Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
30 Series high profile LED marker clearance light is designed with 8 diodes and
built as a red round light. Most advanced and cost effective 2" clearance and
marker lamp. LEDs have no filament, therefore are not susceptible to shock and
vibration. Less current draw, resulting in increased battery and alternator
life while allowing more power for other vehicle requirements. SAE PC-rated for
combination clearance/marker applications.
Most advanced and cost effective 2-1/2'' clearance and marker lamp. SAE
PC-rated for combination clearance/marker applications. Flange gasket available
for additional protection. Electronics completely sealed in epoxy to resist
corrosion and moisture.
These 33 Series 3/4" Sealed LED Lights from Truck-Lite are the worlds smallest
LED marker for the transportation industry. Choose from a Red or Yellow light,
both colors come with a clear lens and they are completely sealed in epoxy to
resist corrosion and moisture. These lights draw less current, which allows for
more power on your other vehicle requirements.
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehilce requirements. Most advanced and cost
effective 2-1/2" clearance and marker lamp. SAE PC-rated for combination
clearance/marker applications.
Most advanced and cost effective 2-1/2" clearance and marker lamp. SAE PC-rated
for combination clearance/marker applications. Flange gasket available for
additional protection. Electronics completely sealed in epoxy to resist
corrosion and moisture.
Full pattern light output. Popular on show truck applications. Designed for
areas with limited space. Not suitable for PC requirements. Hardwired design
eliminates pin corrosion.
This standard lamp has 2 diodes. Less current draw, resulting in increased
battery and alternator life while allowing more power for other vehicle
requirements. Electronics completely sealed in epoxy to resist corrosion and
moisture.
World's smallest LED marker lamp for the transportation industry. The light
exceeds legal requirements and is designed as a hardwired lamp easily
retrofitted. LEDs draw less current, allowing more power for other vehicle
requirements. Electronics completely sealed in epoxy to resist corrosion and
moisture. Offers trailer engineers and manufacturers new trailer and rear door
structure design flexibility. Requires 3/4" mounting hole, material thickness
for flange is 040"- 250", material thickness for crommet is 125" - 250".
Fits in most narrow header rails and mount vertically or horizontally.
Long-life 15,000-hour bulb. Snap-lock tabs allow quick and easy installation.
Suitable for PC requirements on a 45-degree angle.
30 Series high profile LED marker clearance light is designed with 8 diodes and
built as a red round light. Most advanced and cost effective 2" clearance and
marker lamp. LEDs have no filament, therefore are not susceptible to shock and
vibration. Less current draw, resulting in increased battery and alternator
life while allowing more power for other vehicle requirements. SAE PC-rated for
combination clearance/marker application.
"LED" represents the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents. Available in Amber and Red.
Popular on owner/operator and show trucks. 2 Diode (red), 3 diode (amber) LED
pattern. Encapsulated electronics prevent damage from moisture and corrosion.
Not suitable for PC requirements.
Highest quality LED lighting products on the market. Most advanced and cost
effective 2" clearance and marker lamp. LEDs have no filament, therefore are
not susceptible to shock and vibration. Less current draw, resulting in
increased battery and alternator life while allowing more power for other
vehicle requirements. SAE PC-rated for combination clearance/marker
applications.
Innovative optic design allows one PC-rated lamp the ability to function as
two. Draws less current, allowing more power for other vehicle requirements.
Uses standard mounting holes and accessories. PC-rated lamps have 8 diode
pattern.
Lamps operate in minor and major output levels; major function activated by the
brake function or turn signal. Yellow Major function is 3 times brighter than
minor function. Red Major function is 7 times brighter than minor function.
Provides marker/clearance solution that requires no mounting brackets or
installation screws. Lamps adhere directly to application surface through use
of heavy-duty adhesive backing. Electronics are completely sealed in epoxy to
resist damage caused by moisture and corrosion. Rear exit wire version requires
a 3/8" mounting hole, and self-seals hole upon installation. Care should be
taken for proper installation.
Worlds smallest LED marker lamp for the transportation industry. This light
provides increased visibility when braking or turning functioning as a marker,
auiliary turn, and auxiliary stop when properly installed. Best in class
auxiliary brake function is seven times brighter tha marker function. Marker
function exceeds P2 legal requirements. The hardwired lamp with a 180 male
bullet design can be easily retrofitted. LEDs draw less current, allowing more
power for other vehicle requirements and have no filament, therefore are not
susceptible to shock and vibration. Electronics sealed in epoxy to resist
corrosion and moisture and backed with a limited lifetime warranty. Light
complies with FMVSS-108 marker/clearance requirements.
Lens and housing are sonically sealed. High-impact polycarbonate construction.
Meets PC requirement on a 45-degree angle in mounting devices #10708, #10720,
#00803 or #00804. Replaces Signal-Stat 1010 and 1011 series.
Lens and housing are sonically sealed. High-impact polycarbonate construction.
12V, 15,000-hour-rated bulb life and meets PC requirement on a 45-degree angle
in mounting devices.
These 33 Series 3/4" Sealed Red LED Lights from Truck-Lite are the worlds
smallest LED marker for the transportation industry. This light comes with 3
Red LED Lamps with .180 bullets and grommet mounts. All 3 lights are connected
to the same power cord. Lights come with a polycarbonate lens and housing, PVC
grommets, Nylon flange and 16 gauge wire.
Wabash and Monon replacement. Lamp designed for PC requirements on a 45-degree
angle in mounting devices #30720, #00801, #00803, #00804 or surgace mount
flange. Replaces Signal-Stat 1030 series.
Unique shock-mount extends bulb life with 15,000-hour rated bulb life. Sealed
polycarbonate lens and housing. Meets PC requirements on a 45-degree angle
using all mounting devices.
Unique combination of colored LEDs with clear lens draws attention to the lamp
only when lit. Electronics completely sealed in epoxy to resist corrosion and
moisture. Lower power draw, allowing more power for other vehicle requirements.
Engineered to feature one bright and economical light emitting diode. Uses
standard PL-10 connector. When properly mounted, exceeds FMVSS-P2 DOT
requirements for marker/clearance performance. Designed with impact-resistant
polycarbonate. Sealed lens and housing locks moisture out. Snap fit grommet
requires no screws for installation. LEDs do not have a filament, therefore are
not susceptible to shock and vibration damage, which is a major cause of
failure for lamps with an incandescent bulb. Epoxy-encapsulated electronics
prevents damage from moisture and corrosion. Popular on owner/operator and show
trucks. Lamps come with Truck-Lite 2-year limited warranty.
30 Series high profile LED marker clearance light is designed with 8 diodes and
built as a red round light with a gray flange mount. Most advanced and cost
effective 2" clearance and marker lamp. LEDs have no filament, therefore are
not susceptible to shock and vibration. Less current draw, resulting in
increased battery and alternator life while allowing more power for other
vehicle requirements. SAE PC-rated for combination clearance/marker
applications. Fit 'N Forget M/C lamp connection.
Slim 3/4" wide design making the lamp a perfect solution for narrow rail
designs. Must be mounted horizontally. SAE PC-rated for combination
clearance/marker applications.
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicle requirements. Most advanced and cost
effective 2-1/2" clearance and marker lamp. SAE PC-rated for combination
clearance/marker applications.
30 Series low profile LED marker clearance light is designed with 6 diodes and
built as a red round light with a gray flange mount. Most advanced and cost
effective 2" clearance and marker lamp. LEDs have no filament, therefore are
not susceptibe to shock and vibration. Less current draw, resulting in
increased battery and alternator life while allowing more power for other
vehicle requirements. SAE PC-rated for combination clearance/marker
applications.
Designed to fit in tight spaces, fits in most narrow header rails. Can be
mounted vertically or horizontally. Snaplock tabs allow quick and easy
installation. Replaces Signal-Stat 1900 series.
Ideal for show trucks, highway, mowing, municipal and farm equipment. Unique
LED array displays full pattern output. Side marker reflex reflector. LEDs have
no filament, therefore are extremely resistant to shock and vibration and have
less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicle requirements.
Designed to fit applications requiring minimal space and is less susceptible to
shock and vibration. Uses standard mounting holes and accessories. Not suitable
for PC applications. Draws less current, allowing more power for other vehicle
requirements. Direct pin-to-circuit board solders assure vibration-resistant
contacts.
Innovative optic design allows combination lamp to function as two. Draws less
current, allowing more power for other vehicle requirements. Designed to fit
applications requiring minimal space. Must be mounted horizontally. Standard
red lamps have 2 diode pattern and standard yellow lamps have 4 diode pattern.
Innovative optic design allows one PC-rated lamp the ability to function as
two. Draws less current, allowing more power for other vehicle requirements.
Uses standard mounting holes and accessories.
Hardwired design eliminates pin corrosion. SAE PC-rated for combination
clearance/marker application. The light fits standard mounting holes. LEDs have
o filament, therefore are extremely resistant to shock and vibration. LEDs have
less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicle requirements. Epoxy-encapsulated
electronics protect the lamp from damage caused by chemicals and moisture.
Unique LED array displays full pattern output.
This omnivilt lamp has three diodes. Less current draw, resulting in increased
battery and alternator life while allowing more power for other vehicle
requirements. Electronics completely sealed in epoxy to resist corrosion and
moisture.
Highest quality LED lighting products on the market. Most advanced and cost
effective 2" clearance and marker lamp. LEDs have no filament, therefore are
not susceptible to shock and vibration. Less current draw, resulting in
increased battery and alternator life while allowing more power for other
vehicle requirements. SAE PC-rated for combination clearance/marker
applications.
30 Series high profile LED marker clearance light is designed with 8 diodes and
built as a red round light with a gray flange mount. Most advanced and cost
effective 2" clearance and marker lamp. LEDs have no filament, therefore are
not susceptible to shock and vibration. Less current draw, resulting in
increased battery and alternator life while allowing more power for other
vehicle requirements. SAE PC-rated for combination clearance/marker
applications.
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicle requirements. Most advanced and cost
effective 2-1/2" clearance and marker lamp. SAE PC-rated for combination
clearance/marker applications.
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicles requirements. Faster illumination offers
significant safety benefit for following drivers to react quicker, resulting in
an average distance of 3' for every 10 mph. LEDs have no filament, therefore
are imprevious to shock and vibration. Flange mounts are permanently affixed to
the lamp and mounts to the rear of vehicles. Designed to comply with FMVSS 108
and comes with a limited lifetime warranty.
High-impact Permastat housing protects against rust and corrosion. Snap-on lens
makes bulb and lens replacemet easy. With the two bulb design, if one burns
out, the other remains lit. Lamp meets requirements with only one bulb. Not
suitable for PC requirements.
High-impact Permastat housing protects against rust and corrosion. Shock/Mount
(1213 model) for maximum bulb life. Snap-on lens makes bulb and lens
replacement easy. Two bulb design if one burns out, the other remains lighted.
Lamp meets requirements with only one bulb. Not suitable for PC requirements.
Popular on owner/operator and show trucks. Standard PL-10 connection. Unique 13
diode starburst light output. Encapsulated electronics prevent damage from
moisture and corrosion.
This clearance and marker light is designed with a Fit 'N Forget M/C lamp
connection. Most advanced and cost effective 2" clearance and marker lamp. P2
and P3 standards met.
Innovative optic design allows combination lamp to function as two. Draws less
current, allowing more power for other vehicle requirements. Designed to fit
applications requiring minimal space. Must be mounted horizontally. Standard
red lamps have 2 diode pattern and standard yellow lamps have 4 diode pattern.
Popular replacement for cab marker or corner trailer applications. LEDs have no
filament, therefore are not susceptible to shock and vibration. Meets SAE 592e
standards. Less current draw, resulting in increased battery and alternator
life while allowing more power for other vehivle requirements. The red lamp has
a 2 diode pattern and the yellow lamp has a 5 diode pattern.
Reflectorized lens on colored lens versions. Optional mounting and sealing
gasket available to improve seal between lamps. Less susceptible to shock and
vibration.
Popular in trailer and body applications. Features unique plug-in design for
ease of installation. Must be mounted horizontally. Low-profile, extra-strength
base.
Innovative optic design allows combination lamp to function as two. Draws less
current, allowing more power for other vehicle requirements. Designed to fit
applications requiring minimal space. Must be mounted horizontally. PC-rated
lamps meets requirements when mounted on a 45-degree angle. Standard red lamps
have 2 diode pattern. PC-rated red lamps and standard yellow lamps have 4 diode
pattern.
Innovative optic design allows combination lamp to function as two. Draws less
current, allowing more power for other vehicle requirements. Designed to fit
applications requiring minimal space. Must be mounted horizontally. PC-rated
lamps meets requirements when mounted on a 45-degree angle. Standard red lamps
have 2 diode pattern. PC-rated red lamps and standard yellow lamps have 4 diode
pattern.