Light Mounts & Accessories

The solid state flange assembly will be made of a grey polycarbonate then incased in a chrome plated finish or a black finish. The M4FC and the M4FB shall have the ability to surface mount any M4 Super-LED series warning lights. The M4 series warning light is sold separately.

The solid state flange assembly will be made of a grey polycarbonate then incased in a chrome plated finish or a black finish. The M2FC and the M2FB shall have the ability to surface mount any M2 Super-LED series warning lights. The M2 series warning light is sold separately.

Fold Down Bracket for light bars. This foldover kit mounts to a flat surface,usually the pylon on the wrecker.

The is a universal control point that is needed if you have the exclusive Whelen light bar through Miller Industries but you want to use the light bar one quipment other than Miller Industries products with the MMO system. Thelight bar part number is 50003036.

The solid state beacon mirror mount is made of a heavy duty 11 gage stainless steel. The MIRROR20 shall consist of a flat surface mirror mount base with two mirror mount bracket clamps. The two mirror mount bracket clamps are a 1 1/8" clamp and a 7/8" clamp. The MIRROR20 has the ability to secure to the mirror bar with the aid of two U-bolts. The stainless steel parts are machined to a smooth finish then cleaned and degreased. Stainless steel mounting hardware is included with the MIRROR20.

This Deutsch female connector provides a waterproof connection when used with the W441D male connector. These connectors are commonly used with the Whelen strobe systems.

This is a surface mount adapter for the TIR6 Super-LED. Lighthead sold seperately.

500 Series flange kit with your choice of black or chrome finish.

The ION T-Series features Linear Super-LED technology and a sleek and low profile design, with a depth of only 1/2" (13mm).

This Deutsch male connector provides a waterproof connection when used with the W442D female connector. These connectors are commonly used with the Whelen strobe systems.

Buyers Products Fleet Series Drill-Free Light Bar Cab Mounts eliminates the need to drill mounting holes in your cab's roof. The rooftop mount conveniently bolts into the holes for your vehicle's OEM third brake light. The one piece construction makes installation quick and easy, and your vehicle's OEM brake light screws back into your vehicle's hardware once the install is complete. The mount 's low-profile design means improved aerodynamics.

This is a Black Flange Kit for the Whelen 500 Series Lightheads.

This solid state vertical flange assembly is made of a grey polycarbonate then incased in a chrome plated finish and includes a black santoprene gasket. These flanges have the ability to surface mount any two, three or four M6 Super-LED series warning lights. They include an installation guide. These installation kits also includes mounting hardware. The M6 series warning light is sold separately.

Magnetically attach an Elite Series Guardian Angel device to anywhere on nearly any hard hat.

This is a mounting bracket only, from Whelen. This mount will fit 2015 - 2019 Ford F-150, and 2017 - 2019 Ford F-250/F-350. This QuickFit is designed for fast and effortless installation without any vehicle damage. This is a bolt-on system that securely mounts QuickFit with no cutting or drilling for a strong and secure rooftop mount.

These chargers have options of both the AC adaptor or the car charger adaptor. Be sure to choose the correct model fit by checking the feature description.

Safety Cone Mount with Magnetic Mount easily attaches to any safety cone. Included magnetic mount.

Include black flange and a 4-wire 6"L pigtail.

A single mounting bracket and hardware for front or rear mounting of the TracerSeries under a light bar. See Tracer description for quantity qequired. NOTE:Tracer length will depend on light bar length and placement of mounting feet.Not for use with low profile mounting feet.

Offer the same functionality as the previous series, with updated switch labels and a lower price. Backlit switches are ideal for nighttime viewing. Legends are specifically designed for police and fire applications.

Guardian Angel tether attachment for a variaty of different applications: shirt, bike, wrist, and more.

The ION T-Series features Linear Super-LED technology and a sleek and low profile design, with a depth of only 1/2 (13mm). Bracket only, lightheads not included.

Buyers Products Self Adhesive Magnetic Mount Pad for Aluminum Cabs sticks to your cab roof to enable the use of magnetic mounts on aluminum cab trucks.

This is a replacement magnetic mount base that can be used on various surfaces.

Protect your Whelen L31/L32 Super LED beacons from low-hanging branches on residential streets with this Branch Guard Kit. The set includes a new mounting base with protector and hardware to install the C-shaped brackets perpendicular to one another. When roof mounted, the kit should keep low-hanging obstructions from damaging your beacon lens.

This is a branch guard for the L10, L21 & L22 series high profile beacons. Light sold seperately.

Heavy-duty, compact Mounts are designed specifically for ION Series Super-LED Lights.

The solid state flange assembly will be made of a grey polycarbonate then encased in a chrome plated finish or a black finish. The M9FC and the M9FB shall have the ability to surface mount any M9 Super-LED series warning lights. The M9 series warning light is sold separately.

This is a mounting bracket for the AWD13 Mini Light bar.

The solid state conversion flange assembly is made of a grey polycarbonate then incased in a chrome plated finish and includes a 1/16" die cut black neoprene gasket and black santoprene reflector gasket. The M6FC600 converts a preexisting 600 series light mounting area to the M6 series light. The M6FC600 shall have the ability to surface mount any M6 Super-LED series warning lights. The M6FC600 includes an installation guide. The M6FC600 installation kit will include mounting hardware. The M6 series warning light is sold separately.

The M6P15C has the ability to be installed as a 15° surface mount scene light housing. This light consists of 15° polycarbonate chrome plated surface mount flange with a 1/16" die cut black neoprene gasket and black neoprene seal. This light has the ability to install one M6 series scene lights. This housing is available in chrome or black.

Bike/Rail Rubber Mount with Magnetic Mount allows your Elite Series device securely attaches to any bike rail/bar and allows for easy on/off mobility.

This solid-state light adaptor assembly from Whelen is made of polycarbonate chrome plated light bucket. The M6HDLMTK has the ability to mount the M6 series light in either an ATI or KD light housing.

Arm Strap with a magnetic mount attaches to any Guardian Angel Device to create an LED Armband Saftey Light. The strap is compatible with both Elite and Micro devices.

Designed for durability and simplistic use, Whelen provides various power control centers and switches to accommodate all control center needs. This WeCan Controller, Control lights and Traffic Advisor functions from a single keypad with a three-position slide switch and six pre-programmed push-buttons for Justice WeCan light bars.

This black or chrome bezel mounting hardware can be used with the 3930 Series.

The solid state brush guard assembly will be made of a 12 gage stainless steel with a black powder coated finish to protect from extreme environmental conditions. The M7BRUSH shall have the ability to surface mount with any M7 Super-LED series warning lights. The M7 series warning light is sold separately.

ECCO provides a replacement 18 LED grille light.

Similar to PCC6W, this switch box from Whelen offers six lighted, 25-amp SPST switches, except the last on/off switch is replaced with a momentary switch.

This bracket has the ability to be installed as a universal mounting bracket for M7 series lights. The bracket will have the ability to mount one M7 series light and it is made of aluminum alloy. The M7BKT1 shall include a mounting kit with mounting hardware and mounting instructions. The M7 series light shall be purchased separately.

This is a snap close clip mount that can either be screwed into the bottom of the device or attached via a strong magnet. The clip attaches to straps, lapels, and epaulets to provide extra security.

Buyers Products Drill-Free Light Bar Cab Mount for Ford® Trucks makes it easy to mount additional strobe and work lights on full-sized and compact Ford® pick-up trucks. With the large 22 in. by 10 in. platform, this mount can accommodate a wide range of light bars, beacons, work lights, strobe lights, antennas, and other accessories weighing less than 30 pounds.

This ION DUO series linear-LED universal light from Whelen offers individual control of the white and amber light and includes a universal mount, Scan-Lock flash patterns and a five-wire pigtail.

This 5 inch branch guard is used with the 6550, 6650, 6710 6750, 7160, 7930, 7945 and 7975 Series.

Buyers Products Drill-Free Light Bar Cab Mount for GM/Chevy Trucks makes it easy to mount additional strobe and work lights on your vehicle. With a large 22 in. by 10 in. platform, it can accommodate a wide range of light bars, beacons, work lights, strobe lights, antennas, and more, up to 30 lb. The lightweight aluminum mount weighs less than 8 pounds. Drill-free installation keeps your vehicle free from holes and other marks. The mount slots into your OEM third brake light location. Great for use on construction fleets, service bodies, and utility trucks.

The solid state conversion flange assembly is made of a grey polycarbonate then incased in a chrome plated finish and includes a 1/16" die cut black neoprene gasket and black santoprene reflector gasket. The M7FC700 converts a preexisting 700 series light mounting area to the M7 series light. The M6FC600 shall have the ability to surface mount any M6 Super-LED series warning lights. The M6FC600 includes an installation guide. The M6FC600 installation kit will include mounting hardware. The M6 series warning light is sold separately.

This Universal-Mount Kit by Superior Signal can be used with the LED Traffic Manager Arrow Light SS99.

Made of high quality materials. Charges and holds one flashlight. Cord not included. For use with STREAMLIGHT models: 2RVG6, 75001, 75013, 75014, 75306, 75311, 75503, 75525, 75710, 75712, 75713, 75734, 75735, 75737, 75810, 75812, 75813, 75834, 75837, 76001, 76014, 76501, 76514, 96224, 96225, 75711, 76002 and 76000.

Please Note: Product Discontinued - ALL SALES FINAL!

Synchronize up to six LED units. Fully encapsulated circuitry for vibration and water protection. Include 6"L cable, connector and snap-on black bezel.

This solid state conversion flange assembly is made of a grey polycarbonate then incased in a chrome plated finish with a 1/16" die cut black neoprene gasket and black santoprene reflector gasket. This M4FC400 will convert a preexisting 400 series light mounting area to the M4 series light. The M4FC400 has the ability to surface mount any M4 Super-LED series warning lights. The M4FC400 includes an installation guide. The M4FC400 installation kit will include reflector gasket, conversion gasket, and the mounting hardware. The M4 series warning light is sold separately.

All Guardian Angel Devices come with a built-in magnet which securely attach to any metallic surface. The Nonmetallic surface 3M adhesive & screw magnetic mount easily attaches to any nonmetal surface, such as alumnium, fiberglass, plastic, rubber, wood, etc. Use this mount to easily attach your device to your motorcycle/scooter, boat, kayak or ATV or any other semi-flat surface.

This Guardian Angel Bike Rail Strap securely attaches to any bike rail/ bar and allow for an easy on/ off mobility.

Boat/Marine Mount with Magnetic Mount easily attaches to any hard surface (screw) including boats, trees, ATV? Ts and more.

Add a touch of style to your exterior lighting package with a chrome flange from Whelen. This replacement flange fits the Ion Mini T Series lighting.

The bracket will have the ability install a single M2 series warning light. The M2PEDB and M2PEDC will consist of a pedestal mount bracket and pedestal mount base. The universal pedestal mounting bracket and base will be made of a durable polycarbonate with a polished chrome plated or black finish to protect from extreme environmental conditions. The M2PEDB and M2PEDC will include a mounting kit with mounting hardware. The M2 light is purchased separately.

The solid state brush guard assembly will be made of a 12 gage stainless steel with a black powder coated finish to protect from extreme environmental conditions. The M4BRUSH shall have the ability to surface mount with any M4 Super-LED series warning lights. The M4 series warning light is sold separately.

Flat mount kit for Federal Signal 24- through 61-inch light bar lengths.

With the combination of a stop/tail/turn and back up light, these classic-style lights feature long-running LEDs that resist water and vibration. Rugged polymer housing and lens with (3) mounting studs on the back.

This 7 inch branch guard is used with the 6570, 6670, 6720, 6770, 7935, 7950, 7960, 7970 and 7980 Series.