp a perfect solution for narrow rail
designs. Must be mounted horizontally. SAE PC-rated for combination
clearance/marker applications.
$19.79
–
$20.39
Truck-Lite Round License Plate Lamp
This round, push in style light can be used as a license plate light or a control panel light. It is commonly used on the Mounting and Tilt Frame Assembly of several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a list of assemblies and see the brochure tab for breakdowns. This part can be used to replace Part Number 12-0300867.
$4.82
Truck-Lite Rectangular 6 Diode Work Light
Rugged all purpsoe work lamp with general purpose "work" pattern. LED light is
whiter and brighter than comparable incandescent lamps. LEDs have no filment,
therefore are extremely resistant to shock and vibration and also have less
current draw, resulting in increased battery an alternator life while allowing
more power for other vehicle requirements. Includes stainless steel mounting
hardware. Mounts on one 5/16"-18 stud.
$69.99
Truck-Lite 3-position Sure Seal 15 Diode Multivolt Stop/Tail/Turn Light
Available with flange or grommet mount. Complies with FMVSS 108 mounted
vertically or horizontally. Complies with FMVSS requirement for minimum of 75
cm2 of luminous lens area. Integral plug design. Specifically designed for use
in trailer and body applications. Epoxy-sealed electronics resist corrosion,
moisture, shock and vibration. Limited lifetime warranty
$59.99
–
$64.99
Truck-Lite Rectangular 15 Series Marker Clearance Light
Fits in most narrow header rails and mount vertically or horizontally.
Long-life 15,000-hour bulb. Snap-lock tabs allow quick and easy installation.
Suitable for PC requirements on a 45-degree angle.
$3.89
–
$4.19
Truck-Lite 10 Diode Oval Work Light
Rugged all purpsoe work lamp with general purpose "work" pattern. LED light is
whiter and brighter than comparable incandescent lamps. LEDs have no filment,
therefore are extremely resistant to shock and vibration and also have less
current draw, resulting in increased battery an alternator life while allowing
more power for other vehicle requirements. Includes stainless steel mounting
hardware. Mounts on one 5/16"-18 stud.
$108.99
Truck-Lite Marker Clearance PL-10 Right Angle Stripped End/Ring Terminal Plug
Right angle design for use in limited space areas. 6.5" 16 gauge GPT wire with
tin plated brass terminals. Built as a marker clearance PL-10 right angle plug
with a stripped end and ring terminal connection.
$2.79
Truck-Lite Marker Clearance Fit 'N Forget M/C .180 Bullet Plug
Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps
for Lifetime Lighting Warranty eligibility. 5" 16 gauge GPT wire with tin
plated brass bullets/receptacles. Built as a Fit 'N Forget M/C .180 bullet
terminal plug.
$3.79
Truck-Lite Oval Side Turn Signal Incandescent Light
Truck-Lite 60215Y is a multi-function 6-1/2 oval amber, single-bulb 60 Series
incandescent Turn light offering side indicator, marker/clearance and reflector
functions. The grommet-mounted light meets the Meets SAE J2039 recommendation,
and the raised profile offers 3D visibility from several angles. The light s
electronics are completely sealed in epoxy to resist corrosion and moisture,
and the impact-resistant polycarbonate lens is sealed for further protection
from the elements. A standard PL-3 plug secures the wiring connection.
$15.29
Truck-Lite 4" Open Back Grommet
Flush mount 4" diameter lamps in a 4 1/2" hole. Designed to provide additional
shock absorbence to ectend lamp life. TPR grommet designed for extreme
environmnetal appliations and eliminated outgassing.
$2.29
Truck-Lite 10 Diode Beehive Marker Clearance Light
Popular replacement for cab marker or corner trailer applications. Standard
PL-10 connection.
$8.79
–
$21.09
Truck-Lite Rectangular 8 Diode 21 Series Fit 'N Forget Marker Clearance Light
Innovative optic design allows one PC-rated lamp the ability to function as
two. Draws less current, allowing more power for other vehicle requirements.
Uses standard mounting holes and accessories. PC-rated lamps have 8 diode
pattern.
$27.79
–
$32.79
Truck-Lite Square 24 Diode Red/Amber LED Pedestal Light
Ideal for show trucks, highway, mowing, municipal and farm equipment. Unique
LED array displays full pattern output. Side marker reflex reflcetor. LEDs have
no filament, therefore are extremely resistant to shock and vibration. LEDs
have less current draw, resulting in increased battery and alternator life
while allowing more power for other vehicle requirements. Epoxy-encapsulated
electronics protect the lamp from damage caused by chemicals and moisture.
$66.99
–
$68.99
Truck-Lite Round Super 44 Turn Signal 42 Diode Light w/ Mounting Option
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicle requirements. Faster illumination offers
significant safety benefit for following drivers to react quicker, resulting in
an average of 3' reaction time advantage for every 10 mph. LEDs have no
filament, therefore are not susceptible to shock and vibration.
$73.99
–
$76.99
Truck-Lite Round 13 Diode Marker Clearance Light
Unique combination of colored LEDs with clear lens draws attention to the lamp
only when lit. Electronics completely sealed in epoxy to resist corrosion and
moisture. Lower power draw, allowing more power for other vehicle requirements.
$9.79
–
$12.19
Truck-Lite Stop/Turn/Tail PL-3 Fit 'N Forget Plug
Keeps water, salt and other corrosives from LED lamps. 8.5" 16 gauge GPT wire
with tin plated brass terminals. Built with PL-3 Fit 'N Forget connections.
$18.19
Truck-Lite 6 Diode Multivolt LED Work Light
This light is a rugged all purpose work lamp with general purpose "work"
pattern. LED light is whiter and brighter than comparabe incandescent lamps.
LEDs have no filament, therefore are extremely resistant to shock and vibration
LEDs have less current draw, resulting in increased battery and alternator life
while allowing more power for other vehicle requirements. Includes stainless
steel mounting hardware, mounting on one 5/16"-18 stud.
$82.99
2.5" LED Light, Amber, Non-Reflective
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
$8.29
Truck-Lite Fit 'N Forget Marker Clearance Light
Slim 3/4" wide design making the lamp a perfect solution for narrow rail
designs. Must be mounted horizontally. Not suitable for PC requirements.
$11.09
–
$11.49
Truck-Lite Round 42 Diode Supper 44 Series Metalized Reflector Strobe Light
Metalized reflector version offers more intense focused light. The light offers
dual or quad flash pattern and meets recommended SAE J1318 and J845 photometric
specifications. Synchronized alternating feature. Lamp life rated at 100,000
hours and is resistant to shock and vibration. Fit 'N Forget adapter plug
provides corrosion and moisture resistance. Integral flange option features
built-in lens.
$62.99
–
$75.99
Truck-Lite Round 66 Series 6" Oval Reverse Light w/ Mount Option
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicle requirements. Single-diode technology
with Fit N' Forget connection for increased corrosion resistance. Two lamps
required for back-up and must be mounted vertically. Meets specifications for
dome lamp applications.
$67.99
–
$71.99
Truck-Lite Midwest Wheel LED Marker 4 Diode Lights
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents. Available in Amber and Red.
$15.23
Truck-Lite Stop/Turn/Tail PL-3 Stripped End/Ring Terminal Plug
For use with double contact sealed incandescent lamps. Built as an 11" 16 gauge
GPT wire with tin plated brass terminals. PL-3 stripped end and ring terminal
plug.
$2.49
Truck-Lite Round Super 10 Incandescent Light w/ Reflector Lens
Unique shock-mount extends bulb life with 15,000-hour rated bulb life. Sealed
polycarbonate lens and housing. Meets PC requirements on a 45-degree angle
using all mounting devices.
$7.29
Truck-Lite Stainless Steel Oval Flange Cover
Grommet cover features chrome plated plastics to enhance appearance of lamps.
Flange cover provides improved theft resistance of LED lamps. Two screws
required.
$9.09
Truck-Lite Low Profile 6 Diode Marker Clearance Light w/ Mounting Option
Highest quality LED lighting products on the market. Most advanced and cost
effective 2" clearance and marker lamp. LEDs have no filament, therefore are
not susceptible to shock and vibration. Less current draw, resulting in
increased battery and alternator life while allowing more power for other
vehicle requirements. SAE PC-rated for combination clearance/marker
applications.
$22.89
–
$25.39
Truck-Lite Round Low Profile Fit N' Forget Light w/ Flange Mount
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicle requirements. Most advanced and cost
effective 2-1/2" clearance and marker lamp. SAE PC-rated for combination
clearance/marker applications.
$25.69
–
$26.09
Truck-Lite 2" Open Back Grommet
Flush mounts 2" diameter Truck-Lite lamps.Suitable for PC requirements when
using LED or incandescent PC-rated/combination lamps. Closed-back versions
recommended for open installation where splash plate is not used.
$2.29
Truck-Lite Marker Clearance .180 Bullet/Ring Terminal Fit 'N Forget Plug
Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire;
tin plated brass terminals. The connector is a .180 bullet and ring terminal
Fit 'N Forget S.S. plug.
$2.79
Truck-Lite Rectangular Fit 'N Forget Marker Clearance Light
Innovative optic design allows combination lamp to function as two. Draws less
current, allowing more power for other vehicle requirements. Designed to fit
applications requiring minimal space. Must be mounted horizontally. PC-rated
lamps meets requirements when mounted on a 45-degree angle. Standard red lamps
have 2 diode pattern. PC-rated red lamps and standard yellow lamps have 4 diode
pattern.
$19.69
–
$27.49
Truck-Lite Round Stop/Turn/Tail 10 Diode Light
Truck-Lite 334058 is a 4-1/4 round, red Signal Stat Stop/Tail/Turn light. This
10-diode LED exceeds FMVSS-P2 DOT requirements for marker and clearance
performance. The sealed lens is made from impact-resistant acrylic material,
and the epoxy encapsulation keeps moisture out of the electronics and extends
the life of the light. The snap-fit grommet stops vibrations and LEDs mean no
filaments to break, making this light extremely durable. This 12V replacement
light offers a two-year warranty.
$19.59
Truck-Lite Round Stop/Tail/Turn LED Light w/ Mounting Option
Truck-Lite 4432R is a 4 round, red Super 44 LED Stop/Tail/Turn light. The
six-diode light has no filament to break and is therefore extremely resistant
to shock and vibration. This 12V light has a low amp draw and uses a
Fit-N-Forget connection for a tighter seal. Choose from grommet mount or flange
mount. This light includes a lifetime warranty.
$24.29
–
$26.29
Truck-Lite Round 24 Diode Single Face Pedestal LED Light
These LED lights are built as single faced pedestal lights with one stud mount
and a hardwired plug with 3 wires. Option of amber or red light with 24 diodes.
Ideal for show trucks, highway mowing, municipal and farm equipment.
$35.19
Truck-Lite Oval Stop/Tail/Turn Light w/ Mounting Option
Truck-Lite 6025R is a 6-1/2 oval red Signal Stat LED Stop/Tail/Turn light with
a red lens. The super bright light emits 26 diodes and exceeds FMVSS 108 DOT
requirements for marker and clearance performance. Epoxy-encapsulated
electronics prevent damage from moisture and corrosion, and the
impact-resistant polycarbonate lens is sealed for further protection from the
elements. A standard PL-3 plug secures the wiring connection. Choose from
grommet or flange mount.
$42.29
–
$44.79
Truck-Lite Marker Clearacne Fit 'N Forget M/C .180 Bullet/Ring Plug
Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps
for Lifetime Lighting Warranty eligibility. 5" 16 gauge GPT wire with tin
plated brass bullets/receptacles. Built as a Fit 'N Forget M/C .180 bullet
terminal and ring terminal plug.
$3.09
Truck-Lite Incandescent License Light
Extra-rugged, cadmium-plated steel housing|Screw lock cover cams on/off for
easy bulb replacement. Ideal for license, instrument or step lighting. Surface
mounts, grounds through screw. Replaces Signal-Stat 431W. 1/4" screw hole
diameter.
$5.69
Truck-Lite Round 40 Series 4" Reverse Bulb Light w/ Mount Option
Uniquely designed shock mount extends lamp life. Sealed polycarbonate lens and
housing resist heat and impact. Flange and flush mount grommets designed for
mounting in a 4-1/2" hole. Not recommended for dome lamp use. Upgrade to LED
lighting systems using Truck-Lite Super 44 Series products.
$12.39
–
$12.99
Truck-Lite Oval Side Turn Signal Light w/ Mounting Option
Truck-Lite 6025R is a 6-1/2 oval amber 60 Series LED Turn light typically
installed at the mid-point on trailers or the no-zone on tractor-trailer
combinations. The raised profile offers 3D visibility from several angles. The
super bright light emits 26 diodes and exceeds FMVSS 108 DOT requirements for
marker and clearance performance. Epoxy-encapsulated electronics prevent damage
from moisture and corrosion, and the impact-resistant polycarbonate lens is
sealed for further protection from the elements. A standard PL-3 plug secures
the wiring connection. Choose from grommet or integral flange mount.
$65.99
–
$68.99
Truck-Lite Round Super 44 Stop/Tail/Turn 42 Diode Straight PL-3 Female Kit
This Super 44 model is a red round stop/turn/tail LED light with Fit 'N Forget
S.S. light. Faster illumination offers significant safety benefit for following
drivers to react quicker, resulting in an average distance of 3' for every 10
mph. LEDs have no filament, therefore are extremely resistant to shock and
vibration and also hav eless current draw, resulting in increased battery and
alternator life allowing more power for other vehicle requirements.
$68.99
Truck-Lite Stop/Turn PL-2 Stripped End/Ring Terminal Plug
For use with single contact sealed incandescent lamps. Built as an 11" 16 gauge
GPT wire with tin plated brass terminals. PL-2 stripped end and ring terminal
plug.
$2.29
Truck-Lite 19 Series Bracket Mount
Features unique plug-in design for ease of installation. Low-profile,
extra-strength base. Suitable for PC requirements on a 45-degree angle. LED and
incandescent lamp kits available.
$3.49
Truck-Lite Stop/Turn/Tail Fit 'N Forget S.S. Plug
Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire;
tin plated brass terminals. Stripped end and ring terminal Fit 'N Forget S.S.
plug.
$4.99
Truck-Lite Rectangular Marker Clearance Light w/ Bracket Mount
Popular on owner/operator and show trucks. 2 Diode (red), 3 diode (amber) LED
pattern. Encapsulated electronics prevent damage from moisture and corrosion.
Not suitable for PC requirements.
$6.99
Truck-Lite Stop/Turn/Tail Fit 'N Forget S.S. Plug
Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire;
tin plated brass terminals. Female PL-3 Fit 'N Forget plug.
$7.19
Filter
1 - 60 of 149 items
